EMC Partner IMU-MGS - Front Side
EMC Partner IMU-MGS - Front
IMU-MGS Rental System Overview
EMC Partner IMU-MGS - Back
EMC Partner IMU-MGS - Front Above

EMC Partner IMU-MGS

Rent 4 kV Surge & EFT Generator
  • 4.1 kV Surge & 4.4 kV EFT/Burst Generator 
  • Built-in CDN Max 300 Volts 16 Amps AC & DC
  • Model: IMU-MGS F4-S4-P
  • Includes Laptop with TEMA3000 Software 
  • Current ISO 17025 Accredited Calibration

Included Accessories

  • Conducted Immunity System
  • Control Software on USB 
  • Calibration Documentation
  • Printed Manual
  • Ethernet Cable 
  • Power Cord
  • Interlock MIG
  • EFT LNPe Adapter
  • EUT Power In Cable
  • (2) U Shapped 
  • EUT out with MC connectors
  • Adapter Plug
  • 3 pcs recessed banana cables 
  • Pelican Shipping Case
Can't find something? Contact Us
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Description

Modular test system with colour touch screen and intuitive software. An integrated help with graphics guide the user through fast and efficient setup and operation. The system is used for CE mark testing in the European Union. Each system can be individually configured and easily extended. 10 modules are available for the IMU-MGS. All modules are easily added or removed by the user on-site. 

The generator can be configured for IEC / EN and also ANSI test requirements. ElectroMagnetic Compatibility (EMC) tests for Surge up to 5kV and EFT up to 5kV are freely configurable by the user. IMU-MGS is programmed with default parameters from the IEC basic standards. A test library including basic and generic requirements is also included in the IMU-MGS.

IMU-MGS Mainframe
EUT power input 1 (CDN)
max. AC/DC 300V, 16A (fused 16A) with P module
EUT power input 2 (CDN)
max. AC/DC 300V, 16A (not fused) with P module
Internal CDN freq. range
DC, 50 Hz, 60 Hz
Power freq. synchr.
50/60 Hz
Coupling Burst
L, N, PE, L+N, L+PE, N+PE, L+N+PE, direct out
Coupling Surge
2 ?: L-N, direct out, 12 ?: L-PE, N-PE
IMU-MGS Control Features
Operating system
EPOS propietary firmware
Languages
8 menu languages, selectable
User interface
7 inch capacitive touch display
Connectivity
gigabit ethernet, USB, RS485
Environment meas.
built-in temperature and humidity sensor
EUT power monitor
supply voltage, current and freq. on screen
EUT supply voltage waveform
monitoring BNC output connector max. 15 V
EUT supply current waveform
monitoring BNC output connector max. 15 V
Surge monitoring
peak voltage and current on screen, waveform available at BNC outputs
Surge voltage waveform
monitoring BNC output connector max. 15 V
Surge current waveform
monitoring BNC output connector max. 15 V
Trigger out
BNC connector, max. 6 V
Trigger in
auto, manual or via programmable BNC
Programmable connectors
2 BNC connectors (inputs/outputs) as follows
Programmable input functions
Trigger Input, Start Test, Stop Test, EUT Fail, EUT Mark, Emergency Stop
Programmable input max. voltage
low range: 0 - 1.5 V, high range: 2.3 - 24 V
Programmable output functions
Running State, Safety Circuit State
Programmable output max. U, I
max. 24 V, max. 300 mA
Synchronization source
EUT power, direct out, external
Synchronization angle
0 - 359 degree +/- 5 degrees, 1 degree step
Input EUT power selection
PWR1 and PWR2 selectable on the screen
Power ON/OFF process
sophisticated functions allow to switch EUT power ON/OFF at selectable voltage angle (0 - 359 degrees, 1 degree step)
Impulse polarity
positive, negative, alternating
Automatic ramps
test level, sync. angle, coupling path
EUT overcurrent protection
automatic programmable fuse up to 16 A
PS3 control
DC, 16.7 Hz, 50 Hz, 60 Hz supply power
Safety features (standard)
Emergency stop button on front panel red/yellow as per IEC 60947-5-5, IEC 60204-1, ISO 13850, Safety circuit
IMU-MGS module: EXT-IMU4000 F4
Standard
IEC 61000-4-4 latest edition
Output impedance
50 Ohm
Voltage OC
0.2 kV - 4.4 kV
Voltage into 50 ?
0.1 kV - 2.2 kV +/- 10 %
Waveform into 50 ?
5 +/- 1.5 ns / 50 +/- 15 ns
Voltage into 1 k?
0.191 kV - 4.18 kV +/- 20%
Waveform into 1 k?
5 +/- 1.5 ns / 50 ns (-15/+100 ns)
Spike frequency
1 kHz - 1 MHz
Maximum spikes / second
8000 @ 1 kV
Burst duration
0.01 ms - 30 ms, continuous up to 8 kHz
Burst repetition
1 - 1000 ms
Polarity
positive, negative, alternating
Synchronization
0 - 359 degrees, step 1 degree
Ramps
voltage, spike frequency, burst duration
IMU-MGS module: EXT-IMU4000 S4
Standard
IEC 61000-4-5 latest edition
Output impedance
2 ?
Voltage OC
0.25 kV - 4.1 kV +/- 10 %
Voltage waveform
1.2 us +/- 30 % / 50 us +/- 20 %
Current SC
0.125 kA - 2.05 kA +/- 10 %
Current waveform
8 us +/- 20 % / 20 us +/- 20 %
Pulse repetition
up to 1 / s @ 0.8 kV, 1 / 5 s @ 4.1 kV
Polarity
positive, negative, alternating
Synchronization
0 - 359 degrees, step 1 degree
Ramps
voltage, synchronisation angle
Magnetic pulse test
IEC 61000-4-9, see MF1000-x coils
IMU-MGS mainframe:
Operating voltage
100 - 240 V (50/60 Hz) +/- 10 %
Power consumption
ON < 150 VA, standby < 15 VA
Weight
16 kg (weight of modules not included)
W x d x h
520 x 433 x 180 mm
Version
19 inch unit, 4 UH
Video Guides
EMC Partner IMU-MGS & CN-EFT1000 Overview
EMC Partner IMU Series Generators