Showing 1 - 16 of 29 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Amplifier Research CI00402 Front Side with Software Amplifier Research CI00402 Front
Amplifier Research CI00402 - Rent 100 Watt Conducted RF System
  • 10 kHz - 400 MHz 100 Watt RF Immunity System 
  • Built-in Signal Generator & Spectrum Analyzer
  • Preprogrammed Test Routines/Sequences
Teseq CBA 400M-110 - Front side Teseq CBA 400M-110 - Front
Teseq CBA 400M-110 - Rent 110W 10 kHz - 400 MHz RF Amplifier
  • 10 kHz - 400 MHz 110 Watts Psat (min)
  • 80 Watts Power P1dB (min)
  • Class A Operation & Ethernet Control
In Stock
EM Test AN 200N100 Front Side EM Test AN 200N100 Front Top
EM Test AN 200N100 - Rent 100 Amp 5uH DC LISN
  • Max 1000 Volts 100 Amps DC (150 Amp Peak)
  • ISO 7637-2, ISO 11452-4, & CISPR 25 Compliant
  • Switch for Selecting Testing Requirements
In Stock
BCI Test Package 10 kHz - 400 MHz - Rental Injection Kit BCI Test Package 10 kHz - 400 MHz - Rental Injection Kit
BCI Test Package 10 kHz - 400 MHz - Rental Injection Kit
  • 10 kHz to 400 MHz BCI Test Kit 
  • Includes BCI Probe & Monitoring Probes
  • Designed for IEC, ISO, & MIL-STD Tests
Teseq NSG 4070C Front Side Teseq NSG 4070C Front
Teseq NSG 4070C - Rent Conducted RF Immunity Test System
  • Built-in 80 Watts 150 kHz to 230 MHz Amplifier 
  • 1 GHz Signal Generator & 3 Power Meter Inputs
  • Preprogrammed Test Routines/Sequences
In Stock
Fischer 230MHz BCI Test Package - Front Fischer 230MHz BCI Test Package - Side
230 MHz BCI Test Package - Rent IEC 61000-4-6 Injection kit
  • 10 kHz to 230 MHz BCI Test Kit 
  • Includes BCI Probe & Monitoring Probe
  • Designed for IEC 61000-4-6 Current Injection
Teseq CIP 9136A Front Side Teseq CIP 9136A Front
Teseq CIP 9136A - Rent 400 MHz Current Injection Probe
  • Frequency Range 4 kHz - 400 MHz
  • Compliant to IEC, ISO, & MIL-STD Tests
  • High power handling (up to 1 kW)
In Stock
Fischer F-120-9A Front and Label Fischer F-120-9A Side Open
Fischer F-120-9A - Rent 230 MHz Current Injection Probe
  • Frequency Range 10 kHz - 230 MHz
  • Maximum Input Power 100 Watts
  • Typically Rent as Part of 230 MHz BCI Kit
Fischer F-120-6A - Front label Fischer F-120-6A Side Open
Fischer F-120-6A - Rent 400 MHz Current Injection Probe
  • Frequency Range 10 kHz - 400 MHz
  • Maximum Input Power 200 Watts
  • Typically Rent as Part of 400 MHz BCI Kit
Teseq CBA 1G-300B - Rent 300 W 80 MHz - 1 GHz Amplifier CBA 1G-300 - Front
Teseq CBA 1G-300B - Rent 300 W 80 MHz - 1 GHz Amplifier
  • 80 MHz - 1 GHz 300 Watts Psat (min)
  • 250 Watts Power P1dB (min)
  • Class A Operation & Front Panel Display
Teseq CBA 1G-150D - Front Side Teseq CBA 1G-150D - Rent 150 W RF Amplifier 80 MHz - 1 GHz
Teseq CBA 1G-150D - Rent 150 W RF Amplifier 80 MHz - 1 GHz
  • 80 MHz - 1 GHz 150 Watts Psat (min)
  • 125 Watts Power P1dB (min)
  • Class A Operation & Front Panel Display
Buy Used-$13,000
In Stock
Keysight E4416A Single Channel Meter & Sensor Rental Keysight E4416A Single Channel Meter & Sensor Rental
Keysight E4416A Single Channel Meter & Sensor Rental
  • Single-Channel 5 MHz Video Bandwidth
  • Rented with E9300B 18GHz Average Sensor
  • Ideal for CW Power Level Verifications
In Stock
EM Test Transient Emissions Test Set - Side Front EM Test Transient Emissions Test Set - Side
Conducted Transient Emissions Set ISO 7637-2 EM Test
  • Electronic Switch, Artificial Network, & RS-Box
  • BS 200N100 Electronic switch, 60V DC/100A
  • AN 200N100 1,000V DC, 250V AC (up to 1kHz)
Teseq HV-AN 150 Front Side Teseq HV-AN 150 Front Top
Teseq HV-AN 150 - Rent 5uH 150 Amp Artificial Network
  • Max 1000 V/150 A DC or 500 V/150 A AC
  • HV Compliant to ISO 7637-4 & CISPR 25
  • Jumpers Provide LISN Path Configuration
In Stock
Schwarzbeck NNHV 8123-200 Front Side Schwarzbeck NNHV 8123-200 Front
Schwarzbeck NNHV 8123-200 - Rent 5uH 200 Amp DC LISN
  • Max 1000 V/200 A DC or 700 V/200 A AC
  • Includes HVSE 8600 Shielded Enclosure
  • 5uH LISN in Accordance with CISPR 25
Teseq CBA 400M-260 Front Side Teseq CBA 400M-260 Front Above
Teseq CBA 400M-260 - Rent 260 Watt 10 kHz - 400 MHz Amplifier
  • 10 kHz - 400 MHz 260 Watts Psat (min)
  • 210 Watts Power P1dB (min)
  • Class A Operation & Ethernet Control
In Stock