Showing 1 - 16 of 18 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
FCC Part 15 Pre-Compliance Emissions Kit Connected FCC Part 15 Pre-Compliance Emissions Side
FCC Part 15 Pre-Compliance Emissions Kit - Rent Analyzer & LISN
  • Kit Includes Analyzer, LISN, & Transient Limiter
  • EMCO 3810 Max 125 Volts 10 Amps AC
  • Compliant for FCC Part 15 Subpart B
Siglent SSA3075X-R - Front Side Siglent SSA3075X-R - Front Top
Siglent SSA3075X-R - Rent 7.5 GHz Spectrum Analyzer
  • Frequency Range 9 kHz - 7.5 GHz
  • Resolution bandwidth (RBW): 1 Hz~3 MHz
  • Displayed Average Noise Level -165 dBm/Hz
Rohde & Schwarz ENV216 Front Side Rohde & Schwarz ENV216 front
Rohde & Schwarz ENV216 - Rent 50µH 16 Amp LISN
  • Frequency Range 9 kHz to 30 MHz
  • 50µH V-network Max 16 Amps /240 VAC
  • Built-in Transient Limiter, Attenuator, & Filters 
In Stock
Com-Power LI-220C Front Side Com-Power LI-220C Front
Com-Power LI-220C - Rent 50µH 270 Volts 20 Amp LISN
  • Frequency Range 9 kHz to 30 MHz
  • Max 270 V/20 A AC or 380 V/14 A DC
  • Fully Compliant with CISPR 16-1-2/ANSI C63
ETS-Lindgren EMCO 3810 Front Side ETS-Lindgren EMCO 3810 Front
ETS-Lindgren/EMCO 3810/2NM - Rent 50µH 10Amp LISN
  • Frequency Range: 9 kHz to 30 MHz
  • Maximum 10 Amps 125 Volts AC
  • Inductors: 250 & 50 Microhenry (air-core)
In Stock
TekBox TBFL1 - Side Front TekBox TBFL1 - Front
TekBox TBFL1 - Rent Transient Limiter & 10dB Attenuator
  • Frequency Range 9 kHz to 600 MHz (Pass-band)
  • Prevent Damage to Instrument from Voltage Spikes
  • Rented with LISN/AN or Analyzer
Com-Power LIT-930A - Front Side Com-Power LIT-930A - Front
Com-Power LIT-930A - Rent 9kHz-30MHz Transient Limiters
  • Frequency Range 9kHz to 30MHz (Pass-band)
  • Prevents Damage to Analyzer & 10 dB Attenuation 
  • Typically Rented with LISN/Artificial Network
In Stock
ETS-Lindgren 3142E Front Side ETS-Lindgren 3142E Front
ETS-Lindgren 3142E - Rent BiConiLog Antenna 30 MHz - 6 GHz
  • Frequency Range 30 MHz to 6 GHz
  • Ideal for Sweeping Across Frequency Range
  • Average 2:1 VSWR Above 50 MHz
In Stock
TekBox LISN Mate TBLM01 - Front Side TekBox LISN Mate TBLM01 - Front
TekBox TBLM01 - Rent LISN Mate Noise Splitter
  • Noise Splitter into Common & Differential Mode
  • Frequency Range 30 kHz – 110 MHz
  • Commonly used with 5uH LISNs
In Stock
Siglent SSA3032X Plus Front Side Siglent SSA3032X Plus Front Top
Siglent SSA3032X Plus - Rent 3.2 GHz Spectrum Analyzer
  • Frequency Range 9 kHz - 3.2 GHz
  • Resolution bandwidth (RBW) 1 Hz~1 MHz
  • Tracking Generator 100 kHz – 3.2 GHz
In Stock
Rigol DSA832E - Front Side Rigol DSA832E - Front Top
Rigol DSA832E-TG - Rent 3.2 GHz Spectrum Analyzer
  • Frequency Range 9 kHz - 3.2 GHz
  • RBW 10 Hz & DANL <-161 dBm (Typical)
  • Includes License for EMI Software
Monthly Rental-$300
In Stock
TekBox TBCG1 - Front Side TekBox TBCG1 - Front
TekBox TBCG1 - Rent Radiating Comb Generator
  • Frequency Range 100MHz-6GHz 
  • Ideal for Verification of Emissions Setup
  • Rented with Analyzer/Antenna
In Stock
EMC Instruments CG 100/500 - Front Side EMC Instruments CG 100/500  - Front
EMC Instruments CG 100/500 Conducted Comb Generator 100kHz-400MHz
  • Conducted Comb Generator (100 kHz or 500 kHz)
  • Frequency Range: 100 kHz - 400 MHz
  • Used for Verificaiton of Conducted Emissions Setup
In Stock
Com-Power LI-1100C Front Side Com-Power LI-1100C Front
Com-Power LI-1100C - Rent 50µH 100 Amp 440 VAC LISN
  • Frequency Range 150 kHz to 30 MHz
  • Max 440 Volts AC & 620 Volts DC
  • Fully Compliant with CISPR 16-1-2/ANSI C63
In Stock
Com-Power LI-150C - Front Side Com-Power LI-150C - Front
Com-Power LI-150C - Rent 50µH 50Amp 270VAC LISN
  • LISN 150 kHz - 30 MHz 50Amps/270 Volts AC
  • CISPR 16-1-2 & ANSI C63.4 Compliant
  • Transient Limiters Available with Rental
Rigol DSA815-TG - Front Side Rigol DSA815-TG - Front Top
Rigol DSA815-TG - Rent 1.5 GHz Spectrum Analyzer
  • Frequency Range 9 kHz - 1.5 GHz
  • RBW 10 Hz & DANL <-155 dBm (Typical)
  • Includes License for EMI Software
Monthly Rental-$200
In Stock