Showing 1 - 16 of 19 products
Quick Access
Return Instructions

Standard Terms

Transient Specialists, Inc. (TSI)

Standard Terms & Conditions:

  • TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  • Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  • Payment terms are net 30 with credit approval. Non-payment or late payment of amounts due will result in interest charges of 1% per month and upon demand, return of the equipment.
  • The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  • In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem.  Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  • The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  • The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  • The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  • In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  • The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  • This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
  •  

    FAQ
    Teseq HV-AN 150 Front Side Teseq HV-AN 150 Front Top
    Teseq HV-AN 150 - Rent 5uH 150 Amp Artificial Network
    • Max 1000 V/150 A DC or 500 V/150 A AC
    • HV Compliant to ISO 7637-4 & CISPR 25
    • Jumpers Provide LISN Path Configuration
    Siglent SSA3032X Plus Front Side Siglent SSA3032X Plus Front Top
    Siglent SSA3032X Plus - Rent 3.2 GHz Spectrum Analyzer
    • Frequency Range 9 kHz - 3.2 GHz
    • Resolution bandwidth (RBW) 1 Hz~1 MHz
    • Tracking Generator 100 kHz – 3.2 GHz
    In Stock
    EM Test AN 200N100 Front Side EM Test AN 200N100 Front Top
    EM Test AN 200N100 - Rent 100 Amp 5uH DC LISN
    • Max 1000 Volts 100 Amps DC (150 Amp Peak)
    • ISO 7637-2, ISO 11452-4, & CISPR 25 Compliant
    • Switch for Selecting Testing Requirements
    In Stock
    Com-Power LI-350 - Front Side Com-Power LI-350 - Front Side Above
    Com-Power LI-350 - Rent 5µH 50 Amp 400 MHz LISN
    • Frequency Range 10 kHz – 400 MHz 
    • Max 480 V/50 A AC or 676 V/35 A DC
    • Inductance 5μH & Coupling Capacitor . 0.25 µF
    EM Test Transient Emissions Test Set - Side Front EM Test Transient Emissions Test Set - Side
    Conducted Transient Emissions Set ISO 7637-2 EM Test
    • Electronic Switch, Artificial Network, & RS-Box
    • BS 200N100 Electronic switch, 60V DC/100A
    • AN 200N100 1,000V DC, 250V AC (up to 1kHz)
    In Stock
    Siglent SSA3075X-R - Front Side Siglent SSA3075X-R - Front Top
    Siglent SSA3075X-R - Rent 7.5 GHz Spectrum Analyzer
    • Frequency Range 9 kHz - 7.5 GHz
    • Resolution bandwidth (RBW): 1 Hz~3 MHz
    • Displayed Average Noise Level -165 dBm/Hz
    Fischer F-33-1 Front Side Fischer F-33-1 Side
    Fischer F-33-1 - Rent 250 MHz Current Monitoring Probe
    • Frequency 10 kHz - 250 MHz 
    • Includes FCC-MPCF-3 Calibration Fixture
    • Internal Diameter of 32 mm
    TekBox TBCP2 Front Side TekBox TBCP2 Front
    TekBox TBCP2 - Rent 750 MHz Current Monitoring Probe
    • Frequency 10 kHz - 750 MHz 
    • Includes TBCP4-750 Calibration Fixture
    • Internal Diameter of 32 mm
    In Stock
    Fischer F-33-2
    Fischer F-33-2 - Rent 250 MHz Current Monitoring Probe
    • Frequency 1 kHz - 250 MHz 
    • Includes FCC-MPCF-3 Calibration Fixture
    • Internal Diameter of 32 mm
    In Stock
    Schwarzbeck NNHV 8123-200 Front Side Schwarzbeck NNHV 8123-200 Front
    Schwarzbeck NNHV 8123-200 - Rent 5uH 200 Amp DC LISN
    • Max 1000 V/200 A DC or 700 V/200 A AC
    • Includes HVSE 8600 Shielded Enclosure
    • 5uH LISN in Accordance with CISPR 25
    Teseq SME HV-AN 150 - Front Side Teseq SME HV-AN 150 - Front Open
    Teseq SME HV-AN 150 - AN Shielded Metal Enclosure
    • Designed for use with Teseq HV-AN 150s
    • Rugged Design using Stainless Steel
    • Compliant to HV CISPR 12/25 & ISO 7637-4
    Schwarzbeck HVSE 8600 Front Side Schwarzbeck HVSE 8600 with LISNs Open
    Schwarzbeck HVSE 8600 - Automotive Shielded Enclosure
    • Designed for use with NNHV 8123-200
    • Compliant to HV CISPR 25 & BMW GS 95025-1
    • Rented with set of NNHV 8123-200 LISNs
    EM Test BS 200N100 Front Side EM Test BS 200N100 Side Top
    EM Test BS 200N100 - Electronic Switch for Voltage Transient Testing
    • Electronic Switch Accordance with ISO 7637 Part 2
    • Rented with EM Test Transient Emissions Set
    • Max 60 Volts & 100 Amps Cont. (400A @ 200ms)
    In Stock
    Teseq EXT 10uF - Front Side Teseq EXT 10uF mounted on LISN
    Teseq EXT 10uF - 10 µF capacitor for RTCA/DO-160G
    • Designed for RTCA/DO-160 Testing
    • 10uF/1000 Volt Capacitor
    • Rented with HV-AN 150 LISN
    Schwarzbeck NNLK 8129 Front Side Schwarzbeck NNLK 8129 Front
    Schwarzbeck NNLK 8129 - Rent 50uH 200 Amp LISN
    • Impedance 50 µH || 50 Ω
    • Frequency Range 150 kHz – 30 MHz
    • Maximum: 200 Amps 700 Volts AC 
    In Stock
    Siglent SSA3021X Plus - Rent 2.1 GHz Spectrum Analyzer Siglent SSA3021X Plus - Rent 2.1 GHz Spectrum Analyzer
    Siglent SSA3021X Plus - Rent 2.1 GHz Spectrum Analyzer
    • Frequency Range 9 kHz - 2.1 GHz
    • Resolution bandwidth (RBW) 1 Hz~1 MHz
    • Tracking Generator 100 kHz – 2.1 GHz
    One Month Rental-$200
    In Stock