Contact Us
Com-Power AL-130R - Rent Active Loop Antenna 9 kHz to 30 MHz
Associated Emissions Rental Equipment
Description
Overview
The Model AL-130R is compliant with CISPR 16-1-4. It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more. The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio. As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing.
The AL-130R is an Active Loop Antenna (loop size: 19” x 19” [0.5 m x 0.5 m] with electrostatic shield), operating over the frequency range of 9 kHz to 30 MHz. It has a built-in, low-noise preamplifier, which increases overall measurement sensitivity as well as the overall signal to noise ratio. The antenna is battery powered (rechargeable 6V NimH battery pack). The AL-130R can also be powered by the supplied charger/power adapter. The front panel has LED indicators for RF ON/OFF, power, battery low, amplifier saturation, as well as charging status.
Data SheetUser ManualSpecifications
|
Frequency Range |
9 kHz to 30 MHz |
|
Loop Size |
19” x 19” (0.5 m x 0.5 m) |
|
Nominal Impedance |
50 ohms nominal |
|
AC Adapter Output Power |
6 VDC (unregulated), 500 mA |
|
Battery Type |
6 VDC NimH (rechargeable) |
|
Average Battery Life |
10-12 hours |
|
E-Field Antenna Factors |
13.4 to 16.4 (average: 14.9) [dB(m-1)] |
|
Saturation Leve |
>1 V/m / >120 dBμV/m (>2.65 mA/m) / >68.5 dBμA/m) |
|
Antenna Factor Variation |
±1.5 dB |
|
Sensitivity (typical) |
-3 dBuA/m @ 10 kHz & -44 dBuA/m @ 1 MHz |
|
RF Connector |
BNC-type (female) |
|
Dimensions (H x W x D) |
20.1” x 19.7” x 10.6” [51 x 50 x 27 cm] |
