Up to 4 Free Days of Transit Time
Two transit days each way are excluded from rental period
Teseq MD 4070A
Rent 400 MHz Current Monitoring Probe
In Stock & Ready To Ship
Orders by 3pm ship today
Features
- Frequency 4 kHz - 400 MHz
- Includes PCJ 8201B Calibration Fixture
- Suitable for BCI Testing to ISO & MIL-STD
- Window Diameter 23 mm
- Current ISO 17025 Accredited Calibration
Description
The monitoring device MD 4070A can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly. The MD 4070A allows fast and easy measurement as it can be quickly clamped around the current carrying conductor.
The MD 4070A is characterized over the frequency range from 4 kHz to 400 MHz. The MD 4070A can be used for the procedure for clamp injection when the common-mode impedance requirements cannot be met given in chapter 7.4 of IEC/EN 61000-4-6 „Immunity to conducted disturbances, induced by radio frequency fields”. The MD 4070 can also be used as current monitor for BCI testing as per ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 CS114 (including version “G“) and various automotive standards
- Technical Specifications Passive Mode
- Frequency range:
- 4 kHz to 400 MHz
- Transmission S21:
- typical -22 dB +/-3 dB (50 Ohm system, 100 kHz to 230 MHz)
- Signal output:
- BNC socke
- Max. signal current
- 1 Amp
- Technical Specifications Active Mode
- Frequency range:
- 4 kHz to 400 MHz
- Transmission S21:
- typical +10 dB +/-3 dB (50 Ohm system, 100 kHz to 100 MHz)
- Max. signal current (linear):
- 30 mA
- 1 dB compression point (output):
- Greater than 27 dBm
- Supply voltage:
- 12 V
- Supply current:
- approx. 0.6 A
- DC-connector:
- ODU-female 2 pins, plus on all inner conductors
- Technical Specifications Remote Mode
- Level:
- TTL up to 12 V (high = active, low = passive)
- Switch:
- passive (LED green)
- DC-connector:
- ODU-female 3 pins, plus on all inner conductors
- Cable LE 242
- Purpose:
- Connection to NSG 4070 user port, pin 9
- Connectors:
- D-Sub 15 pins male, ODU-male 3 pins, plus on all inner conductors
- Length:
- approx. 1.5 m
- Mechanical Specifications
- Size (W x H x D):
- 113 x 98 x 59 mm
- Free cable diameter:
- 23 mm
- Weight:
- approx. 830 g
- Specification of the power supply unit PSU 6001
- Country code for mains connector:
- Input:
- 100 to 240 V, 47 to 63 Hz, 400 mA
- Output:
- 12 V DC, 1.25 A
- DC-connector:
- ODU-male, 2 pins, plus on inner conductors
- Cable length:
- approx. 2 m
- Weight:
- approx. 220 g
Product Videos
Video Library
Video Guides
Related Conducted RF Equipment
Compare conducted RF immunity test systems and injection equipment available for rent. Explore amplifiers, CDNs, clamps, and accessories based on frequency range, power, application, and test requirements.
info@transientspecialists.com