Teseq KEMZ 801A - Front Side Open
Teseq KEMZ 801A - Side Open
Electromagnetic EM Clamps Overview - IEC 61000-4-6 Injection Method Equipment
Teseq KEMZ 801A - Side Closed
Teseq KEMZ 801A - Side Top

Teseq KEMZ 801A

Rent 1 GHz 100 Watt EM Clamp

In Stock & Ready To Ship
Orders by 3pm ship today

The Teseq KEMZ 801A is an electromagnetic clamp for IEC 61000-4-6 immunity testing, combining inductive and capacitive coupling across 10 kHz to 1 GHz while accommodating 20 mm cables in diameter.

Features

  • Frequency Range 10 kHz to 1 GHz
  • Includes CAL 801A Calibration Adapters
  • 50 Ohm Termination Load Provided 
  • 10 kHz - 230 MHz 100 Watts Maximum
  • 20 mm Maximum Cable Diameter
Order Tyle
Up to 4 Free Days of Transit Time
Two transit days each way are excluded from rental period
  • KEMZ 801A Serial s/n
  • CAL 801A Serial  (2 Pieces)
  • LE 211A golden bar
  • 50 Ohm Termination (N)
  • Printed Manual
  • N to BNC Adapters 3pcs
  • Black Pelican Case
  • Can't find something? Contact Us

Description

IEC 61000-4-6 (EN 61000-4-6) defines three basic types of transducers used for the injection of test signals into the equipment under test (EUT). The basic requirement is to inject a known level of RF signal into the cable of the EUT at each test frequency and to determine a possible susceptibility of the EUT. The EM clamp injects the disturbance signal by a combination of inductive and capacitive coupling.

The normative Annex A of IEC/EN 61000-4-6 specifies the EM clamp and provides additional information regarding the clamp characterization. The KEMZ 801A complies to the standard. The adapter kit CAL 801A, which allows test level setting and correction factor measurement, is offered optionally. The calibration fixture CAL KEMZ is made for the S-parameter measurements as defined in Annex A of IEC/EN 61000-4-6 edition 4.

Technical Specifications:
Frequency range:
10 kHz to 1000 MHz
Nominal impedance:
50 Ohms
Connector:
N-type female
Maximum input level
0.01 to 100 MHz:
100 W for 15 min
100 to 230 MHz:
100 W for 3 min
230 to 1000 MHz:
50 W for 3 min
Correction factor 0.15 to 300 MHz:
>= -4 dB/<= 5 dB (see graph)
Clamp opening diameter:
approx. 21 mm
Maximum cable diameter:
20 mm
Dimension (LxWxH):
647 mm x 130 mm x 105 mm
Height of ferrite center above ground:
50 mm
Distance to the reference point (first ferrite):
approx. 22 mm
Weight:
approx. 7 kg
Teseq KEMZ 801A Datasheet
Download

Video Library

Video Guides
Related Videos

Rent the Teseq KEMZ 801A

Weekly, two-week and monthly rentals available.

Questions?630-887-0329