Showing 1 - 12 of 12 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Teseq NSG 3060 Front Side Teseq NSG 3060 Front
Teseq NSG 3060 - Teseq 6.6 kV Transient Test System
  • 6.6 kV Surge, 4.8 kV EFT, & 6.6 kV 100 kHz Ringwave
  • External Single Phase CDN Max 270 V/16 A AC or DC
  • Laptop with WIN 3000 Software Included
Buy Used-$21,000
In Stock
Teseq CDN 3063 - Front Side Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
Teseq CDN 3063 - Rent 3-Phase 480 Volt 32 Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Maximum 480 Volts 32 Amps AC/DC
  • Automatic Coupler for NSG 3060/NSG 3040
Buy Used-$11,000
In Stock
Teseq CDN 3083-S100 - Front Side Teseq CDN 3083-S100 - Side Above
Teseq CDN 3083-S100 - Rent 3-Phase 100 Amp Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 620 V DC
  • Manual Coupler for NSG 3060 or NSG 3040
Buy Used-$17,000
In Stock
EM Test LD 200N - Front Side EM Test LD 200N - Front
EM Test LD 200N - Rent Load Dump Generator
  • Generators Clipped Load Dump Pulses
  • Tests to ISO 7637-2 & ISO 16750-2 Load Dump
  • Built-in CDN Max 80 Volts 30 Amps
In Stock
EM Test VDS200N - Side EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 15 Amps
  • Voltage Drop Simulator with Low Output Impedance
EM Test VDS 200N30 - Front Side EM Test VDS 200N30 - Front
EM Test VDS 200N30 - Rent 30 Amp Voltage Drop Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 30 Amps
  • Voltage Drop Simulator with Low Output Impedance
EMC Partner MIG-OS-OS1 & CDN 2000-06-25 - Side EMC Partner MIG-OS-OS1 & CDN 2000-06-25 - Front
EMC Partner MIG-OS-OS1 - Rent Damped Oscillatory Test System
  • 100 kHz & 1 MHz 3 kV DOW Generator
  • Includes EMC Partner CDN 2000-06-25
  • Maximum 480 Volts 25 Amps AC
ECAT EP62 - Front ECAT EP62 - Side
Thermo Keytek ECAT EP62 - Rent & Buy IEC 61000-4-11 Module
  • Maximum 240 Volt & 32 Amps
  • Designed for IEC 61000-4-11 Testing
  • Must be used with E103 Control Unit
$8,000
In Stock
ECAT E508 - Front ECAT E508 - Side
Thermo Keytek ECAT E508 - Rent 10 x 360 µs Telecom Surge Module
  • 10x360µs Waveform Generator
  • Provides 50 Volts to 1100 Volt Levels
  • Test Solution GR-1089-CORE
Buy Used-$5,000
In Stock
Thermo Fisher Scientific Keytek ECAT E506-4W Module Front Thermo Fisher Scientific Keytek ECAT E506-4W Module Side
Thermo Keytek ECAT E506-4W - Rent Bellcore 2x10 µs Surge Module
  • 2 x 10 µs Waveform Generator
  • Provides up to 5kV 500 Amps
  • Must be used with E103 Control Unit
$4,000
In Stock
ECAT E411 Thermo Fisher / Keytek Front ECAT E411 Thermo Fisher / Keytek Side with glass cover
Thermo Keytek ECAT E411 - Buy & Rent 4.4 kV EFT/Burst Module
  • 4.4 kV EFT/Burst Generator Module
  • Designed for IEC 61000-4-4 Testing
  • Must be used with E103 Control Unit
Buy Used-$4,000
In Stock
Thermo Keytek ECAT E103 - Rent ECAT Control Center Thermo Keytek ECAT E103 - Rent ECAT Control Center
Thermo Keytek ECAT E103 - Rent ECAT Control Center
  • Required to use ECAT Modules 
  • Firmware Updates Provided Upon Request
  • Additional Sections can be Added
In Stock