EM Test Dito - Rent & Buy 16 kV ESD Simulator

In Stock - Order By 3PM Ships Today!

EM Test ESD Simulator Features:

  • 16kV Air Discharge & 10kV Contact Discharge (10V Steps)
  • Ergonomic Design, Light Weight, & Point and Test
  • IEC 61000-4-2 ESD Simulator, 150pF/330Ω Network
  • Adjustable +/- Polarity, Various Test Routines & Standards
  • Rent & Purchase Units from Ametek ESD Distributor

Included Items, View Packing List
Got Questions?
Get technical support
Sale price$295
Request A Quote

EM Test Dito Test Accessories



Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. The dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements

Data Sheet User Manual Quick Reference Guide


Common ESD Standards

EN/IEC 61000-4-2 & ANSI C63.16

RC Network

150 pf/ 330 ohm

Voltage Range Air Discharge

500V to 16.5kV ±5%

Voltage Range Contact Mode

500V to 10kV ±5%


Positive, negative



Holding time

More than 5 seconds

Test voltage

measured, indicated in the display

Single mode

Release of single pulses

Continuous mode

Continuous discharge up to 20Hz (AD) and 10Hz (CD)

Pulse release via software

Remote control from computer via fiber optic link (USB)

CD mode

EN/IEC 61000-4-2; 150pF/330ohm

Rise time

0.8ns +/- 25%

Easy Zap

Test based on standard levels

Quick Zap

All test parameters are adjustable during test; fast and easy-to-use

Standard Test routines

As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2

Repetition Rate

Single shot mode, 1 shot/sec, 20 shots/sec AD,  10 shots/sec CD


Yes, preprogrammed test routines included

Remote Control

Via USB fiber optic link

Battery Recharge Time

ACCU battery Less than 1.5 hours

Useable During Recharge



940 grams, 2.1 pounds


33x13x8cm, 13x5x3 inches

All Accessories

Additional Testing Accessories Dito ESD Simulator:

INA/ITEM # Description

Dito Battery 

DM1-RFCI Fast Relay Discharge module with 150pF/330ohm; Rise time 200ps - 300ps

Dito Battery Charger


ESD.controlSoftware for dieo, ESD 30N with optolink cable


Discharge module 150pF/2,000ohm


Discharge module 330pF/2,000ohm


Discharge module 100pF/1,500ohm


Customer specific discharge module


Vertical coupling plane 50cm x 50cm, incl. EAS 30 grounding set 2x470kohm

EAS 30

Grounding set 2x470kohm


Power mains adaptor



General ESD Testing Accessories:

INA/ITEM # Description
MD 102 MD 102A Calibration target as per IEC 61000-4-2 with 2ohm for calibration/verification 
INA 414-2M Bleeder resistor cable (2x470 kOhms) - Length 2 meters
INA 414

Bleeder resistor cable (2x470 kOhms) - Length 80 cm

INA 102A 50 Ohm Calibration adapter for MD 102
INA 417B Opto-link to a PC with 10 m opto-cable


Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

You may also like

Recently viewed