Rent Current Monitoring Probes

Rent current monitoring probes for both conducted emissions measurements and transient waveform verification. Our inventory of ISO 17025 calibrated monitoring probes are also used in conducted RF testing to IEC 61000-4-6 as well as MIL-STD-461 testing.

Showing 1 - 8 of 8 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Fischer F-33-1 Front Side Fischer F-33-1 Side
Fischer F-33-1 - Rent 250 MHz Current Monitoring Probe
  • Frequency 10 kHz - 250 MHz 
  • Includes FCC-MPCF-3 Calibration Fixture
  • Internal Diameter of 32 mm
Fischer F-33-2
Fischer F-33-2 - Rent 250 MHz Current Monitoring Probe
  • Frequency 1 kHz - 250 MHz 
  • Includes FCC-MPCF-3 Calibration Fixture
  • Internal Diameter of 32 mm
In Stock
Teseq MD 4070A - Front Side Teseq MD 4070A - Front
Teseq MD 4070A - Rent 4 kHz to 400 MHz Monitoring Probe
  • Frequency 4 kHz - 400 MHz 
  • Includes PCJ 8201B Calibration Fixture
  • Suitable for BCI Testing to ISO & MIL-STD
In Stock
TekBox TBCP2 Front Side TekBox TBCP2 Front
TekBox TBCP2 - Rent 750 MHz Current Monitoring Probe
  • Frequency 10 kHz - 750 MHz 
  • Includes TBCP4-750 Calibration Fixture
  • Internal Diameter of 32 mm
In Stock
Com-Power CLCE-400 - Side vertical Com-Power CLCE-400 - Side Top
Com-Power CLCE-400 - Rent 400 MHz RF Monitoring Probe
  • Frequency 10 kHz - 400 MHz 
  • Internal Diameter of 32 mm
  • Includes FCLCE-1000 Calibration Fixture
Solar Electronics 9123-1N Current Probe 10 kHz - 450MHz
Solar Electronics 9123-1N Current Probe 10 kHz - 450MHz
  • Frequency Range 10 kHz - 450 MHz
  • Probe Peak 60A Max; CW Current Max 40A
  • Rented with CS115 & CS116 Test Kit
In Stock
Pearson 101 - Current Monitor 200 Amp RMS Max Pearson 101 - Current Monitor 200 Amp RMS Max
Pearson 101 - Current Monitor 200 Amp RMS Max
  • Maximum RMS Current 200 Amps
  • Usable Rise time 100 Nanoseconds
  • Sensitivity 0.01 Volt/Ampere +1/-0%
In Stock
Pearson 110 - Front Pearson 110 - Rent Current Monitoring Probe 65 Amp RMS
Pearson 110 - Rent Current Monitoring Probe 65 Amp RMS
  • Maximum RMS Current 65 Amps
  • Usable Rise time 20 Nanoseconds
  • Sensitivity 0.1 Volt/Ampere +1/-0%
Monthly Rental-$150
In Stock