NSG 435 Rent & Buy New - Teseq (Schaffner) ESD Simulator

Teseq ESD Gun - US Distributor

NSG 435 Rent & Buy New - Teseq (Schaffner) ESD Simulator

Availability: In Stock - Order by 3PM Ships Today!

ESD Gun Features 

      • Air Discharge - 16.5kV Contact-discharge - 9kV (100V Steps)
      • Buy/Rent from Sole US Distributor!
      • 2 Year Manufacturer Warranty on New Purchases
      • IEC 61000-4-2 ESD Solution, includes 150pF/330Ω Network
      • Adjustable +/- Polarity and Test Accessories Available 
      • True air-discharge breakdown voltage & Air and Contact Tips
      • Easy to use intuitive design, point and test
      • All Rentals - ISO 17025 Cal & 2 Days Transit Time

Overview

The Teseq (Schaffner) NSG 435 is a comprehensive ESD Gun/Simulation System for air discharge to 16.5kV and contact mode to 9kV. Transient Specialists is the only authorized sale partner/distributor of Teseq ESD simulators in the United States. It comes with an 150pF/330Ω discharge network for IEC 61000-4-2 testing and tips for both air and contact discharge. All of our rental equipment comes with an accredited A2LA ISO 17025 calibration standard, with no additional costs. 

Take advantage of a two year manufacturer's warranty on parts and labor when purchasing an NSG 435 test system. We also offer a variety of accessories, tips, and additional networks allowing for enhanced testing capabilities. Often times the simulators and accessories are in stock, allowing for immediate or near immediate delivery to your testing location.

The pistol-shaped NSG 435 ESD Gun is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible. It also allows for use in environments without easily accessible power supplies where other test equipment require additional consideration. The user-selected test parameters are shown on the LCD panel and easily adjusted with the keypad. 

This ESD simulators microprocessor-based controller and multi function keypad provide the operator with instant access to its comprehensive range of built-in functions. The product comes with many standards test settings pre-programmed to allow for tests to be run efficiently. The voltage of this Teseq product can also be programmed from 200 V to 16.5 kV depending on your immunity testing requirements.

Teseq, a leading manufacturer of EMC test equipment offers this base line simulator as part of a the NSG series of simulators. It provides all the necessary requirements for many common standards and field testing requirements. The series of simulators includes 30kV capable simulators, including the NSG 437 and NSG 438. 

$295.00

NSG 435 ESD Test Accessories

ESD Gun Features 

      • Air Discharge - 16.5kV Contact-discharge - 9kV (100V Steps)
      • Buy/Rent from Sole US Distributor!
      • 2 Year Manufacturer Warranty on New Purchases
      • IEC 61000-4-2 ESD Solution, includes 150pF/330Ω Network
      • Adjustable +/- Polarity and Test Accessories Available 
      • True air-discharge breakdown voltage & Air and Contact Tips
      • Easy to use intuitive design, point and test
      • All Rentals - ISO 17025 Cal & 2 Days Transit Time

Overview

The Teseq (Schaffner) NSG 435 is a comprehensive ESD Gun/Simulation System for air discharge to 16.5kV and contact mode to 9kV. Transient Specialists is the only authorized sale partner/distributor of Teseq ESD simulators in the United States. It comes with an 150pF/330Ω discharge network for IEC 61000-4-2 testing and tips for both air and contact discharge. All of our rental equipment comes with an accredited A2LA ISO 17025 calibration standard, with no additional costs. 

Take advantage of a two year manufacturer's warranty on parts and labor when purchasing an NSG 435 test system. We also offer a variety of accessories, tips, and additional networks allowing for enhanced testing capabilities. Often times the simulators and accessories are in stock, allowing for immediate or near immediate delivery to your testing location.

The pistol-shaped NSG 435 ESD Gun is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible. It also allows for use in environments without easily accessible power supplies where other test equipment require additional consideration. The user-selected test parameters are shown on the LCD panel and easily adjusted with the keypad. 

This ESD simulators microprocessor-based controller and multi function keypad provide the operator with instant access to its comprehensive range of built-in functions. The product comes with many standards test settings pre-programmed to allow for tests to be run efficiently. The voltage of this Teseq product can also be programmed from 200 V to 16.5 kV depending on your immunity testing requirements.

Teseq, a leading manufacturer of EMC test equipment offers this base line simulator as part of a the NSG series of simulators. It provides all the necessary requirements for many common standards and field testing requirements. The series of simulators includes 30kV capable simulators, including the NSG 437 and NSG 438. 

