IEC 60601-2-25 Medical Diagnostic Transient/Surge & RF Rentals

Defibrillation Simulator Equipment

In Stock

Surge Tester Features 

      • IEC 60601-2-25 and -2-27:2011 Test Solution
      • ISO 17025 Accredited Calibration included
      • 20 Second Period Pulse Delivery
      • Front panel indicates polarity
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The MegaPulse Debif D5-5P by Compliance West tests to 5,000 volts including direct energy readout (J) for energy reduction tests, built-in pass/fail reference. Our EMC test equipment rentals come with an A2LA accredited calibration and technical support. This medical based immunity testing equipment displays selected output voltage on digital front panel. This system meets a variety of defibrillation simulation requirements for a diverse set of applications.

The Immunity Generator defibrillator proof test set to The Mega Pulse DefibD5-PF offers a USB computer connection for remote operation. This allows for increased flexibility in setups, and offers more robust and problem resistant connection. On the test equipment side, the interface is RS-232, which offers a stronger, more error-free protocol for more trouble-free operation.

This Compliance West medical based product is designed to meet IEC 60601-1 figure 10, IEC60601-1 figure 11, IEC 60601-2-34,2-49; EC-13, EC-53 and many others. This immunity product provides testing solutions for many standards that require 5000v with different output wave shaping. 

Defib-proof & Energy Reduction Tester

Conducted Immunity Generator Features 

      • 5kV Testing per IEC 60601-1:2005
      • 20 Second Period Pulse Delivery
      • Free Technical Support & 2 Days Free Transit
      • Front panel indicates polarity
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The MegaPulse Debif 5P by Compliance West Defibrillator Test set provides up to  5,000 volts to meet a variety of EMI standards.  A2LA accredited calibration is included in the EMC rental equipment price. This product includes a newly design resistor bank, inductor and capacitors allow output to be in accordance with circuit simulations.

This Immunity Test Generator is completely redesigned to allow accurate energy measurement during the testing per IEC 60601-1:2005. ith an oscilloscope connected to the energy measurement output jack on the Defib-5 rear panel, accurate energy measurements are assured by our redesigned resistor bank which not only measures 100 ohms statically when checked before each test, but remains within 5% of the nominal value while the test is being conducted, which is essential for accurate energy measurement.

This test equipment is designed to providing testing per EN IEC 60601:2005 with pass/fail box. This Compliance west product can conduct also conduct testing to a variety of standards including EN IEC 60601-2 (27,34,&49), EN IEC 60601-1:2006 Figure 11, EC-13, and EC-53. All these tests use the same 5000V source with differences in output waveshaping.

 

Continuous Wave Simulator 80W

In Stock

Conducted & Radiated RF Immunity Test Setup Features

      • Conducted RF Solution - IEC 61000-4-6
      • Laptop & ISO 17025 Calibration Included
      • Integrated signal generator 9 kHz - 1 GHz
      • Pulse Modulation 1Hz-1KHz (10% to 90%)
      • Free Technical Support & 2 Days Free Transit
      • Variety of accessories, CDNs, & Coupling Clamps
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Rent the CWS 500 N1.4 by the most common of the CWS 500N series by EM Test designed to provide testing solutions to IEC 61000-4-6 with a 9kHz-1Ghz built in signal generator. We rent a variety of accessories and test equipment associated with this series of RF immunity including the CWS 500N2  and many testing accessories. All of our RF immunity generators come with ISO 17025 accredited calibration and technical support. 

The CWS 500N 1.4 was created to test to EN/IEC 61000-4-6IEC 60601-1-2ISO 11452-4, and many others. This test system has a diverse range of applications for testing to the 1kHz 80% Am singal as well as a 2Hz 80% AM signal to test medical appliances. This unique single box solution provides software allowing for many reprogrammed standards to be run efficiently. 

