EM Test Dito - Rent & Buy 16kV ESD Simulator

In Stock - Order By 3PM Ships Today!

EM Test ESD Simulator Features:

  • 16kV Air Discharge & 10kV Contact Discharge (10V Steps)
  • Ergonomic Design, Light Weight, & Point and Test
  • IEC 61000-4-2 ESD Simulator, 150pF/330Ω Network
  • Adjustable +/- Polarity, Various Test Routines & Standards
  • Rent & Purchase Units from Ametek ESD Distributor

Included Items, View Packing List
Got Questions?
Get technical support
Sale price$295
Request A Quote

EM Test Dito Test Accessories



Rent the Dito by EM Test a hand-held, lightweight ESD simulator that allows for air discharge to 16.5kV and contact mode to 10kV for testing to IEC 61000-4-2. A2LA accredited calibration is included in the EMC rental equipment price.Transient Specialists is the only authorized sale partner of EM Test ESD simulators in the United States. EM Test a leading manufacturer of electronic test equipment has created this product to simulate an electrostatic discharge between two different objects including the human body. 

The Dito rental comes with an 150pF/330Ω discharge network for testing to IEC 61000-4-2 and other EMC immunity testing standards. This cordless ESD simulator is powered by a rechargeable battery and has enough energy to 50,000 pulses at 16.5kV. Discharge tips and discharge networks can easily be changed without disassembling the gun; simply remove one and plug-on another tip or module

This EM Test generator comes with pre-programmed test routines allowing for user to easily test to EN IEC 61000-4-2, ANSI C63.16, and many others. The discharge modules are automatically recognized and the R/C configuration is shown in the display of the test equipment. The display is easy to manipulate and requires minimal effort to change testing parameters. The Dito rental comes with both air and contact discharge tips.

Data Sheet User Manual Quick Reference Guide


Common ESD Standards

EN/IEC 61000-4-2 & ANSI C63.16

RC Network

150 pf/ 330 ohm

Voltage Range Air Discharge

500V to 16.5kV ±5%

Voltage Range Contact Mode

500V to 10kV ±5%


Positive, negative



Holding time

More than 5 seconds

Test voltage

measured, indicated in the display

Single mode

Release of single pulses

Continuous mode

Continuous discharge up to 20Hz (AD) and 10Hz (CD)

Pulse release via software

Remote control from computer via fiber optic link (USB)

CD mode

EN/IEC 61000-4-2; 150pF/330ohm

Rise time

0.8ns +/- 25%

Easy Zap

Test based on standard levels

Quick Zap

All test parameters are adjustable during test; fast and easy-to-use

Standard Test routines

As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2

Repetition Rate

Single shot mode, 1 shot/sec, 20 shots/sec AD,  10 shots/sec CD


Yes, preprogrammed test routines included

Remote Control

Via USB fiber optic link

Battery Recharge Time

ACCU battery Less than 1.5 hours

Useable During Recharge



940 grams, 2.1 pounds


33x13x8cm, 13x5x3 inches

All Accessories

Additional Testing Accessories Dito ESD Simulator:

INA/ITEM # Description

Dito Battery 

DM1-RFCI Fast Relay Discharge module with 150pF/330ohm; Rise time 200ps - 300ps

Dito Battery Charger


ESD.controlSoftware for dieo, ESD 30N with optolink cable


Discharge module 150pF/2,000ohm


Discharge module 330pF/2,000ohm


Discharge module 100pF/1,500ohm


Customer specific discharge module


Vertical coupling plane 50cm x 50cm, incl. EAS 30 grounding set 2x470kohm

EAS 30

Grounding set 2x470kohm


Power mains adaptor



General ESD Testing Accessories:

INA/ITEM # Description
MD 102 MD 102A Calibration target as per IEC 61000-4-2 with 2ohm for calibration/verification 
INA 414-2M Bleeder resistor cable (2x470 kOhms) - Length 2 meters
INA 414

Bleeder resistor cable (2x470 kOhms) - Length 80 cm

INA 102A 50 Ohm Calibration adapter for MD 102
INA 417B Opto-link to a PC with 10 m opto-cable


Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

You may also like

Recently viewed