ETS-Lindgren HI-6006

Rent 6 GHz E-Field Probe
  • Frequency Range 100 kHz - 6 GHz
  • Field Strength 0.5 - 800 V/m
  • Suitable for IEC 61000-4-3 Field Verification
  • Includes Optical to PC USB Port (HI-4413USB)
  • Current ISO 17025 Accredited Calibration
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental


ETS-Lindgren's Model HI-6006 Electric Field Probe is a fully intelligent sensor enabling fast and accurate EMF measurements with industry leading performance specifications. Optical coupling to a variety of readout options makes this probe ideally suited for a wide range of Field monitoring applications.

Designed to be single range reading, the HI-6006 RF eld probe can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed. A unique feature of the HI-6006 is the replaceable battery. This battery allows the user to replace the battery when necessary, without requiring additional calibration. Simple in-eld synchronization of the HI-6006 is all that is required for proper battery level monitoring.

The HI-6100 Field Monitor provides manual functions and programmed control via IEEE-488 and RS232 Serial Data Interfaces. Readings from up to four eld probes can be displayed simultaneously. The EMCenter™ Modular RF Platform along with the EMSense™ interface card can be used with the HI-6000 series Field probes as a eld monitor in addition to its capability as a system level platform. For direct connection to a PC, either the HI-4413P Serial or the HI-4413USB interfaces are available.

Frequency Range
100kHz to 6GHz
Isotropic (X, Y and Z Axis Readings)
Frequency Response:: (Typical)
500 kHz to 2 GHz +1.0, -2.5 dB
2 to 5.5 GHz +3.5, -4.5 dB
5.5 to 6 GHz +2.0, -6.0 dB
Frequency Response with Correction:
100 kHz to 6 GHz +/- 0.9 dB
Dynamic Range
0.5 to 800 V/m (Single Range)
0.01 V/m
Isotropic Deviation:
0.5 dB +/- @ 400 MHz
0.5 dB +/- (1 to 800 V/m)
Sample Rate (Typical):
70 Samples/Second Maximum
Overload Withstand:
>1500 V/m CW
4.8 V NiMH, up to 8 Hours of operation
Physical Interface:
Duplex Optical Fiber (200 Micron Multimode); FSMA Connectors. Integral 1m Optical Cable
Battery Charger:
100-240 VAC Universal Input; 3-Hour Charge from Full Depletion
Cubical Housing Height:
32 mm (1.26 in)
Sensor Protection Caps Height:
43 mm (1.69 in)
0.5 dB +/- (1 to800 V/m)
Sample Rate (Typical):
70 Samples/Second Maximum
Overload Withstand:
>1500 V/m CW
4.8 V NiMH, up to 8 Hours of operation
0.5 dB +/- (1 to800 V/m)
Video Guides
ETS Lindgren HI-6006 Overview & Video Guide
Related Videos
Amplifier Research FL8018 Kit AR Probe Kit Overview & Setup