EMC Partner MIG-OS-OS1 Damped Oscillatory Generator

Damped Oscillatory Generator

EMC Partner MIG-OS-OS1 Damped Oscillatory Generator

Availability: In Stock - Order by 3PM Ships Today!

Damped Oscillatory Test System Features:

      • 3kV 100kHz & 1MHz Damped Waveform
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Used with MF1000-1 for Magnetic Field Testing 
      • Waveforms - 1.2/50, 8/20 μs, 1.2/50 μs 0.5J
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner MIG-OS-OS1 pulse generator with the CDN 2000-6-25 allows for testing for damped oscillatory waves with frequencies of 100 kHz and 1 MHz, comparable to the NSG 3040 SW. An ISO 17025 accredited calibration comes standard with the rental. This products easy to use software allows for quick and easy testing and changing of parameters. This test solution is ideal for testing to a variety of damped oscillatory testing including ANSI C37.90, IEC 61000-4-18, IEC 60255-22-1, and many others.

Damped Oscillatory Test System Features:

      • 3kV 100kHz & 1MHz Damped Waveform
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Used with MF1000-1 for Magnetic Field Testing 
      • Waveforms - 1.2/50, 8/20 μs, 1.2/50 μs 0.5J
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner MIG-OS-OS1 pulse generator with the CDN 2000-6-25 allows for testing for damped oscillatory waves with frequencies of 100 kHz and 1 MHz, comparable to the NSG 3040 SW. An ISO 17025 accredited calibration comes standard with the rental. This products easy to use software allows for quick and easy testing and changing of parameters. This test solution is ideal for testing to a variety of damped oscillatory testing including ANSI C37.90, IEC 61000-4-18, IEC 60255-22-1, and many others.

MIG-System Data Sheet User Manual - MIG-OS-OS1

Common Standards

EN/IEC 61000-4-18 & ANSI C37.90

1 MHz, 100kHz IEC Damped Oscillatory:

 

  Standard:

IEC 61000-4-18, IEC 60255-22-1

  Voltage Peak open circuit

250V – 10% to 3kV + 10%

 Voltage Risetime

 250V – 10% to 3kV + 10%

 Output Impedance

200 Ω ± 20%


  Decay

50% of peak value between 3rd and 6th period

  Burst Duration

1  up to 99 s ± 10%

  Repetition rate maximum

400/s for 1MHz, 40/s for 100kHz

1 MHz ANSI / IEEE Damped Oscillatory:

200 Ω ± 20%

  Standard:

ANSI / IEEE C37.90.1

  Voltage Peak open circuit

250V – 10% to 3kV + 10%

  Voltage Risetime

50 – 100 ns Rise Time

 Oscillation Frequencies

 1MHz – 1.5MHz

  Output Impedance

150 Ω ± 20%

   Decay

50% of peak value after 6 µs

  Burst Duration

1  up to 99 s ± 10%

  Repetition rate maximum

400/s for 1MHz, 40/s for 100kHz

  Weight – MIG-S-OS1

28kg, 62 pounds

  Dimensions – MIG-OS-OS1

45x57x38cm, 17x22x15 inches

  Burst Duration

1  up to 99 s ± 10%

  Repetition rate maximum

400/s for 1MHz, 40/s for 100kHz

Weight – MIG-S-OS1

28kg, 62 pounds

Included with Rental of Damped Oscillatory System

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping.

 

MIG-OS-OS1

    • MIG Unit
    • Power Cord
    • MIG Aux Keeper
    • USB Stick with Software & Manual
    • Printed Manual
    • Calibration Documentation 
    • 25 Pin to 9 Pin 
    • 9 Pin serial to USB Cable
    • Case 

 

Widely Used Standards

This list is a more comprehensive list of all the standards covered with this automotive load dump generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.

 

  • IEC 60255-4
  • IEC 6055-22-1
  • IEC 61000-4-10
  • IEC 61000-4-18
  • IEC 60834-1
  • VDE 435 Teil 303
  •  ANSI/IEEE C37.90.1

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems