Home > Automotive EMC Test Equipment Rentals > EM Test UCS 200N100.2
EM Test UCS 200N100.2 - Front Side EM Test UCS 200N100.2 - Front EM Test UCS 200N100.2 - Back EM Test UCS 200N100.2 - Front Top EM Test UCS 200N100.2 - Front Side Above
EM Test UCS 200N100.2 - Front Side
EM Test UCS 200N100.2 - Front
EM Test UCS 200N100.2 - Back
EM Test UCS 200N100.2 - Front Top
EM Test UCS 200N100.2 - Front Side Above

EM Test UCS 200N100.2

Rent Transient Generator 100 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 100 Amps
  • Battery Switch & Overcurrent Protection
  • Current ISO 17025 Accredited Calibration

Included Accessories

  • Automotive EFT Generator 
  • Power Cable
  • Printed Manual
  • Calibration Documentation 
  • Software License
  • (4)Recessed Banana Jack Cords with Clips 
  • ISO.control Software on USB Stick
  • USB Cable
  • (4) MC Connectors
  • Pelican Case
Can't find something? Contact Us
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Related Equipment

In Stock
EM Test CCI - Front Side EM Test CCI - Side
EM Test CCI
Capacitive Coupling Clamp Rental
EM Test MN-CIP9136 & CIP 9136A EM Test MN-CIP9136 & CIP 9136A v2
EM Test ISO 7637-3 ICC Test System
Rental Transient Injection Kit
EM Test CA EFT Kit - Attenuators EM Test CA EFT Kit - Case & Accessories
EM Test CA EFT Kit
Rent EFT Pulse Verification Kit
EM Test UCS 200N50 - Front Side EM Test UCS 200N50 - Front
EM Test UCS 200N50
Rent Transient Generator 50 Amp CDN
In Stock
EM Test VDS 200Q10 - Front Side Stock EM Test VDS 200Q10 - Front
EM Test VDS 200Q10
Rent 10 Amp Battery Simulator

Description

The UCS 200Nx.2 Ultra-Compact-Simulator series for automotive transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling / decoupling network into one box. The UCS 200Nx.2 series is equiped to meet all international and most car manufacturer specifications from around the globe. The built-in coupling network ranges up to 200 A depending on the model and can be used and controlled by the LD 200N.

For tests beyond standard requirements the waveform parameters of the Micropulse generator can be varied in a wide range by using the so called FreeStyle mode.

Specifications:
General Specifications
Coupling network
80 VDC
Coupling network
100 A continuous
150 A @ 500 ms
Micropulse
Amplitude
20 V ... 600 V +/- 10 % (depending on pulse)
Rise time
1 ... 10 us +0/-50 % (depending on pulse)
Pulse width
50 ... 10'0000 us + /- 10 % (depending on pulse)
Internal Resistance Ri
2 ?, 4 ?, 5 ... 100 ? in 5 ? steps , 200 ?, 400 ?, 450 ? +/-20 % (depending on pulse)
Polarity
pos / neg
Repetition rate
0.2 ... 999 s +/- 20 %
Battery switch off t2
40 us ... 500 ms +/-20 % (depending on pulse)
Battery off t3
< 100 us
Burstpulse
Amplitude
25 ... 1000 V +/- 10
Rise time
5 ns +/- 30 %
Pulse width
150 ns +/- 30 %
Internal Restistance Ri
50 ? +/- 20 %
Polarity
pos / neg
Burst duration (t4)
�0.1 ... 999.9 ms
Repetition rate (t5)
1us to 10us in steps of 1 us
Pulse Duration
10 ... 9'999 ms
Frequency (f)
0.1 ... 200 kHz
Test duration
1 s ... 9'900 h
Dimensions
19 Inches /3HU
Video Guides
Introduction to UCS 200Nxx2 & ISO 7637-2
Related Videos
EM Test LD 200N Overview & Setup
EM Test VDS 200Q10 ISO 7637-2 Testing
EM Test AutoWave Waveform Generator Walkthrough
EM Test RCB 200N1 & Schwarzbeck TF 130-150 FMC 1278 RI130
Documentation