Rent 7 kV Transient Immunity Test Systems
4kV Surge Transients
Surge & EFT Coupling
HV Surge System
Combination Wave Transients
Power Mains CDN
Coupling Decoupling Equipment
Electrical Fast Transients
EFT/Burst Immunity
Test Accessory Rental
EMI Equipment
- 7 kV Surge, Ringwave, Telecom Surge, & 5.5 kV EFT
- Built-in single phase CDN Max 400 V/32 A AC or DC
- 400 Volt Model: bsprt-1-400-32
- 6.6 kV Surge, 4.8 kV EFT, & 6.6 kV 100 kHz Ringwave
- External Single Phase CDN Max 270 V/16 A AC or DC
- Laptop with WIN 3000 Software Included
- 6 kV Surge, 4.4 kV EFT, & 6 kV 100 kHz Ringwave
- Built-in CDN Max 250 V/16 A AC or 100 V/10 A DC
- Capabilities for Voltage Dips Testing
- 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
- Built-in CDN Max 264 V/16 A AC or 220 V/10 A DC
- Compliant to ANSI Coupling Requirements
- Configured for 6.6 kV Surge & 5.5 kV EFT/Burst
- Built-in single phase CDN Max 300 V/16 A AC or DC
- Model: NSG 3060A-IEC (IEC 61000-4-4/5)
- 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
- Built-in single phase CDN Max 300 V/16 A AC or DC
- Laptop with iec.control software included
- 15 kV/ 7.5 kA Surge Generator
- External CDN 3153-S63 Included
- Compliant to IEC 61000-4-5
- 10 kV Combination Wave Surge Module
- IEC 61000-4-5 & ANSI C62.41 Compliant
- Must be Used with ECAT E103 Controller
Overview
General Testing Information
Surge testing requires to a variety of different voltage levels depending upon the application and the associated standard. This ~5-6kV systems offer solutions to a variety of higher voltage requirements. As with all surge testing, having the correct coupling capabilities is crucial. Depending upon the generator and testing needs, often times the coupling decoupling network requires communication with the generator and is considered automatic. This is only a consideration if placement of the surge on the usually sine wave is required. Most systems at this higher level, offer both surge, EFT/Burst, ringwave pulse capabilities ideal for a variety of conducted immunity requirements.
Common Equipment
- Transient Generator
- Reference Plane
- Coupling Decoupling Network (CDN)
- Oscilloscope
- Differential Probes
- Associated Cords and Cables
Typical Table Top Setup (TRA3000)
