Rent Amplifiers & Antennas - C Band, TWT, RF Amplifiers

The CBA 1G-600B has the capacity to produce a 600W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a  excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.

This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452,  RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.

Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).

The AS0860 amplifier has the frequency range of 800MHz to 6GHz up to 50 watts and be controlled via front panel or with a laptop or computer. This test equipment can be easily integrated into Teseq, EM Test, and Milmega product setups. It is designed to ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output. The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.

This EMC test equipment is powered from a high efficiency power supply with a high power factor and wide range of voltage operations.The unit is air-cooled with integral fans, is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. 

Our amplifiers provide turnkey solutions coming with required cords and accessories. The front panel display provides immediate results and allows for quick modification of testing parameters. It also provides operational status and heatsink temperature. To supplement testing requirements we also offer a variety of other antennas and amplifiers making Transient Specialists the go-to resource for rentals.

The Teseq CBA 1G-300B produces 80MHz to 1GHz 300W capabilities in a compact system with easy to use touch screen display. This amplifier provides a minimum of 250 watts of linear power lending itself to RF immunity testing to various industry standards including IEC 61000-4-3, MIL-STD 461, ISO 11452
and RTCA DO160. It can be controlled either through the front panel screen or via laptop through USB, GPIB, RS232 and Ethernet connections.

This EMC (electromagnetic comparability) test equipment allows for easy integration with preexisting testing systems. It is often included in test setups with associated Teseq products including the NSG 4070 and ITS 6006. Reverse and forward power as well as, diagnostic information can be seen immediate through the front panel screen. 

Our Amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).

The Teseq CBA 400M-110 can supply 110Watt into a 50 ohm load over the range of 10kHz-400Mhz. This mismatch tolerant and unconditionally stable Class A broadband amplifier is ideal for bulk current injection (BCI) EMC Testing including automotive, military, and aerospace applications. This test equipment is powered by a switch mode power supply, is air cooled with integral fans, and protected against faulty cooling via temperature sensing.

This equipment provides testing to a wide variety of EMC immunity testing. It provides indicator lights for radio frequency (RF) interlock operations and over-temperature. The unique construction of this test equipment will continue to work at full power when presented with an open or short circuit at its output. This easy to use test system allows for easy testing to EN/IEC 61000-4-6, CISPR 24, and many other standards.

All of our power supplies come with all required cords for use and provide a turnkey testing solution. We also carry a variety of other amplifiers including the CBA 1G-300 (80Mhz-1Ghz 300W) and TI88-250 (7.5Ghz-18Ghz 250W) to facilitate higher frequency and power testing needs. This product requires mains plug only be connected in a socket providing protective earth contact.

The IFI T188-250 Amplifier which can produce 250W in the 7.5GHz to 18GHz frequency range. These are "state of the art" and have field proven reliability and unsurpassed performance as the best in the industry. This test system makes an excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.

This test equipment has a backlit LCD display allowing for easy modification of testing parameters. This screen shows forward/reverse power indication, system status, and self-diagnostic information. The selection switches on the right of the front panel allow the user to easily select the desired mode if not being controlled via laptop. 

This solid state power supply is designed to meet a wide variety of standards including MIL-STD-461 RS103, ISO 11452, and DO 160 sec20. This IFI product is easily integrated into a preexisting setup often and reliable rugged construction lends itself well to any testing environment. This amplifier comes with all required cords and testing accessories arriving at test location ready for testing to begin. 

The IFI S251-300 allows for up to 300W within the frequency range of 800MHz-2GHz. This solid state, rugged amplifier is designed for use for a variety of applications with communication features needed for today’s automated test systems. The durability of this system is also apparent in the variety of protection including VSWR, over-current, voltage protection, and airflow sensors for the module and the system level.

This EMC (electromagnetic comparability) test equipment allows for easy integration with preexisting testing systems. It is often included in test setups with associated Teseq and IFI products including the NSG 4070 and ITS 6006. Reverse and forward power as well as, diagnostic information can be seen immediate through the front panel screen. 

Our Amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including the AS0860-50 (800Mhz-6Ghz 50W) and CBA 1G-600B (80MHz-2Ghz 600W).

The AS0860 amplifier has the frequency range of 800MHz to 6GHz up to 30 watts and be controlled via front panel or with a laptop or computer. This test equipment can be easily integrated into Teseq, EM Test, and Milmega product setups. It is designed to ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output. The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.

This EMC test equipment is powered from a high efficiency power supply with a high power factor and wide range of voltage operations.The unit is air-cooled with integral fans, is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifier into standby mode. 

Our amplifiers provide turnkey solutions coming with required cords and accessories. The front panel display provides immediate results and allows for quick modification of testing parameters. It also provides operational status and heatsink temperature. To supplement testing requirements we also offer a variety of other antennas and amplifiers making Transient Specialists the go-to resource for rentals.

The LSProbe1.2 3D E-Field probe made by Lumiloop provides the standard frequency range of 10 kHz to 6 GHz. This laser-powered, fast response probe with continuous real-time data drive probe utilizes linearization technology providing dynamic range up to 100 dB. The Lumiloop LSProbe1.2 is rugged and reliable system also provides best-in-class frequency and temperature compensation. 

This 3D E-Field probe is galvanically insulated laser power supply eliminates the need for batteries and not limited to the acquisition of quasi-static fields. Multiple LSProbes may be connected to one TCP Server instance to form a Multiprobe System consisting of synchronized E-field probes which is especially suitable for field distribution analysis, statistical field analysis and reverberation chamber applications.

Rent the EFG-3B E-Field Antenna for up to 2kW of power over 10kHz to 220 MHz frequency range. It is made to generate electric field intensities within limits for radiated susceptibility testing systems. This test equipment is ideal for easy integration with Teseq, EM Test, and Milmega setups. It is effective given the design as a radiating transmission line. This equipment can be rented in with an amplifier or individually to supplement testing capabilities.