Home Automotive EMC Test Equipment Rentals EM Test VDS 200N15

EM Test VDS 200N15

Name: EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
Brand: EM Test
Price: 950.0 USD
Availability: InStock

Rent 15 Amp Battery Simulator

In Stock & Ready To Ship

Orders by 3pm ship today

The EM Test VDS 200N15 is a programmable automotive battery supply simulator delivering up to 15 A for voltage variations, dips, interruptions, and ISO 7637 vehicle electronics immunity testing.

Features

Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)

Maximum 60 Voltage 15 Amps

Voltage Drop Simulator with Low Output Impedance

Pre-programmed Test Routines

Current ISO 17025 Accredited Calibration

Order Type

$950

Weekly Rental

$1,425

Two Week Rental

$1,900

Monthly Rental

Up to 4 Free Days of Transit Time

Two transit days each way are excluded from rental period

Battery Simulator Serial#

Power Cable

USB Interface Cable

Printed Manual

Calibration Documentation

Short Introduction

USB Drive with License & Software

125V Plug

(2) MC Connector Cable (red & black)

(2) Clamps Red & Black

Red Shipping Case

Can't find something? Contact Us

Description

The VDS 200N series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the VDS 200N series as there is a large variety of requirements. Secondly, the VDS 200N series serve as powerful DC voltage supplies for the DUT during the tests with automotive transients. The VDS 200N series covers all three supply voltage categories. Their current capability ranges up to 200A depending on the model and your application.

Specifications:
Output Voltage: 0V - 60V
Output Current: 0A - 15A, continuous
Peak Current: 15A
Frequency Range: DC to 100kHz
Supply Voltage: 115/230V
Weight: 49kg (108.02lbs)
Dimensions: 19 Inches/6HU
COMMON DATA (ALL MODELS)
Ripple voltage: Ur <0.2Vp-p, frequency min. 400Hz
Source impedance: Zi = <10mohm
Sinusoidal signal capability vs. Frequency *): Vpp max. 16V up to 20kHz Vpp max. 10V up to 30kHz Vpp max. 6V up to 50kHz
: Vpp max. 3V up to 100kHz via Analog In, controlled by AutoWave/AMP 200Nx only
: VDS 200N30.1 and VDS 200N50.1: Vpp max. 65V resp. 35V up to 50kHz with respect to the selected voltage range Vpp max. 3V up to 100kHz via Analog In, controlled by AutoWave/AMP 200Nx only
Fuses: Depending on VDS 200N model
TRIGGER
Automatic: Automatic release of the events
Manual: Manual release of a single pulse
External: External release of a single pulse

OUTPUT
DUT Supply +/-: Safety laboratory or high current connectors
Ext. trigger: 5-15V TTL; BNC connector
CRO Trigger: 5V TTL-signal for oscilloscope
TEST ROUTINES FOR ARBITRARY WAVES
DC source: Max. 60V; current depending on VDS 200N model
Functions: Sine Wave Sweep
: Sine Wave (Cranking)
: Clipped Load Dump
: Jump Start
: Extern
: GM 9105P Pulse 4
: Drop and Jump pulse
Standard Test routines: ISO 7637, Pulses 2b and 4 ISO 16750-2 Jaso Test 1
Service: Service, Setup, Self test
INTERFACE
Serial interfaxe: USB
Parallel interface: IEEE 488, addresses 1 - 30
Remote control: To connect an external signal generator (10kohm): 0-10V / 0-50kHz max. 0.5V(p-p) / 0-100kHz

EM Test VDS 200N15 Datasheet

Download

EM Test VDS 200N15 User Manual

Download

1 file

EM Test VDS 200N15 Remote Manual

FAQs

The VDS 200N15 is a programmable automotive battery supply simulator used to reproduce battery voltage variations, dips, interruptions, cranking profiles, and other supply disturbances required by automotive EMC standards and OEM specifications.

The VDS 200N15 provides 0 to 60 V output at up to 15 A continuous and is designed primarily for conventional automotive battery simulation and voltage-drop testing. The VDS 200Q10 provides ±60 V at 10 A continuous with four-quadrant operation, allowing it to both source and sink current. This makes the VDS 200Q10 better suited for more complex bipolar waveforms, LV 124, LV 148, VW 80000, and advanced OEM automotive testing.

The VDS 200N15 provides an output range of 0 to 60 VDC with up to 15 A continuous current, making it suitable for 12 V, 24 V, and many 48 V automotive test applications.

The VDS 200N15 is commonly used for ISO 7637-2 pulse 2b and pulse 4 testing, along with battery supply variation tests defined by ISO 16750-2 and manufacturer-specific requirements.

Yes. The VDS 200N15 can be integrated with equipment such as EM Test transient generators, load dump generators, and AutoWave waveform generators to build a more complete automotive EMC immunity test system.