Showing 1 - 16 of 52 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EM Test RCB 200N1 - Front Side EM Test RCB 200N1 - Front
EM Test RCB 200N1 - Rent FMC1278 Transient Generator
  • Compliant Pulses to FMC1278 & EMC-CS-2009.1 
  • Pulses CI 220: A1, A2-1, A2-2, C-1 and C-2
  • Pulses RI 130: A2-1, A2-2 with Coupling Test Fixture
In Stock
Teseq NSG 437-Auto Front Side Simulator Teseq NSG 437-Auto - 30 kV Automotive ESD Simulator
Teseq NSG 437-Auto - 30 kV Automotive ESD Simulator
  • 30V Air & Contact Discharge (100V Steps)
  • Color Touch Panel Control with Activity Log
  • Auto Variation Includes 3 Automotive Networks
In Stock
Teseq Automotive Conducted Immunity Test System - Front Side Teseq Automotive Conducted Immunity Test System - Front Forward
Teseq ISO 7637-2/-3 Test System - Rent Immunity Test Package
  • Includes NSG 5500, PA 5840, & CDN 400
  • ISO 7637-2 & ISO 7637-3 Tests
  • Battery Simulators up to 60 V 100 A
EM Test VDS 200N30 - Front Side EM Test VDS 200N30 - Front
EM Test VDS 200N30 - Rent 30 Amp Voltage Drop Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 30 Amps
  • Voltage Drop Simulator with Low Output Impedance
PA 5840 - Front PA 5840 - Back
Teseq PA 5840-300 - Rent 100Amp Automotive Battery Simulator
  • -15 to +60 Volts 100 Amps Continuous
  • High Bandwidth up to 150 kHz
  • 300 Amp Inrush Current Capability
In Stock
Teseq NSG 438-Auto Simulator & Networks Teseq NSG 438-Auto Simulator Screen
Teseq NSG 438-Auto - 30 kV Battery Powered Auto Simulator
  • 30 kV Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Auto Variation Includes 3 Automotive Networks
In Stock
Teseq NSG 4070C Front Side Teseq NSG 4070C Front
Teseq NSG 4070C - Rent Conducted RF Immunity Test System
  • Built-in 80 Watts 150 kHz to 230 MHz Amplifier 
  • 1 GHz Signal Generator & 3 Power Meter Inputs
  • Preprogrammed Test Routines/Sequences
In Stock
Teseq NSG 5500 Front Side Teseq NSG 5500 Front
Teseq NSG 5500 - Rent Automotive Transient Test Generator
  • Test System for ISO 7637-2/3 Requirements
  • Battery Simulators Available up to 100 Amps
  • Pre-programmed International & OEM Tests
In Stock
Teseq NSG 438A-Auto Simulator and Networks Teseq NSG 438A-Auto Simulator Display
Teseq NSG 438A-Auto - 30kV ESD Simulator w/ Charge Removal
  • 30 kV Air & Contact Discharge (100V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Charge Removal Feature Capabilities
In Stock
Teseq PA 5840-75 25 Amps - Front Side Teseq PA 5840-75 25 Amps - Front
Teseq PA 5840-75 - Rent 25 Amp Battery Simulator
  • -15 to +60 Volts 25 Amps Continuous
  • High Bandwidth up to 150 kHz
  • 75 Amps Inrush Current Capability
EM Test LD 200N - Front Side EM Test LD 200N - Front
EM Test LD 200N - Rent Load Dump Generator
  • Generators Clipped Load Dump Pulses
  • Tests to ISO 7637-2 & ISO 16750-2 Load Dump
  • Built-in CDN Max 80 Volts 30 Amps
In Stock
Teseq/EM Test Automotive ISO 10605 Test Networks Teseq/EM Test Automotive ISO 10605 Test Networks
Teseq/EM Test Automotive ISO 10605 Test Networks
  • Teseq/EM Test Automotive ESD Network Set
  • Includes INA 4381, INA 4382, & INA 4553
EM Test VDS 200N15 - Front Side EM Test VDS 200N15 - Front
EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 15 Amps
  • Voltage Drop Simulator with Low Output Impedance
EM Test VDS 200Q50.2 - Front Side EM Test VDS 200Q50.2 - Front
EM Test VDS 200Q50.2 - Rent 50 Amp Battery Simulator
  • -60 to +60 Volts 50 Amps Continuous
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Extended Range 80 Volts 40 Amps
EM Test UCS 200N100.2 - Front Side EM Test UCS 200N100.2 - Front
EM Test UCS 200N100.2 - Rent Transient Generator 100 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 100 Amps
EM Test AutoWave - Front Side EM Test AutoWave - Front
EM Test AutoWave - Rent 2 Channel Waveform Generator
  • 2-channel Arbitrary Waveform Generator
  • Dual-Processor-Technology, 500kS/s sample rate
  • Library of Standard Test Routines