Com-Power ISN/CDN-T8SE - Front Side
Com-Power ISN/CDN-T8SE - Front
Com-Power ISN/CDN-T8SE - Side
Com-Power ISN/CDN-T8SE - Back

Com-Power ISN/CDN-T8SE

Rent ISN for Shielded RJ45 Ports

The Com-Power ISN/CDN-T8SE supports emissions and immunity testing on shielded lines with four balanced pairs, using RJ45 connections to 30 MHz as an ISN or 230 MHz as a CDN.

Features

  • Utilized for both Immunity & Emissions Tests
  • CISPR 16-1-2, CISPR 22/32 Compliant
  • Designed for up to Four Balanced Pairs
  • Includes 50 Ω to 150 Ω Calibration Adapters
  • Current ISO 17025 Accredited Calibration
Order Type

Description

The CDN-T8SE is used during conducted emissions or immunity tests on devices with signal/telecom ports intended for connection to shielded (or screened) lines with up to four balanced pairs. The EUT and AE ports of the CDN-T8SE are equipped with shielded RJ45 receptacles. The RF input/output port is located on the top side of the network, and is fi tted with a female BNCtype connector.

The outer surface of the network’s metallic enclosure is powder coated for durability, and is mounted onto an untreated (conductive), stainless steel base plate. The base plate extends beyond the footprint of the network enclosure at the front and back, providing convenient access to eff ectively ground the network, which is essential.

Any individual Com-Power CDN may be purchased separately, or as part of a CIS series conducted immunity test system. Test systems also include an ACS series power amplifi er, as well as the required accessories.

Specifications:
Line parameters:
4 pairs, balanced, shielded, 100 Ohm impedance
Frequency Range
150 kHz to 30 MHz (as ISN)
150 kHz to 230 MHz (as CDN)
Max Input Voltage
40 Vrms
Application
Screened lines w/up to 4 balanced pairs
Current rating
1.5 Amps (max)
Voltage rating
125 VAC (line to GND)
RF Input Connector
50 Ohm BNC (female)
EUT/AE Port Connections
Shielded RJ45
Common mode impedance
150 kHz to 30 MHz: 150Ohms +/- 20Ohms
30 MHz to 80 MHz:150Ohms +60Ohms / -45Ohms
80 MHz to 230 MHz: 50Ohms +/-60Ohms
Voltage Division Factor
150 kHz to 30 MHz:10 dB +/-1 dB
30 MHz to 230 MHz: 10 dB +2 dB / -1 dB
Decoupling Attenuation (Isolation)
150 kHz to 5 MHz: >70 dB
5 MHz to 30 MHz:>60 dB
30 MHz to 80 MHz:>50 dB
80 MHz to 230 MHz:>40 dB
Dimensions
8.5 x 4.5 x 3.5 Inches (21.5 x 11.4 x 8.8 cm)
Com-Power ISN/CDN-T8SE Datasheet
Download
Com-Power ISN/CDN-T8SE User Manual
Download

Rent the Com-Power ISN/CDN-T8SE

Weekly, two-week and monthly rentals available.

Questions?630-887-0329