Description
Overview
The ESD3000 with the DM1 (Discharge Module 50pF/330Ω Network) by EMC Partner is cordless, battery powered, ESD Gun for air discharge testing to 16kV and 10kV contact discharge testing designed for IEC 61000-4-2. Buy it used and rent it with a diverse set of discharge modules/discharge networks which are easily interchanged depending upon testing needs.
The design of the interface for this ESD Test Equipment offers the user a quick way to change test parameters with one hand. EMC Partner software comes with the equipment allowing for remote control and reports to be generated. It can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.
The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack, which are provided with the rental. Electronic polarity reversal, including alternating polarity, is provided with this ESD simulator. This tester offers an easy to use solution for EN IEC 61000-4-2, ANSI C63.16 and many others electrostatic discharge related standards.
Data Sheet User ManualSpecifications
Common ESD Standards | EN IEC 61000-4-2 & ANSI C63.16 |
Voltage Range Air Discharge | +/- 0.2kV to 16kV |
Voltage Range Contact Mode | +/- 0.2kV to 10kV |
RC Network | 150 pf/ 330 ohm |
Resolution | 100V |
Construction | fully portable, no additional basic unit |
Control | LCD and 6 menu buttons, 1 trigger button |
Maximum voltage | 16 kV or 30 kV, depending on modules chosen |
Discharge polarity | positive, negative, alternating |
Discharge modes | contact discharge (CD) and air discharge (AD) |
Discharge frequency CD | max. 20 Hz, (pulse every 0.05, 0.1, 0.2 … 99 s) |
Discharge frequency AD | ≥ 30 Hz or more, for ex. with DM1, DN1, other |
Counter | pre-selectable, 1 to 29999 |
Discharge detection | selectable, count pulses or count discharges |
Holding time | ≥ 5 s |
Trigger | manual, automatic, remote |
Ramps | voltage, polarity |
Reporting with TEMA | automatic report sequence, amplitude, polarity |
Power supply | 10 x AA rechargeable batteries or mains |
Weight equipped | 1050 g, with battery pack, DM1 and AD tip |
Requires | at least a DM module, or a DN module + RM32 |
Repetition Rate | Single shot mode, variable 0.05 to 30s |
Remote Control | Yes – D-sub |
Programmable | Voltage ramping and polarity |
Battery Recharge Time | Time 10 x UM-3/AA batteries |
Usable During Recharge | Yes |
Weight | 870 grams, 1.9 pounds |
Dimensions | 33×7.6×7.6 cm, 16x3x3 inches |
Rent/Buy Modules
ESD 3000 Rental ModuTesting Accessories ESD Simulator:
Item # | Description |
RM32 |
RM 32 Relay module required for 30kV testing |
DN1 |
IEC 61000-4-2 to 30kv, requires RM32 - 150 pf/330 ohms |
ISO TR10605 to 30kv, requires RM32 - 330 pf/2K ohms |
|
DN3 |
ISO TR10605 to 30kv, requires RM32 - 150 pf/2K ohms |
DN6 |
VW & Chrysler to 30kv, requires RM32 - 330 pf/330 ohms |
DM4 |
Network for Mil-Std 464, Mil std-883, GR78 - 100 pf/1500 ohms |
Video
Transient Specialists: ESD Simulator Comparison
Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions
features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD
testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,
modifying testing parameters, used market considerations, and others.
HV Technologies: ESD Tester Demonstration
Description: This overview video, by HV Technologies, describes how to use the ESD3000 ESD Gun. It walks through
how you will receive the test equipment, including accessories, then how to manipulate testing parameters with
the touch screen. Finally, it shows how to change or add different networks or test accessories to the simulator.