IEC 61000-4-5 - Surge/Combination Wave System Rentals
4kV Combination Wave Generators
- Teseq, EM Test, KeyTek, Haefely, & EMC Parnter
- Rent up to 15kV Combination Wave Systems
- ISO 17025 Calibrations & Often Laptop
- Many Offer EFT/Burst IEC 61000-4-4
- Large Inventory of CDNs & Accessories
- Rental External Variac/Transformer for Dips
≤ 4kV Pulse Generators
1.2/50us Systems
6kV Pulse Generators
1.2/50us Systems
≥ 6kV Combination Wave
High Voltage Generators
Coupling Decoupling
CDN Equipment Rental
EMI Accessories
Monitoring & Devices
- Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
- Built-in single phase CDN Max 300 V/16 A AC or DC
- Laptop with iec.control software included
Sale price
Monthly Rental -
$1,550
- 4.1 kV Surge & 4.4 kV EFT/Burst Generator
- Built-in CDN Max 300 Volts 16 Amps AC & DC
- Model: IMU-MGS F4-S4-P
- 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
- Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
- Compliant to ANSI Coupling Requirements
- 5 kV Surge & EFT Immunity Test System
- Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
- Capabilities for Voltage Dips Testing with DIP 116
Sale price
Monthly Rental -
$1,400
- Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
- Built-in single phase CDN Max 300 V/32 A AC or DC
- Laptop with iec.control software included
- 15 kV/ 7.5 kA Surge Generator
- External CDN 3153-S63 Included
- Compliant to IEC 61000-4-5
- Configured for 5.5 kV EFT/Burst Immunity Testing
- Built-in CDN Max 300 V/16 A AC
- Rent Capacitive Clamp for Data Line Testing
- 6.6 kV Surge, 4.8 kV EFT, & 6.6 kV 100 kHz Ringwave
- External Single Phase CDN Max 270 V/16 A AC or DC
- Laptop with WIN 3000 Software Included
Sale price
Buy Used -
$21,000
- 4.4 kV Surge & 4.8 EFT Immunity Test System
- Built-in single phase CDN Max 260 V/16 A AC or DC
- Model/Version: NSG 3040-IEC
- Configured for 6.6 kV Surge & 5.5 kV EFT/Burst
- Built-in single phase CDN Max 300 V/16 A AC or DC
- Model: NSG 3060A-IEC (IEC 61000-4-4/5)
- 6.6kV Surge & Ringwave, 4.8kV EFT Generator
- Typically used for Single Phase EUT
- Includes Teseq CDN 3061 (270V/16Amps)
Sale price
Buy Used -
$29,000
- Coupler for Surge, EFT, & Ringwave Pulses
- Maximum 480 Volts 32 Amps AC/DC
- Automatic Coupler for NSG 3060/NSG 3040
Sale price
Buy Used -
$11,000
- CDN for up to 8 wire unshielded twisted pair (UTP)
- Max Surge Voltage 2 kV Current 50 Amps
- Coupling to 1, 2 or 4 pairs
- Coupler for Surge to IEC 61000-4-5
- Max 100 Amps 690 V AC or 620 V DC
- Manual Coupler for NSG 3060 or NSG 3040
Sale price
Buy Used -
$17,000
- Coupler for Surge, EFT, & Ringwave Pulses
- Maximum 270 Volts 16 Amps AC/DC
- Rented with Teseq NSG 3060 Test System
- 6 kV Surge, 4.4 kV EFT, & 6 kV 100 kHz Ringwave
- Built-in CDN Max 250 V/16 A AC or 100 V/10 A DC
- Capabilities for Voltage Dips Testing
Overview
EN/IEC 61000-4-5 - 2014 relates to immunity requirements for unidirectional surges caused by over-voltages from switching and lightning transients. This standard defines ranges of test levels, test equipment, test setups, and test procedures for equipment under test (EUT). The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to this type of phenomena. It specifies that direct injections of lightning currents (direct lightning strikes) are not considered in this standard. The most recent 2014 version 3 cancels out previous publications and gives specifications for 10/700 µs combined wave generator. The most changes from version 2 fall underneath the test procedures section of the standard. This Standard can be purchased on the IEC Webstore.
Testing
This IEC standard is based on a surge, a transient wave of electrical current, and is tested for by Immunity Test Equipment. This standard defines two Combination Wave pulses (Open Circuit Voltage and Short Circuit Current). It set the number of pulses from the EMC test equipment to a.c. ports, d.c. ports, and interconnection lines, at 5 positive and 5 negative (a.c. at 0°, 90°, 180°, & 270°). The time per each pulse must be one minute or less and the EUT must be under operating conditions while the EMC testing is occurring.
Generators
For EN/IEC 61000-4-5 combination wave/surge rentals we offer a variety of different EMI test equipment suppliers including Teseq, EMC Partner, EM Test, Haefely, and many others to meet customer requirements and preferences. These products all have the capability to meet the surge requirements and each have unique testing and reporting capabilities. The most common rental units for surge testing are the NSG 3060, Axos 8, NX5, and UCS500n7. We also provide many accessories that may be required to complete unique and specific testing requirements. These EMI surge products come with an A2LA accredited calibration and free technical support included with the rental. 
