Showing 1 - 16 of 37 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
Teseq Automotive Conducted Immunity Test System - Front Side Teseq Automotive Conducted Immunity Test System - Front Forward
Teseq ISO 7637-2/-3 Test System - Rent Immunity Test Package
  • Includes NSG 5500, PA 5840, & CDN 400
  • ISO 7637-2 & ISO 7637-3 Tests
  • Battery Simulators up to 60 V 100 A
PA 5840 - Front PA 5840 - Back
Teseq PA 5840-300 - Rent 100Amp Automotive Battery Simulator
  • -15 to +60 Volts 100 Amps Continuous
  • High Bandwidth up to 150 kHz
  • 300 Amp Inrush Current Capability
In Stock
Teseq PA 5840-75 25 Amps - Front Side Teseq PA 5840-75 25 Amps - Front
Teseq PA 5840-75 - Rent 25 Amp Battery Simulator
  • -15 to +60 Volts 25 Amps Continuous
  • High Bandwidth up to 150 kHz
  • 75 Amps Inrush Current Capability
Teseq NSG 5500 Front Side Teseq NSG 5500 Front
Teseq NSG 5500 - Rent Automotive Transient Test Generator
  • Test System for ISO 7637-2/3 Requirements
  • Battery Simulators Available up to 100 Amps
  • Pre-programmed International & OEM Tests
In Stock
EM Test LD 200N - Front Side EM Test LD 200N - Front
EM Test LD 200N - Rent Load Dump Generator
  • Generators Clipped Load Dump Pulses
  • Tests to ISO 7637-2 & ISO 16750-2 Load Dump
  • Built-in CDN Max 80 Volts 30 Amps
In Stock
EM Test CA ISO Load Resistor device for pulse verification
EM Test CA ISO - Rent Resistor Kit for Load Dump Verification
  • Includes all Required Load Resistor Values
  • Resistors with very low inductance
  • Highly accurate resistors (+/-1%)
EM Test CA EFT Kit - Attenuators EM Test CA EFT Kit - Case & Accessories
EM Test CA EFT Kit - Rent EFT/Burst Pulse Verification Kit
  • Calibration Kit Designed for EM Test Systems
  • Compliant to IEC 61000-4-4 & ISO 7637, Annex D
  • Includes KW 50 (50Ω) & KW1000 (1kΩ)
EM Test ACC front side EM Test ACC - Side
EM Test ACC - Rent Automotive Capacitive Coupling Clamp
  • ISO 7637-3 & OEM Compliant Solution
  • Accepts Cables up to 40mm Diameter
  • Solution for Testing Shielded Signal Lines
In Stock
EM Test AutoWave - Front Side EM Test AutoWave - Front
EM Test AutoWave - Rent 2 Channel Waveform Generator
  • 2-channel Arbitrary Waveform Generator
  • Dual-Processor-Technology, 500kS/s sample rate
  • Library of Standard Test Routines
EM Test VDS200N - Side EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 15 Amps
  • Voltage Drop Simulator with Low Output Impedance
Cal Test CT3681 with Cables Cal Test CT3681 Front
Cal Test CT3681 - Rent 7 kV Differential Probe
  • Up to ±7 kV Differential & Common Mode
  • 70 MHz Bandwidth (-3 dB)
  • Selectable Attenuation 100x/1000x
In Stock
EM Test VDS 200N30 - Front Side EM Test VDS 200N30 - Front
EM Test VDS 200N30 - Rent 30 Amp Voltage Drop Simulator
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Maximum 60 Voltage 30 Amps
  • Voltage Drop Simulator with Low Output Impedance
EM Test UCS 200N100.2 - Front Side EM Test UCS 200N100.2 - Front
EM Test UCS 200N100.2 - Rent Transient Generator 100 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 100 Amps
EM Test UCS 200N50 - Front Side EM Test UCS 200N50 - Front
EM Test UCS 200N50 - Rent Microburst Generator 50 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 50 Amps
Cal Test CT4079 Probe and Cables Cal Test CT4079 Front Side
Cal Test CT4079 - Rent 15 kV Differential Probe
  • Up to ±15 kV Differential or ±1.5 kV Common
  • Attenuation 200x or 2000x, 50 MHz Bandwidth
  • Rented with Teseq NSG 3150 Test System
EM Test VDS 200Q50.2 - Front Side EM Test VDS 200Q50.2 - Front
EM Test VDS 200Q50.2 - Rent 50 Amp Battery Simulator
  • -60 to +60 Volts 50 Amps Continuous
  • Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
  • Extended Range 80 Volts 40 Amps