Data Sheets User Manual Teseq - ESD Brochure

Common Standards

EN/IEC 61000-4-2 & ANSI C63.16

Voltage Range Air Discharge       

200 V to 16.5 kV (in 100 V steps)

Voltage Range Contact Mode

200 V to 9 kV (in 100 V steps)

RC Network

330 ohm / 150 pF


Basic set:

Carrying case with: electrostatic discharge simulator, battery pack, battery charger 100 to 240 VAC, discharge network 150 pF/330 Ω, air- and contact-discharge tips, grounding cable, tripod adapter, user manual

Pulse network:

Range of R/C networks for other standards: R = 0 Ω to 10 kΩ; C = 60 to 500 pF

Charging voltage measurement:

kV, accuracy better than ±5% (stabilized); measurement and display of true air fl ashover voltage

Discharge detection:

Indicated by an oval around the kV symbol, also acoustically in the 'Single' operating mode (air-discharge only)

Operating modes:

Single / repetitive = pulse counter: 0 to 9999, preselect counter 0 to 9999 Repetition: 0.5/1/5/10/20 or 25 Hz (air); 0.5/1/5 or 10 Hz (contact); continuous operation

Holding time

>5 s (charging voltage…±5%)

Repetition Rate

0.5/1/5/10/20 or 25 Hz (air),

0.5/1/5 or 10 Hz (contact)

Programmable

No

Pulse data

– standard Conforms to IEC/EN 61000-4-2 – special With exchangeable networks/test fingers for other standards

Test finger -standard

Ball and point as per IEC/EN, exchangeable via locking ring

Power supply

Battery in handgrip, exchangeable, charging time: approx. 3 hours Mains power unit as an accessory

Display

LCD panel showing – Discharge voltage – Breakdown voltage – Polarity – Air- / contact-discharge – Counter / preselect counter content – Soft-key functions – Battery monitor

Weight

1.2 kg (2.6 lbs)

Buy from Sole US Distributor for Teseq & EM Test ESD Simulators & Accessories

There are a variety of testing accessories that are included with the simulator itself and that are available for purchase.

Below is a comprehensive list of common accessories and spare parts. As the distributor we can offer fast delivery and lower

pricing then third parties, including Ebay. All of the ESD accessoires we sell come with a 2 year manufacturer warranty. Part

numbers (manufacturer) and INA are subject to change. The list below includes the basic inventory included with the

purchase, rental, or lease of this test equipment.

 

Included with standard rental/purchase of Simulator(basic set):

    • ESD Simulator/Gun
    • Printed Manual
    • Calibration Documentation
    • Air Discharge Tip
    • Contact Discharge tip
    • Ground Strap
    • Tripod Attachment 
    • Power Charger
    • Power Adapters (4)
    • Plastic Case 

NSG 435 Testing Accessories ESD Simulator:

INA/ITEM # Description

INA XXX

Special Discharge Network - Customization of Resistance Capacitance

INA 424

Air discharge tip for NSG 434 and NSG 435

INA 425

Contact discharge tip for NSG 434 and NSG 435

INA 405

Spare battery pack. Not always compatible with prior chargers

INA 402 

Mains Power Supply (80...240 V, 50/60 Hz)

INA 415

Remote triggering unit incl. 5 m opto-cable

INA 423

Tripod support for NSG 435

INA 421 

Test finger and RC network for IEC 801-2, 1984

INA 420

Special test tip for fast rise time. Where the rise time of 0,8 ns specified in most standards represents more than 80% of real cases, in extreme cases an ESD event may be faster. This can be simulated using this fast rise time test finger which generates rise times around 0,4 ns.

171-508

Battery pack charger

 

 

General ESD Testing Accessories:

INA/ITEM # Description
MD 102 MD 102A Calibration target as per IEC 61000-4-2 with 2ohm for calibration/verification 
INA 414-2M Bleeder resistor cable (2x470 kOhms) - Length 2 meters
INA 414

Bleeder resistor cable (2x470 kOhms) - Length 80 cm

INA 102A 50 Ohm Calibration adapter for MD 102
INA 417B Opto-link to a PC with 10 m opto-cable

 

Transient Specialists: Teseq NSG 435 Video Guide & Overview 

 

Description: Video provides information on how you will receive ESD Gun. It provides basics on many common

accessories, including battery, simulator, charger, air/contact discharge tips and grounding cable. Provides

step-by-step instructions benefits of purchasing through distributor rather then through Ebay. Final component

includes adjusting test parameters through interface.

Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

Teseq: NSG series of Simulators

 

Description: This video made by Teseq, formerly Schaffner, offer a video guide for the NSG series of simulators,

which include the NSG 435, NSG 437, NSG 438, and NSG 439. This video is a brief overview of each ESD Gun/test system.

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established time frames. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems

Refunds - If you are not satisfied with your purchase, please contact us within 24 hours of receipt of the equipment and you can return the product and get a full refund or exchange the product for another unit.

 

Warranty - Ametek CTS puts a two year warranty on parts/labor on all ESD Simulators/Guns. With that being said, as the US distributor for Teseq and EM Test, Transient Specialists can over this warranty at time of sale. 

Comparable EMC Systems

Capabilities & Voltage +/- 16.5kV Air & 9kV Contact Discharge +/-16kV Air & 10kV Contact Discharge +/-16kV Air & 8kV Contact Discharge +/-16.5kV Air & 10kV Contact Discharge
Manufacturer Teseq (Ametek) EMC Partner Thermo Fisher Scientific (Keytek) EM Test (Ametek)
Steps/Resolution 100 Volts 100 Volts 10 Volts 100 Volts
Networks/Accessories Replacement Parts Custom, New, & Used Custom, New, & Used Mainly Used, Some Difficult to Find Custom, New, & Used
System Features Large Screen & Easy to Use Interface System 30kV Capable (Expandable) & AA Battery Powered Rugged Design, Industry Standard, & Used Market Reverse Current Monitoring & Ergonomic Design