EM Test Equipment Rental

Rent EM Test equipment designed for a variety of commercial and automotive testing requirements. Our inventory of ISO 17025 calibrated equipment includes capabilities for transient immunity on power lines up to 100 Amps.

Related:
Showing 1 - 16 of 50 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EM Test Dito Side Front Logo EM Test Dito Front Screen
EM Test Dito - Rent & Buy 16 kV ESD Simulator
  • 16 kV Air & 10 kV Contact Discharge (10 V Steps)
  • Light Weight Ergonomic Design
  • 150 pF/ 330 Ohm Network Installed
Monthly Rental-$295
Choose options
In Stock
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-300-32 - Rent Transient System 32 Amp CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/32 A AC or DC
  • Laptop with iec.control software included
EM Test Compact NX7 Front Side EM Test Compact NX7 Front
EM Test Compact NX7 - Rent 7 kV Compact Transient Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
In Stock
EM Test UCS 200N50 - Front Side EM Test UCS 200N50 - Front
EM Test UCS 200N50 - Rent Microburst Generator 50 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 50 Amps
In Stock
EM Test LD 200N - Front Side EM Test LD 200N - Front
EM Test LD 200N - Rent Load Dump Generator
  • Generators Clipped Load Dump Pulses
  • Tests to ISO 7637-2 & ISO 16750-2 Load Dump
  • Built-in CDN Max 80 Volts 30 Amps
In Stock
EM Test NX5 bsp-1-300-16 Front Side EM Test NX5 bsp-1-300-16 Front
EM Test NX5 bsp-1-300-16 - Rent 5 kV Surge & EFT Generator
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
Monthly Rental-$1,550
In Stock
EM Test UCS 200N100.2 - Front Side EM Test UCS 200N100.2 - Front
EM Test UCS 200N100.2 - Rent Transient Generator 100 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 100 Amps
EM Test PFM 200N100 - Rent Automotive Power Fail Simulator EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
  • Switch for Power Lines 100 A and Data Lines 2 A
  • Fast Switch with Rise/Fall Times of 200ns
  • Pulses E10 and E13 of the LV 124/LV 148
In Stock
EM Test ACC front side EM Test ACC - Side
EM Test ACC - Rent Automotive Capacitive Coupling Clamp
  • ISO 7637-3 & OEM Compliant Solution
  • Accepts Cables up to 40mm Diameter
  • Solution for Testing Shielded Signal Lines
In Stock
EM Test CA EFT Kit - Attenuators EM Test CA EFT Kit - Case & Accessories
EM Test CA EFT Kit - Rent EFT/Burst Pulse Verification Kit
  • Calibration Kit Designed for EM Test Systems
  • Compliant to IEC 61000-4-4 & ISO 7637, Annex D
  • Includes KW 50 (50Ω) & KW1000 (1kΩ)
EM Test EM 101 - Front Side Open EM Test EM 101 - Side Open
EM Test EM 101 - Rent (Lüthi) RF Clamp 150 kHz - 1 GHz
  • Frequency Range 150 kHz to 1 GHz
  • Includes Calibration Adapters and Accessories
  • 150 kHz - 230 MHz 100 Watts Maximum
In Stock
EM Test CA ISO Load Resistor device for pulse verification
EM Test CA ISO - Rent Resistor Kit for Load Dump Verification
  • Includes all Required Load Resistor Values
  • Resistors with very low inductance
  • Highly accurate resistors (+/-1%)
EM Test CNV 504N1.3 - Front Side EM Test CNV 504N1.3 - Front
EM Test CNV 504N1.3 - Rent Unsymmetrical Unshielded CDN
  • CDN for 4 Unshielded Unsymmetrical Lines
  • Coupler for Surge & Ringwave Transients
  • Maximum Impulse Voltage 4 kV
In Stock
EM Test CDN M2/3 - Front Side EM Test CDN M2/3 - Side
EM Test CDN M2/3 - Rent CDN for 2/3 Supply Lines
  • Frequency 150 kHz - 300 MHz
  • Max 250 Volts 16 Amps AC/DC
  • Designed for 2 or 3 Supply Lines
In Stock
EM Test CDN M5-32A - Front Side EM Test CDN M5-32A - Side
EM Test CDN M5-32A - Rent RF CDN 3-Phase 32A 400VAC
  • Frequency 150 kHz - 230 MHz
  • Max 400 Volts 32 Amps AC
  • Designed for 5 AC Supply Lines
In Stock
EM Test CA LV 124 - Front in case EM Test CA LV 124 - Front Side in case
EM Test CA LV 124 - Rent LV 124 Verification Kit for PFM 200N100
  • 10 Ohm & 100 Ohm Power Calibration Loads
  • 1 Ohm & 1000 Ohm Data Line Calibration Loads
  • Designed for up to 48 Volt Battery Lines
In Stock