Volvo Std 515-0003 - Load Dump Automotive EMC Test Rentals

Load Dump Pulse Generator

In Stock

Automotive Load Dump Generator Features 

      • Clipped Load Dump Generator - ISO 7637: 5a, 5b &7
      • Laptop & ISO 17025 Calibration Included
      • Selectable .5-38 Ohm Impedance (.1 Ohm Steps)
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Built in Coupler - 60volts/30amps (DUT limit)
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test LD200N provides a effective test solution to ISO 7637-2 pulses 5 and 7, as well as many other international and manufacturer based standards/requirements. This Automotive Conducted Immunity Test Solutions simulate a load dump, the sudden battery disconnection causing an over voltage impulse. This stand alone generator includes an 60v/30a DC coupling decoupling network (CDN) for direct testing and an ISO 17025 accredited calibration, providing a ideal test solution! It is designed for use with 12, 24, or 42 volt supply systems and in conjunction with other EM Test 200 series of generators.

This immunity generator is an all in one system for testing high-energy pulses as required by ISO 7637. By means of a built-in clipping circuit it also generates clipped load dump pulses as per international standards as well as manufacturer requirements. The LD200N can be integrated with the UCS200N and VDS 200N for a complete automotive immunity test system, similar to the NSG 5500.  

This test equipment allows for both pre-programmed standard test and modification of individual pulses through the FreeStyle mode. It has an adjustable source impedance from, 0.5 Ω to 38 Ω in .1 Ω steps. To facilitate a turnkey solution, we include laptop with software with this rental arriving at the testing location ready for use.

Power Amplifier/Battery Supply

In Stock

100Amp Automotive Battery Supply Features 

      • Large Inrush Current Capability - Four quadrant operation 
      • Laptop & ISO 17025 Calibration Included
      • 25 Amp & 100 Amp modules available for delivery!
      • For Use With NSG 5500 & Autowave
      • Free Technical Support & 2 Days Free Transit
      • Capacitive Stability Mode & Fast Slew Rate
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The PA5840-300 by Teseq is an 100 Amp DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMI immunity test equipment rental price. This fast, reliable, and modular battery simulator supply comes with up to 18 kW of power and is designed to simulate 12, 24, and 42 V vehicle electrical systems. We also offer rentals of the PA 5840 25Amp version designed for use with Teseq automotive immunity generators/systems.

This Automotive EMC Test Equipment provides dips and interrupts for a diverse set of automotive EMI standards including ISO 7637, waveforms 2b and 4. The PA 5840 also allows for testing to military automotive immunity standards including MIL-STD-461E. This latest Teseq model has 4 quadrant operation, important in the EV environment.

The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used.This automotive transient immunity generators setup also allows for High bandwidth up to 150 kHz. To facilitate the most efficient testing we provide rentals of both the 100 amp and the PA 5840-75 25 Amp model.  

Power Amplifier/Battery Supply

In Stock

25Amp Automotive Battery Supply Features 

      • Large Inrush Current Capability - Four quadrant operation 
      • Laptop & ISO 17025 Calibration Included
      • 25 Amp & 100 Amp modules available for delivery!
      • For Use With NSG 5500 & Autowave
      • Free Technical Support & 2 Days Free Transit
      • Capacitive Stability Mode & Fast Slew Rate
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The PA5840-75 by Teseq is an 25 Amp DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMI immunity test equipment rental price. This fast, reliable, and modular battery simulator and is designed to simulate 12, 24, and 42 V vehicle electrical systems. We also offer rentals of the PA 5840 100Amp version designed for use with Teseq automotive immunity generators/systems.

This Automotive EMC Test Equipment provides dips and interrupts for a diverse set of automotive EMI standards including ISO 7637, waveforms 2b and 4. The PA 5840 also allows for testing to military automotive immunity standards including MIL-STD-461E. This latest Teseq model has 4 quadrant operation, important in the EV environment.

The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used.This automotive transient immunity generators setup also allows for High bandwidth up to 150 kHz. To facilitate the most efficient testing we provide rentals of both the 100 amp and the PA 5840-300 100 Amp model.  

ISO 7637-2 Transient Pulse System

Automotive Immunity Generator Features 

      • ISO 7637-2 & OEM - Single Unit Solution!
      • Laptop with Software & ISO 17025 Calibration
      • Includes - +ARB, LD5550, MT5511, & Software
      • Free Technical Support & 2 Days Free Transit
      • PA 5480 (Batter Simulators) - 25A & 100A Rentals
      • Prorated Daily Rate After First Month
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq NSG 5500 rental offers solutions for transient immunity testing based on ISO 7637-2 pulses 1, 2a, 3a, 3b, and the load dump pulses from ISO 16750-2.  It includes the +ARB Option for pulses 2b and 4. Our rental systems also have built in the MT5511, LD5550, +ARB, and come with Autostar Software with a laptop to control the unit(s). All of our automotive rentals include an accredited calibration in the rental price. This Teseq automotive transient generator includes a coupler/battery switch for testing requiring battery coupling. 

The NSG 5500 system allows for testing to international, commercial, and company specific standards including. The Arbitrary waveform generator option supports >64,000 segments plus 1GB of Clone data with up to 10Ms/s 16 bit operation. Control of the testing parameters is done through PC running AutoStar™ software. This Teseq automotive immunity generator rental offers testing to be completed through a single output connector.

This turnkey product comes with a laptop with software pre-installed for efficient testing. Additional inputs and outputs are located on the rear panel for test execution control purposes and monitoring. It is the first product to offer a completely internal 100 amp. battery switch for transient immunity testing. These rental transient immunity generators can be used with the PA 5840-300 battery Simulator or the PA 5840-75 Battery Simulator.

Automotive Transient Pulse System

Automotive Immunity Test System Features 

      • ISO 7637-2 & OEM Standards - Single Solution
      • Laptop with Software & ISO 17025 Calibration
      • Includes - NSG 5500, PA 5840, & ACC Clamp
      • Free Technical Support & 2 Days Free Transit
      • PA 5480 (Batter Simulators) - 25A & 100A Rentals
      • Prorated Daily Rate After First Month
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq NSG 5500, PA 5840, and automotive coupling clamp (conducted immunity system) are designed for ISO7637-2 (pulses 1-7) and a variety of manufacturer (OEM) standards. This system is a combination of three different Automotive EMI products providing a complete test system. Each one of the major components can be rented individually, comes with a laptop, and is calibrated to ISO 17025. We offer rentals, as short as a week, providing a cost effective solution for a short term testing need.

Volvo Parts & Component EMC Solutions (Teseq & EM Test)
Volvo Parts & Component EMC Solutions (Teseq & EM Test)
Volvo Standard 515-0003 pertains to devices and components to be used in Volvo Group vehicles or products and must not degrade the electrical environment where it is installed. An additional consideration per this standard is that it specifically calls out compliance with relevant EC and other national regulations. This standard includes load dump requirements, which is one of the 5 pulses mentioned specifically in section 5 conducted susceptibility within the standard. This standard can be downloaded through the Volvo website and is currently in its 5th issue. This standards testing requirements for conducted susceptibility, include mention of both ISO 7637-1, ISO 7637-2, ISO 7637-3, and ISO 16750-2. Take advantage of fast delivery, A2LA accredited calibrations, and often times a laptop to facilitate a turnkey solution.