VDS 200N Rental - EM Test Automotive Power Supply 15Amps

RENTAL

VDS 200N Rental - EM Test Automotive Power Supply 15Amps

Automotive Battery Supply Generator Features 

      • DC Power Supply Dips/Int - ISO 7637: 2b & 4
      • Laptop & ISO 17025 Calibration Included
      • 15 amp & 30 Amp modules available for delivery!
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Low Output Impedance & Easily Integrated Into Setup
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N series of automotive batter supply/voltage drop simulator provides testing capabilities for a variety of standards including ISO 7637. This series provides provides a diverse set waveforms recommended by both international and manufacturer standards. We offer rentals of both the 15amp (VDS 200N15) and 30amp (VDS 200N30) test solutions which can be used independently or integrated into an EM Test 200 series automotive immunity setup. This piece of test equipment comes with an ISO 17025 accredited calibration and a latop with software installed, providing a quick solution.

The Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. The EM Test iso.control software provides fast control of all test parameters providing and efficient and effective testing solution. This rental equipment comes will all required cords and software required to complete testing. An additional test system the VDS 200N30 with 30 amps is available for rent as well.

This automotive waveform generator can easily be integrated with the UCS200N and the LD200N automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides current up to 200A (peak up to 1,000A) with low output impedance. This EM Test immunity generator provides unique testing capabilities and easy to use interface, making it ideal for a variety of automotive immunity testing needs.

VDS 200N Accessories/Associated Products

Automotive Battery Supply Generator Features 

      • DC Power Supply Dips/Int - ISO 7637: 2b & 4
      • Laptop & ISO 17025 Calibration Included
      • 15 amp & 30 Amp modules available for delivery!
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Low Output Impedance & Easily Integrated Into Setup
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N series of automotive batter supply/voltage drop simulator provides testing capabilities for a variety of standards including ISO 7637. This series provides provides a diverse set waveforms recommended by both international and manufacturer standards. We offer rentals of both the 15amp (VDS 200N15) and 30amp (VDS 200N30) test solutions which can be used independently or integrated into an EM Test 200 series automotive immunity setup. This piece of test equipment comes with an ISO 17025 accredited calibration and a latop with software installed, providing a quick solution.

The Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. The EM Test iso.control software provides fast control of all test parameters providing and efficient and effective testing solution. This rental equipment comes will all required cords and software required to complete testing. An additional test system the VDS 200N30 with 30 amps is available for rent as well.

This automotive waveform generator can easily be integrated with the UCS200N and the LD200N automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides current up to 200A (peak up to 1,000A) with low output impedance. This EM Test immunity generator provides unique testing capabilities and easy to use interface, making it ideal for a variety of automotive immunity testing needs.

Data SheetUser ManualRemote Control Manual

Common Standards

ISO 7637-2 pulses 2b and 4, ISO 16750, GMW3172 and many others

Output Voltage

0V – 60V

Output Current

0A – 15A, continuous


Peak Current

15A

Frequency Range

DC to 100kHz

Supply Voltage

115/230V

Weight

49kg (108.02lbs)

Dimensions

19”/6HU

Included with Rental

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. The laptop that comes with the battery supply generator also come with ISO control software allowing for a quick, turnkey solution.

 

VDS 200N

    • Battery Simulator/Generator  
    • Power Cable
    • USB Interface Cable
    • Printed Manual
    • Calibration Documentation 
    • Short Introduction
    • USB Drive with License & Software
    • 125V Plug
    • (2) MC Connector Cable (red & black)
    • (2) Clamps Red & Black
    • Red Shipping Case

EM Test - Automotive Conducted Immunity Generators

 

Description: This video provides an overview on the EM Test conducted immunity test system. The three major components of this automotive EMC test equipment are the LD 200N, UCS 200N, and VDS 200N. This video provides and overview of these test systems including, ISO 7637-2 waveforms covered, accessories that come with equipment, setup, connecting all equipment, and troubleshooting. It also, provides insight into how to setup the software to allow remote testing to be conducted through laptop.

