EMC Partner ESD3000 - Rent 16 kV ESD Simulator/Gun

EMC Partner 16kV ESD Gun:

  • 16kV Air Discharge & 10kV Contact-discharge (100V Steps)
  • Battery Powered, Durable, Capabilities with Network for 30kV
  • IEC 61000-4-2 Compliant, includes DM-1 150pF/330Ω Network
  • Many Preprogrammed Standards & Test Routines
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Included Network


Included Items, View Packing List

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Rent ESD3000 Modules & Networks

Description

Overview

AA battery operated and light weight ElectroStatic Discharge (ESD) generator. Available as 16 kV version upgradeable to 30 kV. Modular architecture with networks for household and industrial electronics, automotive, defence and avionic applications. Fully compliant to most populat standards including IEC 61000-4-2, ISO 10605, MIL-STD-461 CS118 and DO-160 section 25.

Data Sheet User Manual

Specifications 

Common ESD Standards  EN IEC 61000-4-2 & ANSI C63.16
Voltage Range Air Discharge  +/- 0.2kV to 16kV
Voltage Range Contact Mode +/- 0.2kV to 10kV
RC Network 150 pf/ 330 ohm


Resolution  100V
Construction fully portable, no additional basic unit
Control LCD and 6 menu buttons, 1 trigger button
Maximum voltage 16 kV or 30 kV, depending on modules chosen
Discharge polarity positive, negative, alternating
Discharge modes contact discharge (CD) and air discharge (AD)
Discharge frequency CD max. 20 Hz, (pulse every 0.05, 0.1, 0.2 … 99 s)
Discharge frequency AD ≥ 30 Hz or more, for ex. with DM1, DN1, other
Counter pre-selectable, 1 to 29999
Discharge detection selectable, count pulses or count discharges
Holding time ≥ 5 s
Trigger manual, automatic, remote
Ramps voltage, polarity
Reporting with TEMA automatic report sequence, amplitude, polarity
Power supply 10 x AA rechargeable batteries or mains
Weight equipped 1050 g, with battery pack, DM1 and AD tip
Requires at least a DM module, or a DN module + RM32
Repetition Rate  Single shot mode, variable 0.05 to 30s
Remote Control  Yes – D-sub
Programmable Voltage ramping and polarity
Battery Recharge Time  Time 10 x UM-3/AA batteries
Usable During Recharge  Yes
Weight 870 grams, 1.9 pounds
Dimensions 33×7.6×7.6 cm, 16x3x3 inches

Rent/Buy Modules

ESD 3000 Rental ModuTesting Accessories ESD Simulator:

Item # Description
RM32

RM 32 Relay module required for 30kV testing

DN1

IEC 61000-4-2 to 30kv, requires RM32 - 150 pf/330 ohms

DN2

ISO TR10605 to 30kv, requires RM32 - 330 pf/2K ohms

DN3

ISO TR10605 to 30kv, requires RM32 - 150 pf/2K ohms

DN6

VW & Chrysler to 30kv, requires RM32 - 330 pf/330 ohms 

DM4

Network for Mil-Std 464, Mil std-883, GR78 - 100 pf/1500 ohms

Video

Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

HV Technologies: ESD Tester Demonstration 

Description: This overview video, by HV Technologies, describes how to use the ESD3000 ESD Gun. It walks through

how you will receive the test equipment, including accessories, then how to manipulate testing parameters with

the touch screen. Finally, it shows how to change or add different networks or test accessories to the simulator.

You may also like

Recently viewed