Com-Power LI-1100C - Rent 50µH 100Amp 440VAC LISN

In Stock - Order By 3PM Ships Today!

Com-Power 50µH 100Amp LISN:

  • Frequency Range: 150 kHz to 30 MHz
  • Max Voltage: 440VAC (L to G) & 620 VDC
  • Fully Compliant with CISPR 16-1-2/ANSI C63
  • Transient Limiters & Spectrum Analyzers Available
  • Current ISO 17025 Cal & 2 Days Free Transit Time


Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Associated Rental Emissions Equipment



The LI-1100C Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. The LI-1100C is compliant with both CISPR 16-1-2 and ANSI C63.4.

The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LI-1100C includes one pair of, separately housed, single-conductor networks, to be installed in series with each current-carrying conductor in a singlephase, dual-phase or DC power system. A second LI-1100C pair can be used to accommodate 3-phase power systems (Wye or Delta configurations).

The LI-1100C is equipped with Superior Electric SUPERCON® shrouded sockets at the mains (power input) and EUT (power output) ports. The matching color-coded plugs for connection to the mains and EUT wiring are included. This LISN uses air-core inductors to prevent saturation and permeability variation. The mounting plate of the LI-1100C is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current.

Use of a Transient Limiter for impedance matching, reduction of out-of-band emissions and transient protection for your measurement instrument is highly recommended and available from ComPower. All Com-Power LISNs are individually calibrated in compliance with the relevant requirements of CISPR 16-1-2 and ANSI C63.4. Impedance, Phase, Isolation, and Insertion Loss data is supplied with each unit, along with the calibration certificate.

Data SheetUser Manual


Common Standards

CISPR 16-1-2, ANSI C63.4


50uH (air-core)

Frequency Range

150 kHz to 30 MHz

RF Connector

50Ω N-type (female)

Current Rating

100 Amperes(AC), 70 Amperes(DC)

Dimensions (each network)

10 x 10 x 21 inches /25.4 x 25.4 x 53.3 cm

Weight (each network)

17 lbs. / 7.7 kg

Insertion Loss

< 0.5 dB (150 kHz to 30 MHz)


> 40 dB (150 kHz to 30 MHz)

Fan Power Adapter

Input: 120/230 VAC 60/50Hz, Output: 6 VDC 0.5 Amperes

You may also like

Recently viewed