Up to 4 Free Days of Transit Time
Two transit days each way are excluded from rental period
EM Test VDS 200Q10
Rent 10 Amp Battery Simulator
In Stock & Ready To Ship
Orders by 3pm ship today
Features
- -60 to +60 Volts 10 Amps Continuous
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Four Quadrant, Bipolar Amplifier
- iso.control Software Included
- Current ISO 17025 Accredited Calibration
- VDS 200Q10.1-120
- Printed Manual
- Power Cord 120V
- Calibration Certificates
- Laminated Packing List
- D shape 15 pin gray cable Frame Bus in to out
- Interlock termination
- 2 PCS red and black recessed banana cables
- Laptop with Charger
- USB cord
- USB stick with manuals
- Shipping case
Can't find something? Contact Us
Description
The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the VDS 200Q series as there is a large variety of requirements. Secondly, the VDS 200Q series serve as powerful DC voltage supplies for the DUT during the tests with automotive transients. The VDS 200Q series covers all three supply voltage categories (48 V, 24 V and 12 V). Their current capability ranges up to 100 A or more depending on the model and your application.
- Specifications:
- Output Voltage
- 0V - 60V
- Output Current
- 0A -15A, continuous
- Peak Current
- 15A
- Frequency Range
- DC to 100kHz
- Supply Voltage
- 115/230V
- Weight
- 49kg (108.02lbs)
- Dimensions
- 19 Inch/6HU
- COMMON DATA (ALL MODELS)
- Ripple voltage
- Ur <0.2Vp-p, frequency min. 400Hz
- Source impedance
- Zi = <10mohm
- Sinusoidal signal capability vs. Frequency *)
- Vpp max. 16V up to 20kHz Vpp max. 10V up to 30kHz Vpp max. 6V up to 50kHz
- Vpp max. 3V up to 100kHz via Analog In, controlled by AutoWave/AMP 200Nx only
- VDS 200N30.1 and VDS 200N50.1: Vpp max. 65V resp. 35V up to 50kHz with respect to the selected voltage range Vpp max. 3V up to 100kHz via Analog In, controlled by AutoWave/AMP 200Nx only
- Fuses
- Depending on VDS 200N model
- TRIGGER
- Automatic
- Automatic release of the events
- Manual
- Manual release of a single pulse
- External
- External release of a single pulse
- OUTPUT
- DUT Supply +/-
- Safety laboratory or high current connectors
- Ext. trigger
- 5-15V TTL; BNC connector
- CRO Trigger
- 5V TTL-signal for oscilloscope
- TEST ROUTINES FOR ARBITRARY WAVES
- DC source
- Max. 60V; current depending on VDS 200N model
- Functions
- Sine Wave Sweep
- Sine Wave (Cranking)
- Clipped Load Dump
- Jump Start
- Extern
- GM 9105P Pulse 4
- Drop and Jump pulse
- Standard Test routines
- ISO 7637, Pulses 2b and 4 ISO 16750-2 Jaso Test 1
- Service
- Service, Setup, Self test
- INTERFACE
- Serial interfaxe
- USB
- Parallel interface
- IEEE 488, addresses 1 - 30
- Remote control
- To connect an external signal generator (10kohm): 0-10V / 0-50kHz max. 0.5V(p-p) / 0-100kHz
Product Videos
Video Library
Video Guides
Related Videos
Related Automotive Test Equipment
Compare automotive transient test systems, battery simulators, and related equipment available for rent. Explore systems based on voltage and current range, pulse capability, application, and automotive test requirements.
info@transientspecialists.com