EM Test Dito - Rent & Buy 16 kV ESD Simulator

EM Test ESD Simulator Features:

  • 16kV Air Discharge & 10kV Contact Discharge (10V Steps)
  • Ergonomic Design, Light Weight, & Point and Test
  • IEC 61000-4-2 ESD Simulator, 150pF/330Ω Network
  • Adjustable +/- Polarity, Various Test Routines & Standards
  • Rent & Purchase Units from Ametek ESD Distributor

Included Items, View Packing List

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

EM Test Dito Test Accessories

Description

Overview

Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. The dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements

Data Sheet User Manual Quick Reference Guide

Specifications

Common ESD Standards

EN/IEC 61000-4-2 & ANSI C63.16

RC Network

150 pf/ 330 ohm

Voltage Range Air Discharge

500V to 16.5kV ±5%

Voltage Range Contact Mode

500V to 10kV ±5%

Polarity

Positive, negative


Resolution

100V

Holding time

More than 5 seconds

Test voltage

measured, indicated in the display

Single mode

Release of single pulses

Continuous mode

Continuous discharge up to 20Hz (AD) and 10Hz (CD)

Pulse release via software

Remote control from computer via fiber optic link (USB)

CD mode

EN/IEC 61000-4-2; 150pF/330ohm

Rise time

0.8ns +/- 25%

Easy Zap

Test based on standard levels

Quick Zap

All test parameters are adjustable during test; fast and easy-to-use

Standard Test routines

As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2

Repetition Rate

Single shot mode, 1 shot/sec, 20 shots/sec AD,  10 shots/sec CD

Programmable

Yes, preprogrammed test routines included

Remote Control

Via USB fiber optic link

Battery Recharge Time

ACCU battery Less than 1.5 hours

Useable During Recharge

No

Weight

940 grams, 2.1 pounds

Dimensions

33x13x8cm, 13x5x3 inches

All Accessories

Additional Testing Accessories Dito ESD Simulator:

INA/ITEM # Description

Dito Battery 

DM1-RFCI Fast Relay Discharge module with 150pF/330ohm; Rise time 200ps - 300ps

Dito Battery Charger

104877

ESD.controlSoftware for dieo, ESD 30N with optolink cable

DM2

Discharge module 150pF/2,000ohm

DM3

Discharge module 330pF/2,000ohm

DM4

Discharge module 100pF/1,500ohm

DMx

Customer specific discharge module

VCP

Vertical coupling plane 50cm x 50cm, incl. EAS 30 grounding set 2x470kohm

EAS 30

Grounding set 2x470kohm

MAD

Power mains adaptor

 

 

General ESD Testing Accessories:

INA/ITEM # Description
MD 102 MD 102A Calibration target as per IEC 61000-4-2 with 2ohm for calibration/verification 
INA 414-2M Bleeder resistor cable (2x470 kOhms) - Length 2 meters
INA 414

Bleeder resistor cable (2x470 kOhms) - Length 80 cm

INA 102A 50 Ohm Calibration adapter for MD 102
INA 417B Opto-link to a PC with 10 m opto-cable

Videos

Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

You may also like

Recently viewed