Showing 33 - 48 of 69 products
Quick Access
Return Instructions

Rental Terms


  1. TSI retains title of all equipment. Customers are precluded from altering, assigning, modifying or encumbering the equipment in any way.
  2. Equipment is shipped F.O.B. shipping point and must be returned prepaid and insured to TSI per shipping instructions included with the equipment. Customers are responsible for all taxes and duties related to the lease of the equipment.
  3. The lease is non-cancelable for its initial term and may not be renewed without permission from TSI. If it is renewed, the customer is responsible for all lease charges accrued whether or not the customer has issued additional purchase orders.
  4. In the event that the equipment is non-functional, lease charges are abated from the date that notification is given to TSI, until a replacement unit is furnished to the customer. Notification of a non-functional unit must be given within 72 hours of delivery or the customer will be responsible rental charges accrued between delivery date and the date they notified TSI of a problem. Notification of missing accessories must be given within 72 hours of delivery or the customer will be responsible for the return of all accessories listed on the packing list.
  5. The customer shall bear all risks of loss or damage to the equipment from the time of shipment until TSI receives the equipment in good working order, unless notification is given per sec. 5.
  6. The customer agrees that TSI has not made any representation of warranty, expressed or implied (except as stated in the document) on the equipment and the responsibility for equipment selection, suitability and fitness of use for a particular purpose lies solely with the customer.
  7. The customer will hold TSI harmless from all claims and expenses resulting from the selection, delivery, use and/or possession of any equipment obtained from or through TSI.
  8. In the event of default by the customer of any of the above terms and conditions, TSI shall be entitled to the immediate possession of this equipment.
  9. The customer agrees that the terms and conditions listed here shall supersede any conflicting terms in, or attached to, the purchase order.
  10. This agreement shall be interpreted according to the laws of the State of Illinois. The customer shall pay to TSI all costs and expenses, including reasonable attorneys’ fees, incurred by TSI in exercising any of its rights or remedies with regard to the rental or enforcement of any of these terms and conditions.
FAQs
EMC Partner CN 16 - Front EMC Partner CN 16 Side
EMC Partner CN16 - Coupler for Common Mode Testing
  • 415 V AC/Sweep Tests & 115 V DC Tests  
  • Manual Coupler for 1, 2 or 4 Power Lines
  • Rented with Common Mode Test System
In Stock
CDN 2000-06-25 - Side CDN 2000-06-25 - Front
EMC Partner CDN 2000-06-25 - Rent 3-Phase 25 Amp CDN
  • Coupler for Damped Oscillatory Pulses
  • Maximum 480 Volts 25 Amps AC
  • Rented with MIG-OS-OS1 Generator
EM Test CNI 508N2 Front Side EM Test CNI 508N2 Front Connections
EM Test CNI 508N2 - Rent Communication Line Coupler 1GBIT/S
  • CDN for Shielded & Unshielded Data Lines
  • Maximum 3 kV Surge & 4 kV EFT/Burst
  • Compatible to PoE and PoE+ requirements
TF 14A - Top
Teseq ITF 14A - Rent 60 dB Isolation Transformer
  • Isolation transformer 60 dB
  • Maximum 230 Volts 14.4 Amps
  • Meets the requirements of IEC 61000-4-16
In Stock
Teseq IMN2 - Side Teseq IMN2 - Front
Teseq IMN2 Impedance Matching Network - Surge impulse Generators
  • Impulse Range: Up to 8,000 V and 4,000 A
  • IEC 61000-4-5 Ed.3 Pulse Impedance Matching
In Stock
EM Test Coupling NX7 bsr-3-480-32 - Front Side EM Test Coupling NX7 bsr-3-480-32 - Front
EM Test Coupling NX7 bsr-3-480-32 - Rent 3-Phase 32Amp CDN
  • Coupler for Surge, EFT, & Ringwave Pulses
  • Max 480 Volts 32 Amps AC
  • Automatic Coupler for NX5/NX7 Systems
EM Test NX7 & 3-Phase CDN - 7kV Transient System EM Test NX7 & 3-Phase CDN - 7kV Transient System
EM Test NX7 & 3-Phase CDN - 7kV Transient System
  • 3-Phase EM Test Transient Test Platform (Coupling NX7)
  • Compliant for Surge, EFT, & Ringwave on Power 
  • Automatic Coupler 480Volt/32Amps Max EUT/DUT
EM Test Compact NX7 Front Side EM Test Compact NX7 Front
EM Test Compact NX7 - Rent 7 kV Compact Transient Generator
  • 7 kV Surge, 5.5 kV EFT, & 7 kV 100 kHz Ringwave
  • Built-in single phase CDN Max 300 V/16 A AC or DC
  • Laptop with iec.control software included
In Stock
EMC Partner MIG-OS-OS1 Front Side EMC Partner MIG-OS-OS1 Front
EMC Partner MIG-OS-OS1 - Rent Slow Oscillatory Wave Generator
  • 100 kHz & 1 MHz 3 kV DOW Generator
  • Rented with EMC Partner CDN 2000-06-25
  • Compliant to IEC 61000-4-18 Slow Pulses
In Stock
Teseq CDN 3153-S63 - Front Side Teseq CDN 3153-S63 - Front Top
Teseq CDN 3153-S63 - Rent 3-Phase CDN NSG 3150
  • Max: 690 Volts Phase to Phase, 63 Amps
  • Rented with Teseq NSG 3150 Test System
  • Compliant for IEC 61000-4-5 Coupling Methods
EM Test UCS 500N5E Front Side EM Test UCS 500N5E Front
EM Test UCS 500N5E - Rent 5.5 kV EFT/Burst Generator
  • Configured for 5.5 kV EFT/Burst Immunity Testing
  • Built-in CDN Max 300 V/16 A AC
  • Rent Capacitive Clamp for Data Line Testing
In Stock
EMC Partner DOW3000 Front Side EMC Partner DOW3000 Front
EMC Partner DOW3000 - Rent Fast Damped Oscillatory Generator
  • 3 MHz, 10 MHz, & 30 MHz 4 kV DOW Generator
  • Built-in CDN Max 690 V/32 A AC or 500 V/32 A DC
  • Compliant Test System IEC 61000-4-18
In Stock
EMC Partner - DOW3000 & MIG-OS-OS1 EMC Partner - IEC 61000-4-18 System
IEC 61000-4-18 DOW Test System - Fast & Slow Wave Rental
  • Fast & Slow Damped Oscillatory Wavefrom Systems
  • Complete DOW solution to IEC 61000-4-18
  • Both Systems Include Coupling Decoupling Network
In Stock
EMC Partner PS3 - 3kW Pre-Programmed Power Supply EMC Partner PS3 - 3kW Pre-Programmed Power Supply
EMC Partner PS3 - 3kW Pre-Programmed Power Supply
  • Outputs: 230 V/50 Hz, 115 V/60 Hz, & 115 V/400 Hz
  • Compliant to IEC 61000-4-28 Frequency Variations
  • Included with Common Mode Test System
EMC Partner EXT-IMU C-SHORT Front Side EMC Partner EXT-IMU C-SHORT Front
EMC Partner EXT-IMU C-SHORT - IMU Common Extension
  • Power Frequencies: DC, 16.67 Hz, 50 Hz, & 60 Hz
  • Output voltage 30 V – 330 V for 1000 seconds
  • Included with Common Mode Test System
In Stock
EM Test NX7 bsprt-1-400-32 - Front Side EM Test NX7 bsprt-1-400-32 - Front
EM Test NX7 bsprt-1-400-32 - Rent Telecom Transient Generator
  • 7 kV Surge, Ringwave, Telecom Surge, & 5.5 kV EFT
  • Built-in single phase CDN Max 400 V/32 A AC or DC
  • 400 Volt Model: bsprt-1-400-32
In Stock