IEC 61000-4-3 - Radiated Immunity 80MHz-6GHz
DC-1GHz Amplifiers
Low Frequency Equipment
1GHz-6GHz Amplifier
Rental Equipment-v1580762725793.jpg?500x404 "1GHz-6GHz Amplifier")
RF Systems (Generators)
Current Injection/EM Clamps
All Radiated Equipment
10kHz-18GHz frequency
Antenna Rentals
Biconical, Log Periodic, & Horn
- 80 MHz - 1 GHz 250 Watts Psat (min)
- 200 Watts Power P1dB (min)
- Class A Broadband Amplifier
- 1 GHz - 6 GHz 60 Watts Psat (min)
- 50 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- 700 MHz - 6 GHz 60 Watts Psat (min)
- 50 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- Frequency Range 20 MHz - 18 GHz
- Field Strength 2 - 1000 V/m CW, AM & Pulse
- Automotive, Military, & Commercial Field Measurements
- Frequency Range 20 MHz - 9.3 GHz
- Field Strength .5 - 800 V/m CW, AM & Pulse
- Automotive, Military, & Commercial Field Measurements
- 4 kHz - 400 MHz RF Amplifier
- 100 Watts Power P1dB (min)
- Intuitive Front Panel Display
- CW & Analog Modulated Signal Generator
- Maximum Output Power +12 dBm
- AM, FM, and ΦM Modulations
Description
Overview
General Testing Information
This standard provides two different frequency ranges associated with radiated testing. The first, normally testing to completely, covers 80MHz to 1 GHz, and the second covers 800MHz to 960MHz and 1.4GHz to 6GHz. The second two frequencies are tested to based upon the EUT anticipated interference. This higher frequency range has increased in importance as the usage of the higher bands becomes more common. These frequency ranges are tested using field uniformity to ensure compliance to associated volt meter requirement. The radiated requirements of level 4 extend to 30V/m with additional testing possible at higher levels as required. The below table is extracted from InCompliance "Antenna Selection for IEC 61000-4-3".
- EUT Measurement Instrumentation
- Field Generating Equipment
- Field Generating Antenna
- 8 meter Higher Support
- Uniform Field Measuring Devices (Probe)
- Fiber Optic Cable or Signal Link
- Chamber to conduct testing
- Optional anechoic material in case of semi-anechoic chamber
