RENTAL
MIL-STD-461 CS116 Accessory Package - Injection Probes, Cal Fixtures, attenuators and monitoring probe
The Solar CS116 accessory package is a complete accessory package for CS115 and CS116 testing with the Solar Electronics 9354-2 including calibration fixtures and attenuators. High power transient generators with source impedances from 0.25 Ω to 50 Ω can use this probe to deliver high peak voltage or high current pulses into the wires or cables passing through the window of the device.
The unique winding arrangement of this impedance matching probe provides step-up or step-down ratios with respect to either: 1) the source impedance of the connected generator, when used for injection, or 2) the load impedance of the connected receiver, when used for reception. This results in maximum power transfer into or out of the transformer winding formed by the cable bundle passing through the window.
The Solar CS116 accessory package is a complete accessory package for CS115 and CS116 testing with the Solar Electronics 9354-2 including calibration fixtures and attenuators. High power transient generators with source impedances from 0.25 Ω to 50 Ω can use this probe to deliver high peak voltage or high current pulses into the wires or cables passing through the window of the device.
The unique winding arrangement of this impedance matching probe provides step-up or step-down ratios with respect to either: 1) the source impedance of the connected generator, when used for injection, or 2) the load impedance of the connected receiver, when used for reception. This results in maximum power transfer into or out of the transformer winding formed by the cable bundle passing through the window.
|
Common Standards |
MIL-STD-461 CS116, MIL-STD-461 CS115 |
|
Solar 9335-2 |
Coupling Clamp |
|
Voltage or Current transfer |
1:1 |
|
Voltage step-up (current step-down) |
1:1.5,3:1 |
|
Voltage step-down(current step-up) |
2:1 |
|
Source Impedance |
>.25Ω to 50Ω |
|
Weight |
8.36 lbs. |
|
Solar 9123 |
Clamp on Current Probe |
|
Dimensions |
13.97cm X20.32cm X 16.86cm (5.5” X 8” X 6.64”) |
|
Maximum Input Current |
60 Amps |
|
Weight |
1.9kg (4.2 lbs.) |
|
Solar 9125 |
Calibration fixture for the Solar 9233 |
|
Frequency Range |
20Hz to 500MHz |
|
Weight |
4.08 kg (9 lbs.) |
|
Dimensions |
32-44mm, 1.5” diameter window |
|
Solar 9142N |
Bulk Current Injection Probe |
|
Frequency Range |
2MHz to 500 MHz |
|
Window Diameter |
38mm(1.50”) |
|
Maximum Input Power |
200 Watts |
|
Maximum Input Current |
50 Amps |
|
Weight |
1.9kg (4.2 lbs.) |
|
Also includes: |
9841-1 50 ohm load, 9410-1, 9454-1 attenuators, 9357-1 calibration fixture. |
I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.
Scott D., TUV SUD Canada
Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!
John H., Gates Air, Inc.
Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.
Adam P., Clark Testing
Working for a testing company I deal with renting equipment all the time. Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.
Richard T., National Technical Systems
