Solar Electronics EMI Test Equipment Rentals | EMC Test Equipment
Showing 1 to 9 of 11 products
The 9354-2 by Solar Electronics is a specially designed military EMC transient generator to provide the necessary pulses required for testing to several military standards. A2LA accredited calibration is included in the EMC rental equipment price. The Solar 9354-2 includes a panel-mounted digital voltmeter that monitors the adjusted open circuit discharge voltage.
This Military EMC Test Equipment provide nine selectable waveforms, including six damped sinusoidal pulses (10 kHz, 100 kHz, 1 MHz, 10 MHz, 30 MHz, and 100 MHz) and three double exponential pulses (6.4 µS, 70 µS, 500 µS). The 9354-2 goes beyond the more basic 9354-1 and also has the capability for three double exponential pulses (6.4 µS, 70 µS, and 120 µS). Auto pulsing of the sinusoidal repetition rate is internally adjusted from 0.5 to 1.0 pulse per second.
The 9354-2 is a versatile Immunity test generator allowing for testing to MIL-STD-461 CS116 and RTCA DO-160 sec 22. A front panel-mounted push button can be used to manually trigger single pulses. The peak amplitude of the selected output pulse is adjustable as a percentage of the charge voltage. Our EMC rental equipment includes the option of renting the accessory Bulk Current Injection Clamp (BCI) and other accessories required for CS116.
The Solar Electronics 9355 Pulse generator (2x35 nanoseconds) is designed to provide impulse excitation by means of an injection probe placed around interconnecting cables or power wires. A2LA accredited calibration is included in the EMC rental equipment price. This product provides adjustable pulse rate from 0.6 pulse per second to 150 pulse per second, and manual triggering.
This Military / Avionics Test Equipment allows for charged line potential to be adjusted from less than 10 V to approximately 2,000 V. The 9355 uses a charged transmission line (50 Ω) to generate a pulse with less than 2 nS rise and fall time, and duration of approximately 30 nS, calibrated in a 50 Ω fixture to deliver up to 5 A at a rate of 30 pulse per second for one minute. The repetition rate is variable from less than 0.6 pulse per second to greater than 150 pulse per second, or single pulses manually triggered via panel mounted button.
The Solar 9355 is an EMI test solution for testing to MIL-STD-461D CS115. This product has a digital display for monitor the charging voltage and pulse repetition rate. Our EMC rental equipment includes the option of renting the accessory Bulk Current Injection Clamp (BCI) and other accessories required for CS115.
The 2854 Solar spike generator for conducted transient susceptibility provides 5 μS ±22% pulse with a 1.5 μS ± 0.5 μS rise time across a 5.0 Ω non-inductive resistor. Our military immunity test rental includes an A2LA accredited calibration included in the EMC rental equipment price. The 2854 provides transient pulse (spike) with adjustable amplitude up to 600V.
This Military EMC Rental Test Generator straight forward, easy to use interface includes nobs allowing for manipulation of testing parameters. Two sets of output terminals allow either parallel or series injection into the power line. The series injection may be used on DC and AC lines. Parallel injection should be used on DC lines only. The output winding for the Solar 2854 used for series injection can carry 25 A of power current.
The 2854 was designed to test to MIL-STD-461 CS106 meeting all requirements from this military standard. With the diverse range of testing capabilities this Solar Electronics product has the potential to test to many other RFI/EMI specifications.
The Solar 7054 is 600V spike generator delivering over 300 kW into low resistance loads with adjustable amplitude and the repetition rate. Our EMI test equipment rentals come with A2LA calibration & technical support. The transient shape approximates the curve given in Figure 19 of MIL-STD-462 with less than or equal to 2.0 µS rise time and approximately 10 µS fall time.
This Military EMC Immunity Test Generator has a source impedance less than 0.5 Ω. Two sets of output terminals allow either parallel or series injection into the power line. The output winding used for series injection can carry 25 A of power current. The output terminals are isolated from the chassis and the power cord.
