ISO 7637-3 Equipment Rental

Get fast delivery of test equipment designed for ICC and ACC test methods of ISO 7637-3 for testing data lines. Our solutions for the inductive coupling clamp method include solutions from both Teseq and EM Test including the impedance matching transformer used in verification.

Showing 1 - 9 of 9 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.

    •  

    FAQ
    EM Test MN-CIP9136 & CIP 9136A EM Test MN-CIP9136 & CIP 9136A v2
    EM Test ISO 7637-3 ICC Method - Rental Transient Injection Kit
    • Teseq ISO 7637-3 ICC for UCS 200N Series
    • Used for Injection of Pulse 2A
    • Includes CIP 9136A, PCJ 9201, & MN-CIP9136
    EM Test ACC front side EM Test ACC - Side
    EM Test ACC - Rent Automotive Capacitive Coupling Clamp
    • ISO 7637-3 & OEM Compliant Solution
    • Accepts Cables up to 40mm Diameter
    • Solution for Testing Shielded Signal Lines
    In Stock
    Teseq CDN 500 Front Side Teseq CDN 500 Side
    Teseq CDN 500 - Rent ISO 7637-3 Capacitive Coupling Clamp
    • Compliant for ISO 7637-3 Testing
    • Length of Clamp 1000 mm
    • 50 Ohm BNC Connectors 
    Teseq ISO 7637-3 ICC Test System - Rental Transient Injection Kit Teseq ISO 7637-3 ICC Test System - Rental Transient Injection Kit
    Teseq ISO 7637-3 ICC Test System - Rental Transient Injection Kit
    • Teseq ISO 7637-3 ICC for NSG 5500 System
    • Used for Injection of Pulse 2A
    • Includes CIP 9136A, PCJ 9201, & INA 5580
    EM Test UCS 200N50 - Front Side EM Test UCS 200N50 - Front
    EM Test UCS 200N50 - Rent Microburst Generator 50 Amp CDN
    • Micropulse Generator for ISO, JASO, & SAE
    • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
    • Built-in CDN Max 80 Volts 50 Amps
    EM Test UCS 200N100.2 - Front Side EM Test UCS 200N100.2 - Front
    EM Test UCS 200N100.2 - Rent Transient Generator 100 Amp CDN
    • Micropulse Generator for ISO, JASO, & SAE
    • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
    • Built-in CDN Max 80 Volts 100 Amps
    Teseq NSG 5500 Front Side Teseq NSG 5500 Front
    Teseq NSG 5500 - Rent Automotive Transient Test Generator
    • Test System for ISO 7637-2/3 Requirements
    • Battery Simulators Available up to 100 Amps
    • Pre-programmed International & OEM Tests
    Teseq CIP 9136A Front Side Teseq CIP 9136A Front
    Teseq CIP 9136A - Rent 400 MHz Current Injection Probe
    • Frequency Range 4 kHz - 400 MHz
    • Compliant to IEC, ISO, & MIL-STD Tests
    • High power handling (up to 1 kW)
    EM Test MN-CIP 9136 - Adapter EM Test MN-CIP 9136 - Adapter & Cable
    EM Test MN-CIP 9136 - Rent Impedance Matching Network
    • Impedance Network to Achieve Pulse Requirements
    • Used with the EM Test UCS 200N Series
    • ISO 7637-3 Slow Transient Pulse 2A
    In Stock