IEC 61000-4-3 - Radiated Immunity 80MHz-6GHz
DC-1GHz Amplifiers
Low Frequency Equipment
1GHz-6GHz Amplifier
Rental Equipment-v1580762725793.jpg?500x404 "1GHz-6GHz Amplifier")
RF Systems (Generators)
Current Injection/EM Clamps
All Radiated Equipment
10kHz-18GHz frequency
Antenna Rentals
Biconical, Log Periodic, & Horn
- 800 MHz - 6 GHz 250 Watts Psat (min)
- 200 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- 800 MHz - 6 GHz 60 Watts Psat (min)
- 50 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- 80 MHz - 1 GHz 300 Watts Psat (min)
- 250 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
- 80 MHz - 1 GHz 150 Watts Psat (min)
- 125 Watts Power P1dB (min)
- Class A Operation & Front Panel Display
Sale price
Buy Used -
$13,000
- 10 kHz - 400 MHz 110 Watts Psat (min)
- 80 Watts Power P1dB (min)
- Class A Operation & Ethernet Control
- Rugged Maple Wood Adjustable Tripod
- Standard 1/4-20 Mounting Thread
- Reversible Legs: Rubber Feet & Spike Tips
- Single-Channel 5 MHz Video Bandwidth
- Rented with E9300B 18GHz Average Sensor
- Ideal for CW Power Level Verifications
- Frequency Range 30 MHz to 6 GHz
- Ideal for Sweeping Across Frequency Range
- Average 2:1 VSWR Above 50 MHz
- Frequency Range 100 kHz - 6 GHz
- Field Strength 0.5 - 800 V/m
- Suitable for IEC 61000-4-3 Field Verification
- Designed for EMF Measurements to 60 GHz
- Provides X, Y, Z and Total Field Data via Screen
- SMP2 Software, Fiberoptic Cable, & Laptop Included
- Magnetic Field Measurement (H Field) Probe
- DC to 40kHz Continuous Frequency Range
- Static and Time-variable Field Measurements
- Magnetic & Electric Field Measurement Probe
- H-Field & E-Field Frequency 1 Hz- 400 kHz
- Max Range 100 kV/m & 10 mT; Noise (< 4 mV/m)
- Electric Field Probe 300 kHz - 18 GHz
- High Sensitivity from for 0.5V/m Measurements
- Max 250 V/m CW & 30 V/m RMS Fields
- Frequency Range 1 GHz to 8 GHz
- Ideal for Emissions Pre-Compliance to CISPR 16
- Antenna Factor from 24 to 43 dB/m Over Range
- Frequency Range 2 MHz to 6 GHz
- Often used with EMC Near Field Probes
- Input: 50 Ohm, SMA; Output: 50 Ohm, SMA
- 10 kHz - 400 MHz 260 Watts Psat (min)
- 210 Watts Power P1dB (min)
- Class A Operation & Ethernet Control
Description
IEC 61000-4-3 Part 4-3 Testing and measurement techniques –Radiated, radio-frequency, electromagnetic field immunity test
Overview
General Testing Information
This standard provides two different frequency ranges associated with radiated testing. The first, normally testing to completely, covers 80MHz to 1 GHz, and the second covers 800MHz to 960MHz and 1.4GHz to 6GHz. The second two frequencies are tested to based upon the EUT anticipated interference. This higher frequency range has increased in importance as the usage of the higher bands becomes more common. These frequency ranges are tested using field uniformity to ensure compliance to associated volt meter requirement. The radiated requirements of level 4 extend to 30V/m with additional testing possible at higher levels as required. The below table is extracted from InCompliance "Antenna Selection for IEC 61000-4-3".
- EUT Measurement Instrumentation
- Field Generating Equipment
- Field Generating Antenna
- 8 meter Higher Support
- Uniform Field Measuring Devices (Probe)
- Fiber Optic Cable or Signal Link
- Chamber to conduct testing
- Optional anechoic material in case of semi-anechoic chamber
