ISO 11452-2 - Radiated Shielded Enclosure Immunity Equipment
Amplifier Rentals
10kHz-18Ghz Rentals
Antenna & Equipment Rentals
Rental EMI Solutions
ISO 11452-4 BCI Equipment
Bulk Current Injection Systems
All ISO 11452 Equipment
Rental Solutions
- 80 MHz - 1 GHz 300 Watts Psat (min)
- 250 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- 80 MHz - 1 GHz 150 Watts Psat (min)
- 125 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- Frequency Range 20 MHz to 300 MHz
- Maximum 300 Watts Continuous
- Antenna Factor 6 to 21 dB, 20 V/m Max
- 10 kHz - 400 MHz 110 Watts Psat (min)
- 80 Watts Power P1dB (min)
- Class A Operation & Ethernet Control
- Rugged Maple Wood Adjustable Tripod
- Standard 1/4-20 Mounting Thread
- Reversible Legs: Rubber Feet & Spike Tips
- Single-Channel 5 MHz Video Bandwidth
- Rented with E9300B 18GHz Average Sensor
- Ideal for CW Power Level Verifications
- Frequency Range 30 MHz to 6 GHz
- Ideal for Sweeping Across Frequency Range
- Average 2:1 VSWR Above 50 MHz
- Frequency Range 100 kHz - 6 GHz
- Field Strength 0.5 - 800 V/m
- Suitable for IEC 61000-4-3 Field Verification
- Designed for EMF Measurements to 60 GHz
- Provides X, Y, Z and Total Field Data via Screen
- SMP2 Software, Fiberoptic Cable, & Laptop Included
- Magnetic Field Measurement (H Field) Probe
- DC to 40kHz Continuous Frequency Range
- Static and Time-variable Field Measurements
- Frequency Range 300 kHz - 3 GHz
- Ideal for Identifying Radiated EMI Noise
- Thin Design Ideal for Getting Between Components
- Magnetic & Electric Field Measurement Probe
- H-Field & E-Field Frequency 1 Hz- 400 kHz
- Max Range 100 kV/m & 10 mT; Noise (< 4 mV/m)
- Electric Field Probe 300 kHz - 18 GHz
- High Sensitivity from for 0.5V/m Measurements
- Max 250 V/m CW & 30 V/m RMS Fields
- Frequency Range 1 GHz to 8 GHz
- Ideal for Emissions Pre-Compliance to CISPR 16
- Antenna Factor from 24 to 43 dB/m Over Range
- Frequency Range: 9 kHz - 30 MHz
- Electric or Magnetic Field Measurements
- Fiber Optic Remote Monitor/Control option
- Frequency Range 2 MHz to 6 GHz
- Often used with EMC Near Field Probes
- Input: 50 Ohm, SMA; Output: 50 Ohm, SMA
Overview
General Testing Information
Section 2 of this automotive radiated immunity standard covers 80MHz to 18GHz and follows the information put forward in ISO 11452-1 overview. Given the large frequency range requirements, multiple antennas and amplifiers could be required. It also places specific requirements on test setups for the three main types of antennas, horn, log-periodic, and Biconical antenna. It also requires vertical polarization and horizontal polarization over varying ranges within the total range. Annex A covers Artificial Network (AN) which is required by this section in detail. It also splits the frequency range over four different frequency bands (F1-F4). Below is the suggested test severity level from Incompliance.
