Teseq CBA 400M-260 - Rent 260 Watt 10 kHz - 400 Mhz Amplifier

Teseq 260 Watt Power Amplifier:

  • Frequency 10 kHz - 400 MHz 260 Watts (210W P1dB)
  • Ideal for Bulk Current Injection (BCI) Testing
  • Class A Linear & Low Distortion Design 
  • Easily Integrated with Teseq NSG 4070 System 
  • High Power for ISO 11452-4 & MIL-STD-461 CS114

Options/Equipment


Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

RF & BCI Equipment

Description

Overview

Designed specifically for automotive, military and aerospace BCI and other susceptibility EMC testing,this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this type of testing.

The GaAs Class A push pull design ensures a high reliability, low distortion linear performance across the frequency range. This design also ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output.

The unit is powered from a switched mode power supply for high efficiency, high power factor and wide voltage range operation. The unit is air-cooled with integral fans, and is protected against faulty cooling by excess temperature sensing. For added flexibility, two safety interlock BNC connectors are provided on the rear panel which allows either short circuit or open circuit to mute the output from the amplifier. Front panel indicators are provided to indicate over-temperature and rf interlock operation.

Data SheetUser Manual

Specifications

Common Standards

EN/IEC 61000-4-6, MIL-STD-461, ISO 11452, DO-160

Frequency Range

10 kHz to 400 MHz

Psat (min)

260 W

P1dB (min.)

210 W
Small Signal Gain

54 dB

Gain Variation (max) ±

+/- 3.0 dB

Harmonics @ P1dB

-20 dBc
Spurious (min.)

-70 dBc

Modulation Formats

AM, FM, Pulse

Maximum Input Power (no damage)

10 dBm

Output VSWR Tolerance

Infinite any phase (no foldback
Output Impedance

50 Ohm

Input VSWR

2:1 (max)

Output VSWR

2:1 (typical)

Standards

Widely Used Standards 

 

  • IEC/EN 61000-4-6
  • CISPR 24
  • EN 61000-6-1
  • EN 61000-6-2
  • IEC 60533
  • IEC 60601-1-2
  • IEC 61326
  • MIL STD 461
  • RTCA/DO 160
  • ISO 11452-3
  • ISO 11452-4
  • ISO 11452-5
  • SAE J1113-4
  • SAE J1113-24

CBA 400M Series/Options

Models/Options Watts
CBA 400M-110  110 Watts
CBA 400M-260 260 Watts
341-745 Bench Model with front panel Mounted input/output connectors
341-845 Rack mountable with front panel Mounted input/output connectors
341-945 Rack mountable with rear Panel Mounted input/output connectors

 

You may also like

Recently viewed