EM Test Dito

Rent & Buy 16 kV ESD Simulator
In Stock - Order by 3 p.m. ships today
  • 16 kV Air & 10 kV Contact Discharge (10 V Steps)
  • Light Weight Ergonomic Design
  • 150 pF/ 330 Ohm Network Installed
  • Library of Standard Test Routines
  • Rentals Include ISO 17025 Calibration with Data
Order Type

Included Accessories

  • ESD Simulator
  • Battery
  • Charger
  • Air Discharge Tip
  • Contact Discharge Tip
  • Ground Strap
  • Alligator Clip
  • Printed Manual
  • Calibration Documentation
  • Plastic Case 
Can't find something? Contact Us
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Description

Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. The dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements

Test Levels:
CD mode
500V - 10,000V +/-5%
AD mode
500V - 16,500V +/-5%
Resolution
100V steps
Holding time
More than 5 seconds
Polarity
Positive, negative
Test voltage
measured, indicated in the display
Trigger:
Single mode
Release of single pulses
Continuous mode
Continuous discharge up to 20Hz (AD) and 10Hz (CD)
Pulse release via software
Remote control from computer via fiber optic link (USB)
Output:
CD mode
EN/IEC 61000-4-2; 150pF/330ohm
Rise time
0.8ns +/- 25%
Current 1st peak
7.5A +/- 15% @2kV
15.0A +/- 15% @4kV
22.5A +/- 15% @6kV
30.0A +/- 15% @8kV
Current at 30ns
4.0A +/- 30% @2kV
8.0A +/- 30% @4kV
8.0A +/- 30% @4kV
12.0A +/- 30% @6kV
16.0A +/- 30% @8kV
Current at 60ns
2.0A +/- 30% @2kV
4.0A +/- 30% @4kV
6.0A +/- 30% @6kV
8.0A +/- 30% @8kV
Test Routines:
Easy Zap
Test based on standard levels
Quick Zap
All test parameters are adjustable during test; fast and easy-to-use
Evaluation
Air discharge with 20Hz; for test point evaluation on the DUT
Standard Test routines
As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2
Set-up
Parameters, standard levels, etc.
Display and Controls:
Display
LCD graphic display; 128 x 64 pixels
Operation
5 function keys, 2 cursor keys, pulse trigger
Operation:
Battery (ACCU)
More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh
Mains supply
Via mains supply adapter (MAD)
General Data:
Weight
870 gramms incl. battery
Case material
ABS; non-inflammable as per UL 94VO
Temperature
5C - 40C (operation conditions)
Rel. humiditiy
20% - 80% (operation conditions)
Battery charger
100V - 240V +/-10%; 50/60Hz Charging time less than 2 hours
Accessories
DM1
150pF/330ohm discharge module with built-in contact discharge relay; Discharge tips for AD and CD
PowerPack dito
Rechargeable battery LiFePo4 12.8V - 1000mAh Built in safety module for low voltage protection
CU dito
Charging Unit dito Battery charger
esd.control
Remote control and documentation software incl. optical interface IFA
VCP
Vertical coupling plane 50cm x 50cm, incl. EAS 30 grounding set 2x470kohm
EAS 30
Grounding set 2x470kohm
OptoLink
Fiber optic link between dito and PC (USB port) fitted with USB A connector, length 3m or 6m, max. baud rate of 19,200.
Video Guides
EM Test Dito ESD Simulator Overview
Related Videos
ESD Simulator Comparison