Description
Overview
The EM test CCI capacitive coupling clamp is an ideal solution for testing electrical fast transients/burst onto data lines. This accessory is designed for use with the EM Test series of generators including the UCS 200N and NX series. The clamp, however can also be used with a variety of generators depending upon the type of connection that is required. The IEC 61000-4-4 Ed 3.0 published 2012 recomends the calibration of the capacitive coupling clamp into a 50ohm coaxial load with the normative calibration kit CCI PVKIT 1.
The coupling of the Electrical Fast Transients EFT/burst to signal lines can usually not be achieved by discrete capacitive coupling without interfering with the signal flow The interference simulator can be connected on both sides of the coupling clamp.
Rent both power and data line CDNs designed for meeting a variety of EUT/DUT immunity testing requirements. We offer both manual and automatic power mains CDNs up to 125 Amps meeting the newest requirements of IEC 61000-4-5.
Specifications
Common Standards |
EN/IEC 61000-4-4 |
Max. permissible burst voltage |
7 kV |
Dimension Coupling plate |
140 mm x 1000 mm |
Height |
GND - Coupling plate, 100 mm |
Connector |
High voltage connector, coaxial |
GND connection |
4 mm plug, banana |
EUT cable |
up to 40 mm diameter |
Weight |
10.6 kg |