Home > ESD Simulator/Guns - Rent & Buy Electrostatic Discharge Equipment > Teseq NSG 437
Teseq NSG 437 Simulator Teseq NSG 437 Display
Teseq NSG 437 Simulator in Case Teseq NSG 437 Simulator and Base Station
Teseq NSG 437 Simulator
Teseq NSG 437 Display
Teseq NSG 437 Overview
Teseq NSG 437 Simulator in Case
Teseq NSG 437 Simulator and Base Station

Teseq NSG 437

Rent & Buy 30 kV ESD Simulator
In Stock - Order by 3 p.m. ships today
  • 30V Air & Contact Discharge (100V Steps)
  • Color Touch Panel Control with Activity Log
  • Includes 150 pF/ 330 Ohm Network (INA 4380)
  • Variety of different RC Discharge Networks Available
  • Rentals Include ISO 17025 Calibration with Data
Order Type

Included Accessories

  • Base Station
  • Simulator/Frame 
  • Power Supply
  • Power Cord
  • Air Discharge Tip
  • Contact Discharge Tip
  • Printed Manual
  • Calibration Documentation
  • INA 4380 150pF/330Ohms
Can't find something? Contact Us
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Related Equipment

Teseq NSG 437-Auto Front Side Simulator Teseq NSG 437-Auto - 30 kV Automotive ESD Simulator
Teseq NSG 437-Auto
30 kV Automotive ESD Simulator
In Stock
Teseq NSG 435 Side Above Teseq NSG 435 Screen
Teseq NSG 435
Rent & Buy New 16 kV ESD Simulator
Buy New $295
In Stock
Teseq NSG 438 Simulator Front Side Teseq NSG 438 Simulator screen
Teseq NSG 438
30 kV Battery Powered ESD Simulator
Weekly Rental $595
MD 102A & Cable MD 102A, Case, & Cable - Side
Teseq MD 102A
ESD Target for Waveform Verification
NSG 437 & NSG 438 Contact Discharge Tip (403-827)
Teseq TIP30 CD
NSG 437 & 438 Contact Discharge Tip
In Stock
NSG 437 & NSG 438 Air Discharge Tip (403-826)
Teseq TIP30 AD (403-826)
NSG 437/438 Air Discharge Tip

Overview

Ergonomic design and advanced functionality. The NSG 437 ESD simulator is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display.

NSG 437 comprehensively fulfills virtually all international standard requirements. Based on over 60 optional discharge networks, the NSG 437 can meet any of today’s automotive manufacturers’ standards.

The simulator is simple, convenient and safe to use. The whole range of parameter settings including polarity selection, freely adjustable pulse repetition, counter functions and discharge detection is available up to the maximum discharge voltage.

The color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings. Pre-programmed settings for IEC 61000-4-2 and ISO 10605 ensure that the simulator is automatically set up correctly and the appropriate discharge network is installed. The actual RC value is displayed at all times. Molded HV discharge networks in solid cases eliminate ionization and leakage current effects. Precisely tuned combinations of RC components guarantee wave shape parameters to be within tolerances. A unique activity log is included so that the types and numbers of ESD simulations can be easily scrolled through to check what has been tested and in what timeframe.

 The simulator is recalibrated and adjusted at every start. Additional features include freely adjustable pulse repetition rate, a special random generator function and an optional charge remover for discharging the EUT.