The EM Test CWS 500n1 is also equipped with a 1 GHz current monitor the can be used up to 1 GHz by means of an external amplifier. As an added bonus the CWS 500n1 provides a 1Hz PM signal with 50% duty cycle required for test safety equipment. A diverse set of accessories are available for rent with the CWS 500N1 meeting any testing needs.

Options:
  • 1 Week Rental $700.00
  • 2 Week Rental $1,050.00
  • 1 Month Rental $1,400.00

EMC Immunity Test Sytem

In Stock

Conducted & Radiated RF Immunity Test Setup Features 

      • Conducted & Radiated Solution - IEC 61000-4-6
      • Laptop & ISO 17025 Calibration Included
      • Integrated signal generator 9 kHz - 1 GHz
      • Integrated class A power Amplifier 35W, 45W, 80W
      • Free Technical Support & 2 Days Free Transit
      • 3 power meter inputs 9 kHz to 1 GHz
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The NSG4070 by Teseq is a multifunctional device for carrying out EMC testing for conducted and radiated immunity testing to a variety of standards. Take advantage of ISO 17025 calibrations, a variety of accessories, a quick delivery on this compact equipment.This Conducted RF Immunity Test Generator modular set-up using internal (80 Watts) or external amplifiers enables a large variety of applications. 

The powerful and easy to use firmware from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front pane. 

The NSG 4070 was designed to testing in accordance to EN/IEC 61000-4-6, EN/IEC 60601-1-2, EN/IEC 61000-4-20, EN/IEC 61000-4-21 and several automotive standards. This immunity test product provides various sweep methods which can be selected to suit each particular testing parameter. This Teseq conducted RF test equipment also allows for all coupling methods to be simply and easily connected and calibrated.

Linear Broadband Power Amplifier

Broadband Power Amplifier Features 

      • Milmega Linear Broadband Power Amplifier 
      • 800Mhz-6Ghz 50 Watts Class A Operation
      • Mismatch tolerant and unconditionally stable
      • Calibrated Dual Directional Coupler fitted as standard
      • Free Technical Support & 2 Days Free Transit
      • Ethernet, USB, RS232 & GPIB fitted as standard
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The AS0860 amplifier has the frequency range of 800MHz to 6GHz up to 50 watts and be controlled via front panel or with a laptop or computer. This test equipment can be easily integrated into Teseq, EM Test, and Milmega product setups. It is designed to ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output. The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.

This EMC test equipment is powered from a high efficiency power supply with a high power factor and wide range of voltage operations.The unit is air-cooled with integral fans, is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. 

Our amplifiers provide turnkey solutions coming with required cords and accessories. The front panel display provides immediate results and allows for quick modification of testing parameters. It also provides operational status and heatsink temperature. To supplement testing requirements we also offer a variety of other antennas and amplifiers making Transient Specialists the go-to resource for rentals.

Solid State Power Amplifier

In Stock

IFI Microwave Power Amplifier Features 

      • 800MHz-2.5Ghz 300 Watts Capabilities 
      • RF Sample Port, RF Input/Output on the Front Panel
      • Free Technical Support & 2 Days Free Transit
      • Gain Control Local & Remote, 30dB range
      • RPIB IEEE 488 & RS232 Remote Control
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The IFI S251-300 allows for up to 300W within the frequency range of 800MHz-2GHz. This solid state, rugged amplifier is designed for use for a variety of applications with communication features needed for today’s automated test systems. The durability of this system is also apparent in the variety of protection including VSWR, over-current, voltage protection, and airflow sensors for the module and the system level.

This EMC (electromagnetic comparability) test equipment allows for easy integration with preexisting testing systems. It is often included in test setups with associated Teseq and IFI products including the NSG 4070 and ITS 6006. Reverse and forward power as well as, diagnostic information can be seen immediate through the front panel screen. 

Our Amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including the AS0860-50 (800Mhz-6Ghz 50W) and CBA 1G-600B (80MHz-2Ghz 600W).

Options:
  • 1 Week Rental $1,760.00
  • 2 Week Rental $2,640.00
  • 1 Month Rental $3,520.00