Showing 1 - 16 of 41 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
CI EOS 1 - Front CI EOS 1 - Side
California Instruments EOS1 - Rent IEC 61000-4-11 Electronic Switch
  • Compliant for IEC 61000-4-11 Testing
  • Used with California Instruments iX Supplies
  • Designed for Voltage Dips & Interruptions 
In Stock
Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN
Coupling NX7 bsr-3-690-125.3 - 125Amp 3-Phase Surge & EFT CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 125 Amps 690 V AC or 1,000 V DC
  • Transient Generator Mounted in Rack
EM Test Compact NX7 Front Side EM Test Compact NX7 Front
EM Test Compact NX7 - Rent 7 kV Compact Transient Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
In Stock
EM Test Coupling NX7 bsr-3-480-32 - Front Side EM Test Coupling NX7 bsr-3-480-32 - Front
EM Test Coupling NX7 bsr-3-480-32 - Rent 3-Phase 32Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 480 Volts 32 Amps AC
  • Automatic Coupler for NX5/NX7 Systems
In Stock
EM Test NX5 bsp-1-300-16 Front Side EM Test NX5 bsp-1-300-16 Front
EM Test NX5 bsp-1-300-16 - Rent 5 kV Surge & EFT Generator
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
Monthly Rental-$1,550
In Stock
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-300-32 - Rent Transient System 32 Amp CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 300 V/32 A AC or DC
  • Laptop with iec.control software included
EM Test NX5 Front Side EM Test NX5 Front
EM Test NX5 bsp-1-400-16 - Rent Transient Generator 400V CDN
  • Configuration: 5 kV Surge, 5.5 kV Burst, & Power Fail
  • Built-in single phase CDN Max 400 V/16 A AC or DC
  • Laptop with iec.control software included
EM Test NX7 & 3-Phase CDN - 7kV Transient System EM Test NX7 & 3-Phase CDN - 7kV Transient System
EM Test NX7 & 3-Phase CDN - 7kV Transient System
  • 3-Phase EM Test Transient Test Platform (Coupling NX7)
  • Compliant for Surge, EFT, & Ringwave on Power 
  • Automatic Coupler 480Volt/32Amps Max EUT/DUT
In Stock
EM Test NX7 bsprt-1-400-32 - Front Side EM Test NX7 bsprt-1-400-32 - Front
EM Test NX7 bsprt-1-400-32 - Rent Telecom Transient Generator
  • 7 kV Surge, Ringwave, Telecom Surge, & 5.5 kV EFT
  • Built-in single phase CDN Max 400 V/32 A AC or DC
  • 400 Volt Model: bsprt-1-400-32
In Stock
EM Test PCD 8 B-3-690-1000-100 Front Side EM Test PCD 8 B-3-690-1000-100 Side
EM Test PCD 8 B-3-690-1000-100 - Rent 100Amp EFT/Burst CDN
  • Coupler for EFT/Burst to IEC 61000-4-4
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock
EM Test PCD 8 S-3-690-1000-100 Front Side EM Test PCD 8 S-3-690-1000-100 Side
EM Test PCD 8 S-3-690-1000-100 - Rent 100Amp Manual Surge CDN
  • Coupler for Surge to IEC 61000-4-5
  • Max 100 Amps 690 V AC or 1,000 V DC
  • Manual Coupler for NX5/NX7 Systems
In Stock
EM Test UCS 500N5E Front Side EM Test UCS 500N5E Front
EM Test UCS 500N5E - Rent 5.5 kV EFT/Burst Generator
  • Configured for 5.5 kV EFT/Burst Immunity Testing
  • Built-in CDN Max 300 V/16 A AC
  • Rent Capacitive Clamp for Data Line Testing
In Stock
EMC Partner DM1 - Front Side EMC Partner DM1 - Side
EMC Partner DM1 - Rent 150 pf/ 330 ‎Ohm Discharge Module
  • 16 kV Air & 10 kV Contact Discharge
  • 150 pF/ 300 Ω Discharge Module
  • Used with ESD3000 ESD Simulator
EMC Partner ESD3000 Side Front EMC Partner ESD3000 Display
EMC Partner ESD3000 - Rent 16 kV ESD Simulator/Gun
  • 16 kV Air Discharge & 10 kV Contact-discharge (100 V Steps)
  • Rechargeable Battery Powered ESD Simulator
  • Includes DM1 150pF / 330Ω Network for IEC 61000-4-2 Testing
Monthly Rental-$295
Choose options
EMC Partner IMU-MGS - Front Side EMC Partner IMU-MGS - Front
EMC Partner IMU-MGS - Rent 4 kV Surge & EFT Generator
  • 4.1 kV Surge & 4.4 kV EFT/Burst Generator 
  • Built-in CDN Max 300 Volts 16 Amps AC & DC
  • Model: IMU-MGS F4-S4-P
In Stock
EMC Partner IMU4000 - Front Side EMC Partner IMU4000 - Front
EMC Partner IMU4000 - Rent 4kV EFT, Surge, & Dips System
  • 4 kV Surge & 4.4 kV EFT/Burst Capabilities
  • CDN Max 280 V/16 A AC or 300 V/16 A DC
  • Capabilities for Voltage Dips up to 6 Amps