Parameters:
Pulse network
150 pF / 330 Ohms as per IEC 61000-4-2 and ISO 10605
Discharge voltage
Contact discharge: 200 ... 30'000 V (in 100 V steps)
Air discharge: 200 ... 30'000 V (in 100 V steps)
Charging voltage accuracy
< +/- 5 %
Frequency / repetition
0.5, 1, 5, 10, 20, 25* Hz (* only in AD mode)
Polarity
pos / neg / automatic chang
Operating modes
single / continuous
Counter
1 ... 9'999
Holding time
> 5 s (charging voltage +/- 5 %)
Discharge detection
Yes, AD only. Indication display / acoustically
Auto-shut-off
After 15 minutes idle time (w/o loss of test parameters)
Discharge tips
exchangable, ball and point as per IEC 61000-4-2
Display
Color touch screen
Power mains (base station)
100 ... 250 VAC 60 / 60 Hz
Weight
Discharge pistol (w/o cable): approx. 1.2 kg
Base station : approx. 5.7 kg
Ambient conditions (operation)
5 ... +40 C / 20 ... 80 % humidity (non condensing) / 68 ... 106 kPA
Sets:
NSG 437-xxx
ESD simulator incl. power mains supply adapter & power cord
150 pF / 330 ? discharge module
Contact- and air discharge tip
Ground return cable
NSG 437-AUTO-xxx
ESD simulator incl. power mains supply adapter & power cord
150 pF / 330 Ohm discharge module
150 pF / 2000 Ohm discharge module
330 pF / 330 Ohm discharge module
330 pF / 2000 Ohm discharge module
Contact- and air discharge tip
Ground return cable
Additional Accessories:
INA 4421
Tripod support for NSG 437 / NSG 438
INA 4423
Carry case for NSG 437 / NSG 438
TIP30 AD
30 kV Air Discharge Tip
TIP30 CD
30 kV Contact Discharge Tip
TIP30 CD FAST
Fast rise tip, approx. 0.4 ns
TIP30 FLEX SET
Set of flexible tips when DUT access is difficult
VCP
Vertical Coupling Plane
EAS 30-x
Grounding set 2x 470 kOhm, 0.8 m / 1.5 m / 2 m cable length
MD 102A
Calibration target as per IEC 61000-4-2
INA 102A
50 Ohm calibration adapter for MD 102A
INA 4381
150 pF / 2000 Ohm discharge module
INA 4382
330 pF / 2000 Ohm discharge module
INA 4553
330 pF / 330 Ohm discharge module
Special discharge networks
Ask our sales team for availability
Video Guides
Teseq NSG 437 Simulator Overview
NSG 435 / NSG 437 / NSG 438 up to 30 kV
Related Videos
Teseq NSG 438 (A Auto) ESD Simulator Overview
Documentation

Components & Modules

The NSG 437 simulator is modularly constructed from a number of discrete
function units.

  • Base station - Mains connection required, contains the high voltage generator module
  • Pistol - Houses interchangeable discharge network, high voltage relay,
    the exchangeable test finger, electronics and the touch sensitive input/display
    panel
  • Discharge Tip - Interchangeable discharge tip section for either air or contact discharge tips
  • Display - Touch screen allows for selection of testing parameters
  • Discharge Network - Latch open section on the pistol that allows for switching of discharge networks to meet a variety of testing requirements

Simplified Test Setup

Test standards such as the IEC/EN 61000-4-2, Ed. 1.2:2001 give detailed information about setting up a test rig, the organization of a test and the documentation.
The test engineer cannot be relieved of the duty to study the applicable test prescriptions closely and to adapt the conditions to the test object in question. The necessary documents can be obtained directly from the IEC, ANSI, IEEE, etc. or they can be obtained through the relevant national standards bureau.

The contact-discharge method is to be used in preference to the air-discharge method. The former must, however, be implemented in such a way that there is a true metal-to-metal contact with the EUT.
Repetitive discharges can really be used only to localize weak spots or to find sensitive conditions in program sequences quickly. Single pulses then have to be used for a detailed investigation and assessment of the interference sensitivity.

An electrostatic discharge always exhibits high frequency properties with parts of the spectrum extending to well beyond 1 GHz. Screening and filtering measures must therefore also be effective up into these frequency ranges.
The test conditions must always be documented exactly including photos of the test rig, information about the type and number of discharges, details of the prevailing climatic conditions, comments regarding the effects observed, etc.