EN 50370 Rentals - Machine Tools Products EMC Equipment

Showing 1 to 9 of 18 products

RENTAL

In Stock

Conducted Immunity Generator Features 

      • 6.6kV Surge & 100kHz Ring Wave, EFT 4.8kV
      • Laptop & ISO 17025 Calibration included
      • CDNs - Single/Three phase up to 620V/100A
      • Free Technical Support & 2 Days Free Transit
      • Touch Panel Screen, Easy to use Architecture 
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration and two free days of transit time is included in the rental equipment priceIt includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer the full line of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

Conducted Immunity Generator Features 

      • 4.4kV Surge & 4.4kV EFT/Burst
      • ISO 17025 Calibration included
      • Both IEC and ANSI coupling methods
      • Free Technical Support & 2 Days Free Transit
      • Touch Panel Screen, Easy to use Architecture 
      • Many CDN's & Accessories Available
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq NSG 3040 electromagnetic immunity (EMI) test generator provides 4.4kV Surge and 4.4kV electrical fast transient (EFT) with a built-in single phase coupler and is designed primarily for cable-borne transient interference tests. A2LA accredited calibration is included in the EMC rental equipment price. This Teseq products modular architecture and industry standard interfaces allow it to be easily expanded and customized to meet individual testing needs.

This Immunity Test Generator is designed to fulfill conducted EMC testing requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). The NSG3040 includes a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This EMC test equipment can also be controlled via PC through the Ethernet Port.

This Teseq (previously known as Schaffner) surge/immunity generator is an all in one box that tests to EN/IEC 61000-4-4, EN/IEC 61000-4-5 and EN/IEC 61000-4-11 and CE Mark with optional INA 6502. Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests. This pulse generator, similar to the NSG 3060, provides the same easy to use interface and connection methods.

RENTAL

In Stock

Conducted Immunity Generator Features 

      • 7kV Surge &  6kV 100kHz Ring Wave, EFT 5.5kV
      • ISO 17025 Calibration & Software Included
      • Built-in single Phase coupler/decoupler 300V/16A
      • Free Technical Support & 2 Days Free Transit
      • External variac control 0-10Vdc & Fail inputs
      • Manual operation from front panel & Remote
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A. 

This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.

The UCS500n7 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, ANSI/IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. 

RENTAL

IFI CW Traveling Wave Tube Features

      • Solid State Power Supply & Rugged Construction
      • 7.5GHz-18GHz 250 Watts Capabilites
      • Instantaneous Broadband Frequency Range
      • Free Technical Support & 2 Days Free Transit
      • High Frequency, High-power Microwave Testing
      • RS-232 & IEEE-488 Interface Included
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The IFI T188-250 Amplifier which can produce 250W in the 7.5GHz to 18GHz frequency range. These are "state of the art" and have field proven reliability and unsurpassed performance as the best in the industry. This test system makes an excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.

This test equipment has a backlit LCD display allowing for easy modification of testing parameters. This screen shows forward/reverse power indication, system status, and self-diagnostic information. The selection switches on the right of the front panel allow the user to easily select the desired mode if not being controlled via laptop. 

This solid state power supply is designed to meet a wide variety of standards including MIL-STD-461 RS103, ISO 11452, and DO 160 sec20. This IFI product is easily integrated into a preexisting setup often and reliable rugged construction lends itself well to any testing environment. This amplifier comes with all required cords and testing accessories arriving at test location ready for testing to begin. 

RENTAL

In Stock

Conducted Immunity Generator Features 

      • 6kV Surge, 4.4kV EFT, 6kV Ringwave, & Dips
      • Upgraded Units & ISO 17025 Calibrations
      • Single Phase - 250v/16a AC & 100v/10a DC
      • Free Technical Support & 2 Days Free Transit
      • 10x700 Telecom Wave available upon Request 
      • Front Current & Voltage Attenuated Monitoring Ports 
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Pro Plus made by Thermo Fisher Scientific is a Conducted Immunity Generator designed for 6kV surge/combination wave, 4.4kV EFT/Burst, 100kHz ringwave at 6kV, and dips testing.This test system provides a single unit solution for surge, EFT, ringwave, and dips and interruptions and is upgraded to meet the latest versions of these standards. This test equipment comes with an A2LA ISO 17025 accredited calibration and free technical support. We also offer rentals of the 10x700 Telecom wave board providing capabilities with the EMC Pro Plus platform.

This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. It also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMC Pro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMC Pro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

RENTAL

In Stock

Conducted Immunity Generator Features

      • 6kV Surge,  5kV EFT/Burst, & 7kV Ringwave & Optional Dips
      • ISO 17025 Calibration & 2 Days Free Transit
      • Built In 264v/16A AC 220V/10A DC Single Phase Coupler
      • Voltage and Current Monitoring - Front of Unit
      • Easy to Operate, Manual & Automated Test Modes
      • Front Panel Attenuated Voltage & Current Monitoring 
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Haefely Hipotronics Axos8 conducted immunity test generator allow for 6kV surge/combination wave testing, 5kV EFT/Burst, and a 7kV Ringwave (optional Dips and Interrupts are availible) and a built-in single phase coupler. This test systems is the higher voltage version of the Axos 5, including a Ringwave Function. Both Axos units have front panel monitoring ports with built in attenuation allowing for quick ability to verify waveform. Take advantage of pro-rated daily rates after the first month and quick delivery!

This Immunity Test Generator expandable functionality allows for quick and completely automated testing to the most common IEC, EN, ANSI, IEEE and UL standards. This test equipment is user friendly with manual and automated test mode and software assisted test preparation. It provides a touch screen for  efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

This pulse generator allows for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12 and optional external box for testing per EN/IEC 61000-4-11 and EN IEC 61000-4-29. The Axos unit can either be operated via front panel by large colour graphic interface or remotely from the PC. This product has the ability to change testing parameters while conducting tests and is useful for monitoring and debugging function during design phase as well as compliance and pre-compliance testing.