Contact Us
EM Test Dito ESD Gun Rent & Buy - Official US Distributor
EM Test Dito Test Accessories
Description
Overview
Rent the Dito by EM Test a hand-held, lightweight ESD simulator that allows for air discharge to 16.5kV and contact mode to 10kV for testing to IEC 61000-4-2. A2LA accredited calibration is included in the EMC rental equipment price.Transient Specialists is the only authorized sale partner of EM Test ESD simulators in the United States. EM Test a leading manufacturer of electronic test equipment has created this product to simulate an electrostatic discharge between two different objects including the human body.
The Dito rental comes with an 150pF/330Ω discharge network for testing to IEC 61000-4-2 and other EMC immunity testing standards. This cordless ESD simulator is powered by a rechargeable battery and has enough energy to 50,000 pulses at 16.5kV. Discharge tips and discharge networks can easily be changed without disassembling the gun; simply remove one and plug-on another tip or module
This EM Test generator comes with pre-programmed test routines allowing for user to easily test to EN IEC 61000-4-2, ANSI C63.16, and many others. The discharge modules are automatically recognized and the R/C configuration is shown in the display of the test equipment. The display is easy to manipulate and requires minimal effort to change testing parameters. The Dito rental comes with both air and contact discharge tips.
Data Sheet User Manual Quick Reference GuideSpecifications
|
Common ESD Standards |
|
|
RC Network |
150 pf/ 330 ohm |
|
Voltage Range Air Discharge |
500V to 16.5kV ±5% |
|
Voltage Range Contact Mode |
500V to 10kV ±5% |
|
Polarity |
Positive, negative |
|
Resolution |
100V |
|
Holding time |
More than 5 seconds |
|
Test voltage |
measured, indicated in the display |
|
Single mode |
Release of single pulses |
|
Continuous mode |
Continuous discharge up to 20Hz (AD) and 10Hz (CD) |
|
Pulse release via software |
Remote control from computer via fiber optic link (USB) |
|
CD mode |
EN/IEC 61000-4-2; 150pF/330ohm |
|
Rise time |
0.8ns +/- 25% |
|
Easy Zap |
Test based on standard levels |
|
Quick Zap |
All test parameters are adjustable during test; fast and easy-to-use |
|
Standard Test routines |
As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2 |
|
Repetition Rate |
Single shot mode, 1 shot/sec, 20 shots/sec AD, 10 shots/sec CD |
|
Programmable |
Yes, preprogrammed test routines included |
|
Remote Control |
Via USB fiber optic link |
|
Battery Recharge Time |
ACCU battery Less than 1.5 hours |
|
Useable During Recharge |
No |
|
Weight |
940 grams, 2.1 pounds |
|
Dimensions |
33x13x8cm, 13x5x3 inches |
All Accessories
Additional Testing Accessories Dito ESD Simulator:
| INA/ITEM # | Description |
| DM1-RFCI | Fast Relay Discharge module with 150pF/330ohm; Rise time 200ps - 300ps |
|
Dito Battery Charger |
|
| 104877 |
ESD.controlSoftware for dieo, ESD 30N with optolink cable |
| DM2 |
Discharge module 150pF/2,000ohm |
| DM3 |
Discharge module 330pF/2,000ohm |
| DM4 |
Discharge module 100pF/1,500ohm |
| DMx |
Customer specific discharge module |
| VCP |
Vertical coupling plane 50cm x 50cm, incl. EAS 30 grounding set 2x470kohm |
| EAS 30 |
Grounding set 2x470kohm |
| MAD |
Power mains adaptor |
General ESD Testing Accessories:
| INA/ITEM # | Description |
| MD 102 | MD 102A Calibration target as per IEC 61000-4-2 with 2ohm for calibration/verification |
| INA 414-2M | Bleeder resistor cable (2x470 kOhms) - Length 2 meters |
| INA 414 |
Bleeder resistor cable (2x470 kOhms) - Length 80 cm |
| INA 102A | 50 Ohm Calibration adapter for MD 102 |
| INA 417B | Opto-link to a PC with 10 m opto-cable |
Videos
Transient Specialists: ESD Simulator Comparison
Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions
features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD
testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,
modifying testing parameters, used market considerations, and others.
info@transientspecialists.com