The 7054 allows testing for method MIL-STD-461 CS06 and RTCA DO-160 Section 17 as well various missile specifications and other requirements. On 50, 60 or 400 Hz power lines the transient can be applied in a periodic manner to the negative or the positive half-cycle of the power frequency. This military rental includes output terminals for series or parallel injection.
The 8282 by Solar Electronics spike generator up to 600v for conducted transient susceptibility testing providing three different spike duration's 0.15 µS, 5.0 µS, and 10.0 µS into low source impedance. Our military immunity test rental includes an A2LA accredited calibration included in the EMC rental equipment price.
This Military EMC Rental Test Generator this product has two sets of output terminals allow either parallel or series injection into the power line. Series injection is used on AC lines. Parallel injection is used on DC lines. The output winding used for series injection can carry 25 A of power current. The output terminals are isolated from the chassis and the power cord.
The Solar 8282 is designed to meet MIL-STD-461 CS06 (NEMA TS2) provides all the waveshapes required by MIL-STD-461 and many other military EMI specifications. All functions are selected by push buttons which are lighted when activated. This product is not designed to test for RTCA/DO-160G Section 17 or MIL-STD-461F CS106.
The Solar 8850 by Solar Electronics is a power sweep generator with 7021-1 phase shift network for Mil Std 461 CS01/CS101. A2LA accredited calibration is included in the EMC rental equipment price. This product is ideal for conducted susceptibility testing providing increased audio voltage from a low impedance source.
This Military EMC Test Equipment is designed to be used with an audio isolation transformer allowing the injection injection of sinewave audio voltages into power lines supplying the EUT. The Solar 8850 offers the option for both manually tuned or sweeping mode for four frequency bands 20Hz to 150Khz. The digital display on this EMC test equipment shows frequency and output voltage level(injection voltage level).
The Solar 8850 also provides automatic leveling of output voltage as frequency is scanned or swept. This product is designed to meet the testing critera for MIL-STD-461 CS101 and MIL-STD-461 CS01. The maximum output of this test equipment is 300 watts for 1.5 ohm resistive load and 200 watts for a 2.5 ohm. As added protection this Solar military product provides protective circuits preventing damage caused by power frequency feedback in typical a.c. setups.
Mil Std 461 CS116 Accessory Package - Solar 9335-2, Solar 9123-1 Injection Probes, Calibration Fixtures, attenuators and monitoring probe
The Solar CS116 accessory package is a complete accessory package for CS115 and CS116 testing with the Solar Electronics 9354-2 including calibration fixtures and attenuators. High power transient generators with source impedances from 0.25 Ω to 50 Ω can use this probe to deliver high peak voltage or high current pulses into the wires or cables passing through the window of the device.
The unique winding arrangement of this impedance matching probe provides step-up or step-down ratios with respect to either: 1) the source impedance of the connected generator, when used for injection, or 2) the load impedance of the connected receiver, when used for reception. This results in maximum power transfer into or out of the transformer winding formed by the cable bundle passing through the window.
The 6220-4 / Solar6220-1B by Solar Electronics audio isolation transformer allows testing for DO-160 Sec 18,sec 20. The transformer is capable of handing up to 200 W of audio power into its primary over the frequency range 30 Hz to 250 kHz. The turns ratio provides a two-to-one step down to the special secondary winding. The secondary will handle up to 50 A of AC or DC without saturating the transformer.
Another secondary winding is connected to a pair of binding posts suitable for connecting to AC voltmeter as directed by the applicable EMI specifications.The transformer may be used as a 4 Ω primary and 1 Ω secondary or 2.4 Ω primary and 0.6 Ω secondary or 2 Ω primary and 0.5 Ω secondary.
|The Solar7032 is an electronics power line isolation transformer for MIL STD 461 CS06 and MIL-STD 1399. This transformer is equipped with a wall plug and 2 binding posts. Rated at 800 W, 50-60 Hz.|