Solar 2854-1 - Rent MIL-STD-461 CS106 Spike Generator

In Stock - Order By 3PM Ships Today!

600V Spike Generator:

  • Output levels 10V - 400V into 5 Ω
  • MIL-STD-461 CS106 Pulse Compliant
  • Adjustable Pulse Position on AC lines
  • Series injection Winding 25Amp Max Current
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote



The Solar Model 2854-1 Transient Generator is designed for screen room use in making conducted transient susceptibility tests as specified in MIL-STD-461F, Test Method CS106.


The Model 2854-1 provides 5 μS ±22% pulse with a 1.5 μS ± 0.5 μS rise time across a 5.0 Ω non-inductive resistor. Voltage is adjustable to greater than 400 V. The undershoot is limited to less than 120 V peak (maximum) and less than 20 μS. The repetition rate is variable and can be adjusted from 0.8 pulse per second to 10 pulse per second. Single transients can be applied with the pushbutton on the front panel.

Two sets of output terminals allow either parallel or series injection into the power line. The series injection may be used on DC and AC lines. Parallel injection should be used on DC lines only. The output winding used for series injection can carry 25 A of power current. The output terminals are isolated from the chassis and the power cord.

Data Sheet


Common Standards

MIL-STD-461 CS106

Spike Amplitude

10 volts to over 400 peak

Repetition Time

0.8 to 10 p.p.s.

Wave Shape

Ringing characteristic as shown in figure CS106-1 MIL- STD – 461

Rise time

1.5 ± 0.5 µS into 5 Ω


Output falls to zero in 5µS ± 22%

Phase Adjustment

Pulse position adjustable from 0° to 360° periodically on 50, 60 or 400 Hz sine wave

Internal Impedance

Less than 2.0 Ω


11.3kg, 25 pounds


48cm x 18cm  x 32cm (19” x 7” x  12.75” )

You may also like

Recently viewed