Voltage Dip Test Equipment Rentals
Voltage Dip Test Equipment Rentals
Voltage dip generators provide the necessary capabilities to simulate voltage dips, short interruptions, and voltage variations in equipment connected to low-voltage power supply lines. The most common standard when testing for voltage dips and interruptions is EN IEC 61000-4-11. Voltage dips and short interruptions are caused by faults in the network, primarily short circuits, in installations or by sudden large changes of load. In certain cases, two or more consecutive dips or interruptions may occur. Voltage variations are caused by continuously varying loads connected to the network against a certain benchmark. Below you will find an example waveform of both dips and interruptions per EN IEC 61000-4-11.Voltage Dip & Interruptions per EN IEC 61000-4-11 waveform
We rent voltage dip, interruptions, and variations immunity generators that offer testing to meet EN IEC 61000-4-11 and many other standards. Our Immunity test equipment rentals come with A2LA calibration & free technical support. We offer rental products by TeseqEMC PartnerEM Test, and Thermo-Keytek. We also provide a variety of rental accessories for our equipment allowing customers to meet a variety of requirements. Dips & Interrupts Rental Products Picture

Generator Voltage Dip Rentals | EMI Test Equipment Rentals

Showing 1 to 9 of 16 products

RENTAL

Profline 2105-208 Rental - Teseq 5KVA Harmonics and Flicker Test Set incl. NSG 1007 per EN IEC 61000-3-2

The Teseq Profline2105 by Teseq has a stable and programmable 5KVA power supply and line conditioner (Cal Inst 5000ix) used for measuring single phase harmonics (EN IEC 61000-3-2) and flicker (EN IEC 61000-3-3) testing. The NSG1007 power supply is included in the Profline2105 rental. An A2LA accredited calibration is included in the EMC rental equipment price. 

This Harmonics and Flicker Emissions Tester has a fully programmable AC power source with arbitrary waveform generator capable of being used in stand-alone mode in various applications for IEC 61000-4-X at pre or full-compliance. The measurement of flicker requires a fixed, stable source impedance the Profline system provides a precision power source to accurately simulate this impedance by careful control of the relationship between voltage and current. This IEC 61000-3-3 rental solution eliminates the need for a costly physical impedance.

The Profline 2105 is a reliable solution for testing to standards EN IEC 61000-3-2EN  IEC 61000-3-3EN IEC 61000-4-11EN IEC 61000-4-13, and EN IEC 61000-4-14. Measurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels are used to make simultaneous measurement of both current and voltage. 

RENTAL

A NSG 3060 Rental - Teseq Surge 6.6kV, Ringwave 6.6kV, & EFT 4.8kV Generator

The Teseq NSG 3060 EMC Immunity generator provides EFT to 4.8kV, Surge to 6.6kV, 100 kHz Ringwave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards.

The NSG3060 offers a user friendly design to help streamline testing to EN IEC 61000-4-4EN IEC 61000-4-5, EN 61000-4-12,ANSI C62.41, C62.45, and UL 1449.  It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel.  Expansion capabilities enable the system to be configured for a much broader range of applications including 10/700 Telecom Surge and Magnetic Field tests.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies the EMC test standard allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG 3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

NSG 3040 Rental - EFT 4.4kV, Surge 4.8kV Built-In Coupler

The Teseq NSG 3040 electromagnetic immunity (EMI) test generator provides 4.4kV Surge and 4.4kV EFT with a built-in single phase coupler and is designed primarily for cable-borne transient interference tests. A2LA accredited calibration is included in the EMC rental equipment price. This Teseq products modular architecture and industry standard interfaces allow it to be easily expanded and customized to meet individual testing needs.

This Immunity Test Generator is designed to fulfill conducted EMC testing requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). The NSG3040 includes a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This EMC test equipment can also be controlled via PC through the Ethernet Port.

The NSG 3040 system is an all in one box that tests to EN IEC 61000-4-4EN IEC 61000-4-5 and EN IEC 61000-4-11 and CE Mark with optional INA 6502. Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests. This equipment allows easy modification for the requirements of new standards, and new function units for new parameters may be incorporated in existing systems.

RENTAL

TRA3000 C Rental - Common Mode Generator - IEC 61000-4-16

The EMC Partner TRA3000 C  Rental is an EMI test generator is an all in one unit testing solution for both the long/short tests. This EMC Partner product includes single phase CDN for EN IEC 61000-4-16 and external box for the 300 volt short test. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The TRA 3000C includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The TRA3000C is a single unit testing system for EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11CE Mark, and EN IEC 61000-4-16. This product offers many solutions for common standards providing customers with flexibility. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

IMU 4000 Rental - EMC Partner Generator EFT to 4.4kv, Surge to 4.1kV, Dips With Built-in Single Phase Coupler (Optional IEC 61000-4-16)

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU4000 is a single unit testing system for EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11and CE Mark. With the common mode available for testing to EN IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

UCS 500N7 Rental - EM Test EFT to 5.5kV, Surge to 7kV and 100kHz Ring to 6kV, Built-in Single Phase Power Coupler

The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A. 

This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.

The UCS500n7 includes many reprogrammed test routines ideal for testing to EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11EN IEC 61000-4-12, CEMarkANSI IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. 

RENTAL

TRA3000 Rental - EMC Partner EMC Immunity Test Generator (common mode & dips)

The EMC Partner TRA3000 EMI (Optional: Common Mode or Dips/Interruptstest generator is an all in one unit testing solution for testing EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The TRA 3000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The TRA3000 is a single unit testing system for EN IEC 61000-4-4, EN IEC 61000-4-5and CE Mark. With the common mode or dips/interrupts available for testing to EN IEC 61000-4-11 and EN IEC 61000-4-16, this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

EMCPro Plus Rental - Keytek Immunity Surge & Transient Generator

The EMCPro Plus made by Thermo Fisher Scientific / Keytek is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.

This EMI immunity Surge, EFT, Ring Wave, and Dips Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. The EMCPro also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMCPro Plus is designed to test for a variety of EMC immunity industry standards including EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11EN IEC 61000-4-12CEMark, and ANSI IEEE C62.41 cat. B. The EMCPro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

RENTAL

NSG3060 CDN3061 Rental - Teseq EFT to 4.8kV, Surge and Ringwave to 6.6kV, Includes Single Phase Coupler for IEC 61000

The Teseq NSG 3060 is an EMC Immunity Tester for EFT to 4.8kV, Surge to 6.6kV, 100 kHz Ringwave to 6.6kV and offers solutions for both CE mark & ANSI testing. This product is the combination of the NSG 3060 and CDN 3061 (single phase coupler) which can be priced separately. A2LA accredited calibration is included in the EMC rental equipment price. 

The NSG 3060 CDN 3061 offers a user friendly design to help streamline testing to EN IEC 61000-4-4, EN IEC 61000-4-5EN 61000-4-12,ANSI C62.41C62.45, and UL 1449.  It offers a a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel.  Expansion capabilities enable the system to be configured for a much broader range of applications including 10/700 Telecom Surge and Magnetic Field tests.

Dips and Interrupts available per IEC 61000-4-11 with optional INA 6502. The automated single-phase coupling network incorporates surge and burst coupling for continuous EUT currents of up to 16 A and complies to the requirements for the surge standard IEC/EN 61000-4-5:2005, as well the coupling modes given in the ANSI C62.45 standard and for burst standard IEC/EN 61000-4-4:2005.

Showing 1 to 9 of 16 products