 

Widely Used Standards

This list is a more comprehensive list of all the standards covered with this automotive load dump generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.

 

  • Audi (Reference vehicles)
  • BMW - (Airbag ECU)
  • BMW 600 13.0 (Part 1)
  • BMW 600 13.0 (Part 2)
  • BMW GS 95002 (1999)
  • BMW GS 95002 (2001)
  • BMW GS 95003-2
  • BMW GS 95024-2-1
  • Case New Holland ENS0310
  • Chrysler CS-11809 (2009)
  • Chrysler CS-11979
  • Chrysler PF-9326
  • Cummins 14269 (982022-026)
  • DaimlerChrysler DC-10615
  • DaimlerChrysler DC-10842
  • DaimlerChrysler PF-10541
  • DIN 72300-2
  • EN 300329
  • EN 300340
  • EN 300342-1
  • EN 301489-1
  • EN 301489-17
  • EN 301489-24
  • EN 301489-7
  • FAW Diesel ECU MY06.0 (Rev.7)
  • Fiat 9.90110
  • Ford EMC-CS-2009.1
  • Ford ES-XW7T-1A278-AB
  • Ford ES-XW7T-1A278-AC
  • Ford WDR 00.00EA
  • Freightliner 49-00085
  • GM 9105P
  • GMW 3097
  • GMW 3097 (2001)
  • GMW 3097 (2004)
  • GMW 3097 (2006)
  • GMW 3100
  • GMW 3100 (2001)
  • GMW 3172
  • GOST 28751-90
  • Honda 3982Z-SDA-0030
  • Hyundai/Kia ES 95400-10, Rev. D
  • Hyundai/Kia ES 96100-02 (2006)
  • Hyundai/Kia ES 96200-00
  • Hyundai ES 39110-00
  • ISO 21848:2005
  • ISO 14982
  • ISO 16750-2
  • ISO 7637-1:1990
  • ISO 7637-2:1990
  • ISO 7637-2:2004
  • ISO 7637-2:2011
  • Iveco 16-2103 Rev.15 (2010)
  • Jaguar CI 265
  • Jaguar EMC-CS-2010JLR V1.1 (2011-01)
  • JASO D001-94
  • John Deere JDQ 53.3
  • Kia/Hyundai ES 95400-10
  • Mack Trucks 606GS15
  • MAN 3285
  • Mazda MES PW 67600
  • MBN 10284-2
  • MBN 10615
  • MBN 22100-2
  • MBN LV 124-1
  • A 211 000 42 99
  • AV EMV
  • Mitsubishi ES-X82010
  • Nissan 28400 NDS 02
  • Nissan 28400 NDS 03
  • Nissan 28401 NDS 02
  • OEM LV 124
  • Piaggio 7431 (Edizione 5, 2009-07)
  • Porsche
  • prEN 50498 (2008)
  • PSA B21 7090
  • PSA B21 7110
  • Renault 36.00.400/B
  • Renault 36.00.400/C
  • Renault 36.00.808/--D
  • Renault 36.00.808/--E
  • Renault 36.00.808/--F
  • Renault 36.00.808/--G
  • Renault 36.00.808/--H
  • Renault 36.00.808/--J
  • Renault 36.00.808/--K
  • SAE J1113-11
  • SAE J1113-11 (rev.2000)
  • SAE J1113-11 (rev.2007)
  • SAE J2628 (2007)
  • Scania TB1400
  • Scania TB1700
  • Smart DE1005B
  • Tata TST/TS/WI/257
  • Toyota TSC3500G
  • Toyota TSC3590G
  • Toyota TSC6203G
  • Toyota TSC7001G
  • Toyota TSC7006G
  • Toyota TSC7021G
  • Toyota TSC7034G
  • Toyota TSC7203G
  • Toyota TSC7306G
  • Toyota TSC7544G
  • Volvo EMC Requirements (1998)
  • Volvo EMC Requirements (2002)
  • Volvo STD 515-0003
  • VW 80000
  • VW TL 801 01
  • VW TL 801 01 (2003)
  • VW TL 820 66

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems