EMC Partner IMU4000
Included Accessories
Can't find something? Contact UsRelated Equipment
Description
The tester IMU4000 simulates transients of different interference sources. Such as: indirect lightning in electronic systems, human body electrostatic discharges, switched inductance (Burst), power supply interruptions and variations and common mode disturbance.
The test system IMU4000 with accessories fulfils all requirements of the IEC basic standards 61000-4-2 Ed.2 (ESD); 61000-4-4 Ed.3 (EFT); 61000-4-5 Ed.3 (SURGE); impulse; 61000-4-11 Ed.2 (Interruption and Variations), and with accessories 61000-4-8 Ed.2 (Magnetic field 50/60Hz) and 61000-4-9 Ed.1 (Magnetic field SURGE), 61000-4-29 Ed.1 dips and interruption on d.c. and IEC 61000-4-34, DIPS and Interruption >16A per phase.
If not all transient test are needed, the IMU4000 tester is also available in various versions, with the possibility to upgrade the tester later to a full IMU4000 test system.
- Mainframe Specifications:
- IMU4000 Control features
- User Interface
- 7 Inch Colour touch panel
- Operating System
- EMC PARTNER (EPOS)
- Communication Interface
- Ethernet
- Accessory control interface
- RS485
- Atmospheric measurement
- Temperature, humidity, pressure (with accessory)
- BNC monitor ports
- EUT plus IMPULSE voltage & current
- Trigger mode
- Auto, manual, external
- Synchro source
- EUT power, Impulse out, External
- Synchro on / off
- 0 Degrees up to 360 Degrees
- IMU4000 Coupling Decoupling Network
- Maximum AC voltage
- 280V
- Maximum DC voltage
- 300V
- Maximum EUT current
- 16A
- Frequency range
- DC up to 60Hz
- Power frequency synchro
- 16.7 up to 60Hz
- Coupling EFT
- L, N, PE, L+N, L+PE, N+PE, L+N+PE, direct
- Coupling CWG
- L-N, L-PE, N-PE, direct
- Electrical Fast Transient (Burst)
- EXT-TRA3000 F
- EFT 4 kV
- Voltage range
- 0.25 up to 4.4kV
- Voltage amplitude into 50ohm
- 0.125 up to 2.0kV
- Voltage amplitude into 1kohm
- 0.24 up to 4.0kV
- Surge Impulses
- EXT-TRA3000 S
- CWG 4 kV
- Voltage range
- 0.25 up to 4.1kV
- Current range
- 0.125 up to 2.05kA
- Source impedance
- 2ohm
- Serial resistance common mode
- 10ohm
- Pulse front time at open circuit
- 1.2us
- Pulse duration at open circuit
- 50us
- Pulse front time at short circuit
- 8us
- Pulse duration at short circuit
- 20us
- Pulse repetition
- up to 60 pulses per minute
- Pulse repetition at maximum voltage
- 6 pulses per minute
- Polarity
- Positive / Negative / Alternating
- Programmable parameter ramps
- voltage, synchronisation, polarity
- Synchronisation on power line frequencies
- Yes
- Voltage Dips
- EXT-TRA3000 D
- AC Dips
- Voltage range
- 0 up to 250V
- Frequency range with variac
- 48 up to 60Hz
- Nominal current
- 16A
- Interruption time
- 50us up to 30s
- Amplitude interrupt with internal variac
- 0 up to 100% max. 5A
- Phase angle to turn on and off
- 0 Degrees up to 360 Degrees
- Voltage variation with internal variac
- 0 up to 110% max. 5A
- Interrupt less than 1 period
- Input by phase angle
- Interrupt more than 1 period
- Input in milli seconds
- Programmable parameter ramps
- voltage, synchronisation, interrupt
- Rise and fall time at 100ohm load
- 1 up to 5us
- Option 3.2 Special Program
- 50ms Interrupt test to IEC 62052-11
info@transientspecialists.com