Class A Broadband Amplifier
CBA 400M-110 Rental - Teseq Amplifier 10kHz-400Mhz, 110W
Teseq Broad Band Amplifier Features
- Class A Broadband Amplifier
- 1MHz-400MHz 100 Watts Capabilities
- Compact Design & Touch Screen Color display
- Free Technical Support & 2 Days Free Transit
- Easily Integrated & Ideal for BCI testing
- Mismatch tolerant and unconditionally stable
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CBA 400M-110 can supply 110Watt into a 50 ohm load over the range of 10kHz-400Mhz. This mismatch tolerant and unconditionally stable Class A broadband amplifier is ideal for bulk current injection (BCI) EMC Testing including automotive, military, and aerospace applications. This test equipment is powered by a switch mode power supply, is air cooled with integral fans, and protected against faulty cooling via temperature sensing.
This equipment provides testing to a wide variety of EMC immunity testing. It provides indicator lights for radio frequency (RF) interlock operations and over-temperature. The unique construction of this test equipment will continue to work at full power when presented with an open or short circuit at its output. This easy to use test system allows for easy testing to EN/IEC 61000-4-6, CISPR 24, and many other standards.
All of our power supplies come with all required cords for use and provide a turnkey testing solution. We also carry a variety of other amplifiers including the CBA 1G-300 (80Mhz-1Ghz 300W) and TI88-250 (7.5Ghz-18Ghz 250W) to facilitate higher frequency and power testing needs. This product requires mains plug only be connected in a socket providing protective earth contact.
Rental Amplifiers Within Frequency
Broadband Power Amplifier
Teseq Broad Band Amplifier Features
- Class A Broad Band Amplifier
- 80Mhz-1Ghz 600 Watts Capabilities
- Compact Design & Touch Screen Color display
- Free Technical Support & 2 Days Free Transit
- Easily Integrated with Teseq NSG 4070
- Built-in Calibrated Directional Coupler
- Turnkey Solution - Arrives Ready for Testing!
Overview
The CBA 1G-600B has the capacity to produce a 600W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.
This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452, RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.
Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).
Broadband Power Amplifier
Teseq Broad Band Amplifier Features
- Class A Broad Band Amplifier
- 89Mhz-1Ghz 300 Watts Capabilites
- Compact Design & Touch Screen Color display
- Free Technical Support & 2 Days Free Transit
- Easily Integrated with Teseq NSG 4070
- Built-in Calibrated Directional Coupler
- Turnkey Solution - Arrives Ready for Testing!
Overview
The CBA 1G-300D has the capacity to produce a 300W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.
This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452, RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.
Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).
Broadband Power Amplifier
Teseq Broad Band Amplifier Features
- Class A Broadband Amplifier
- 89Mhz-1Ghz 150 Watts Capabilites
- Compact Design & Touch Screen Color display
- Free Technical Support & 2 Days Free Transit
- Easily Integrated with Teseq NSG 4070
- Built-in Calibrated Directional Coupler
- Turnkey Solution - Arrives Ready for Testing!
Overview
The CBA 1G-150D has the capacity to produce a 150W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.
This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452, RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.
Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).
Teseq Broad Band Amplifier Features
- Class A Broadband Amplifier
- 1MHz-400MHz 100 Watts Capabilities
- Compact Design & Touch Screen Color display
- Free Technical Support & 2 Days Free Transit
- Easily Integrated & Ideal for BCI testing
- Mismatch tolerant and unconditionally stable
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CBA 400M-110 can supply 110Watt into a 50 ohm load over the range of 10kHz-400Mhz. This mismatch tolerant and unconditionally stable Class A broadband amplifier is ideal for bulk current injection (BCI) EMC Testing including automotive, military, and aerospace applications. This test equipment is powered by a switch mode power supply, is air cooled with integral fans, and protected against faulty cooling via temperature sensing.
This equipment provides testing to a wide variety of EMC immunity testing. It provides indicator lights for radio frequency (RF) interlock operations and over-temperature. The unique construction of this test equipment will continue to work at full power when presented with an open or short circuit at its output. This easy to use test system allows for easy testing to EN/IEC 61000-4-6, CISPR 24, and many other standards.
All of our power supplies come with all required cords for use and provide a turnkey testing solution. We also carry a variety of other amplifiers including the CBA 1G-300 (80Mhz-1Ghz 300W) and TI88-250 (7.5Ghz-18Ghz 250W) to facilitate higher frequency and power testing needs. This product requires mains plug only be connected in a socket providing protective earth contact.
Data SheetUser Manual|
Common Standards |
EN/IEC 61000-4-6, CISPR 24, EN 61000-4-1, EN 61000-4-2, IEC 60601-1-2, MIL-STD-461, ISO 11452 (3-5) |
| Frequency Range (Instantaneous) |
10 kHz to 400 MHz |
|
Rated Output Power |
110 W Minimum |
|
Output Power at 1dB Gain Compression |
80 W Minimum (110 W typical below 100 MHz) |
| Gain | 51 dB |
|
Harmonics at P1 dB |
± 20 dBc |
| Impedance/VSWR |
|
|
Output VSWR tolerance |
infinity |
|
Stability |
Unconditional |
|
Output impedance |
50 Ω |
|
Input VSWR |
2:1 |
| Additional RF Data | |
|
Third order intercept point |
61 dBm |
|
RF connector style |
Type N female |
|
Electrical and Interfaces |
|
|
USB interface |
Optional |
|
Dual safety interlock |
Two BNC female connectors S / C to mute and O / C to mute |
|
Supply voltage |
100 to 240 Vac (+ / - 10%) |
|
Supply frequency range |
45 to 63 Hz |
|
Supply power |
<1 kVA (typical 700 VA) |
|
EMC & Safety |
|
|
Conducted & Radiated Emissions |
EN 61326 Class A |
| Conducted & Radiated Immunity | EN 61326: 1997 Table 1 |
| Mains Harmonics Current | EN 61000-3-2 |
| Voltage Fluctuations & Flickr | EN 61000-3-3 |
| Safety | EN 61010-1 |
Widely Used Standards
- IEC/EN 61000-4-6
- CISPR 24
- EN 61000-6-1
- EN 61000-6-2
- IEC 60533
- IEC 60601-1-2
- IEC 61326
- MIL STD 461
- RTCA/DO 160
- ISO 11452-3
- ISO 11452-4
- ISO 11452-5
- SAE J1113-4
- SAE J1113-24
| Models/Options | Watts |
| CBA 400M-110 | 110 Watts |
| CBA 400M-260 | 260 Watts |
| 341-745 | Bench Model with front panel Mounted input/output connectors |
| 341-845 | Rack mountable with front panel Mounted input/output connectors |
| 341-945 | Rack mountable with rear Panel Mounted input/output connectors |
I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.
Scott D., TUV SUD Canada
Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!
John H., Gates Air, Inc.
Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.
Adam P., Clark Testing
Working for a testing company I deal with renting equipment all the time. Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.
Richard T., National Technical Systems
