Testing solutions for current operated circuit-breakers - Teseq, EM Test, & Haefely  
Testing solutions for current operated circuit-breakers - Teseq, EM Test, & Haefely  
IEC 61009-1 applies to residual current operated circuit-breakers for over current protection for household and similar installations is in its third 2010 edition. It applies for voltage not above 440V A.C. with frequency of 50Hz, 60Hz, or 50/60Hz and rated currents not exceeding 125A. Also, rated short circuit capabilities not exceeding 25kA for operation at 50Hz or 60Hz. Major technical changes to amendment 2 (2006) version include, complete revision of EMC sequences, including the new test T.2.6, already approved in IEC 61543; clarification of RCDs current/time characteristics reported in Tables 2 and 3; and others. A notable change is the movement for some alignment with IEC 60898-1. The intention of these devices is to provide protection against indirect contact, the exposed conductive parts of the installation being connected to an appropriate earth electrode and to protect against overcurrents the wiring installations of buildings and similar applications. Part 1 of this standard is considered the "General Rules" of testing, IEC 61009-2 applies to the general rules to the general rules to RCBO's functionally dependent on line voltage.

IEC 61009-1 - Residual Current Circuit-Breakers EMC Test Equipment

Showing 1 to 9 of 10 products

RENTAL

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer a variety of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

The EMC Pro Plus made by Thermo Fisher Scientific is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.

This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. It also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMC Pro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMC Pro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

RENTAL

The Haefely Hipotronics Axos8 EMI surge generator to 7 kV Ringwave and Surge generator with 5kV EFT (optional Dips and Interrupts) and a built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This expandable Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator expandable functionality allows for quick and completely automated testing to the most common IEC, EN, ANSI, IEEE and UL standards. This test equipment is user friendly with manual and automated test mode and software assisted test preparation. It provides a touch screen for  efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

This pulse generator allows for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12 and optional external box for testing per EN/IEC 61000-4-11 and EN IEC 61000-4-29. The Axos unit can either be operated via front panel by large colour graphic interface or remotely from the PC. This product has the ability to change testing parameters while conducting tests and is useful for monitoring and debugging function during design phase as well as compliance and pre-compliance testing.

RENTAL

The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A. 

This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.

The UCS500n7 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, ANSI/IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. 

RENTAL

The Teseq CDN 3063 EMC Immunity Tester with the NSG 3060 for EFT to 4.8kV, Surge to 6.6kV, 100 kHz Ringwave to 6.6kV.  It Includes, three phase EFT and Surge coupler with 480V, 32A EUT capability. This is the combination of both the CDN 3063 and NSG 3060 which are priced and often rented desperately. This product is designed primarily for cable-borne transient interference tests.

This Immunity Testing System was created for maximum reliability in a wide range of test setups. Over temperature protection, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components. The combination of both the NSG 3060 and CDN 3063 takes into account EUT power voltage levels allowing for testing to ANSI C62.41 and many others.

RENTAL

The combination of the NSG 3060 with the CDN 3061 provides the pulse capabilities for electrical fast transients 4.8kV, surge/combination wave to 6.6kV, 100kHz ringwave to 6.6kV and offers solutions for both IEC, CE mark, & ANSI testing. The NSG 3060 can be rented individually or, as in this case, with a single phase coupler. It allows coupling EFT, surge, and ringwave up to 270V/16A. An A2LA accredited calibration is included in the EMC test equipment price.

This Teseq system offers a user friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12,ANSI C62.41, C62.45, and UL 1449.  It offers a a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel.  Expansion capabilities enable the system to be configured for a much broader range of applications including 10/700 Telecom Surge and Magnetic Field tests. We also offer rentals of many accessories including the CDN 3083 series to facilitate additional testing capabilities.  

Dips and Interrupts available per IEC 61000-4-11 with optional INA 6502. The automated single-phase coupling network incorporates surge and burst coupling for continuous EUT currents of up to 16 A and complies to the requirements for the surge standard IEC/EN 61000-4-5, as well the coupling modes given in the ANSI C62.45 standard and for burst standard IEC/EN 61000-4-4.

RENTAL

The Teseq CDN 3083-S100 is an external, manual, three phase, 620v, 100a coupler/decoupler for the combination wave/surge and 100kHz ringwave generated by the NSG3060 and NSG 3040. This Teseq Product enables coupling modes with all types of symmetrical and asymmetrical coupling given in the EN/IEC 61000-4-5 and ANSI C62.41 2002.

This coupling decoupling network comes assembled and on wheels, providing an easily maneuverable turnkey solution. An A2LA accredited calibration is included in the price of this test equipment. It is often used in conjunction with the CDN3083-B100 providing 100Amp coupling/decoupling for Burst/EFT (electrical fast transients). These products are ideal for applications that require high AC and DC voltages and currents.

The CDN30830-S100 has all components, surge decoupling networks, INA 3080s, INA 3084 and earth rails installed. This testing accessory also comes with several cables allowing for required connections to be made easily. It can be rented individually to supplement existing testing capabilities, must be used with NSG 3060 or NSG 3040, or in combination with either Teseq surge generator.

RENTAL

The CDN 3083-B100 is a manual, external three phase, 690V, 100A coupler/decoupler for the EFT/Burst generated by the NSG 3060, NSG 3040, or similar Teseq product. A2LA accredited calibration is included in the EMC testing accessory price. This product can has a maximum burst voltage of 8800 volts.

This ideal for industries and applications that require higher AC and DC voltages and currents, including power & telecom industry, renewable energy applications, electric vehicle and charging stations. Given that this accessories weighs roughly 11lbs, it allows placement of the coupling decoupling network to distances between it and EUT as required by the standard.

The CDN 3083 - B100 is designed for testing of electrical fast transients, specifically EN/IEC 61000-4-4. This testing accessory is often rented in conjunction with the CDN 3083-S100 for surge and ringwave. It is designed to be used with an EUT supply in AC mode up to 690V.

RENTAL

The Teseq CDN 3063 coupling decoupling network allows for 32Amp 480Volt three phase, EFT, Surge, and 100kHz ringwave for use with the NSG 3040 and NSG 3060. This testing accessory can be rented individually or together as an NSG3060 CDN3063 combination. This accessory is designed for maximum reliability in a wide range of test setups. 

This immunity test equipment includes both IEC and ANSI coupling methods. It also includes a Phase Rotation indicator ensuring correctly sequenced power connection, preventing damage to equipment under test (EUT). An A2LA accredited calibration is included in the EMC test equipment price.

The CDN3063 allows for coupling for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI C62.41, ANSI C62.45, and UL 1449. Through new technology it offers the ANSI C62.41 coupling method, used to measure and track the mains voltage and simultaneously control the pulse phase angle. We also offer rentals of higher current and voltage networks including the CDN3083-S100 and CDN3083-B100. 

Showing 1 to 9 of 10 products